Ok Booting now - but kernel cant handle the disks :(
Hi all,
Ok I took the drives out and mounted them using mdadm under ubuntu and
copied over the initrd.img and vmlinuz files. I then installed those onto
the flash using
load -v -r -b 0x.... -m ymodem ramdisk.gz
fis unlock -f 0x... -l 0x
fis create ramdisk.gz
I did a similar process for the vmlinuz as zImage. The system now boots
but seems to have some problems reading the 1 terrabyte disks.
Long dmesg below.
Thanks for all the help.
-------------------
Begin: Loading essential drivers ... [42949377.040000] SCSI subsystem
initialized
[42949377.230000] scsi0 : sata_vsc
[42949377.230000] scsi1 : sata_vsc
[42949377.230000] scsi2 : sata_vsc
[42949377.240000] scsi3 : sata_vsc
[42949377.240000] ata1: SATA max UDMA/133 mmio m4096@0x800c0000 port
0x800c0200 irq 27
[42949377.250000] ata2: SATA max UDMA/133 mmio m4096@0x800c0000 port
0x800c0400 irq 27
[42949377.260000] ata3: SATA max UDMA/133 mmio m4096@0x800c0000 port
0x800c0600 irq 27
[42949377.270000] ata4: SATA max UDMA/133 mmio m4096@0x800c0000 port
0x800c0800 irq 27
[42949377.620000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949407.640000] ata1.00: qc timeout (cmd 0x27)
[42949407.640000] ata1.00: failed to read native max address (err_mask=0x4)
[42949407.650000] ata1.00: HPA support seems broken, skipping HPA handling
[42949407.650000] ata1: failed to recover some devices, retrying in 5 secs
[42949413.020000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949413.080000] ata1.00: configured for UDMA/133
[42949413.430000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949443.450000] ata2.00: qc timeout (cmd 0x27)
[42949443.450000] ata2.00: failed to read native max address (err_mask=0x4)
[42949443.460000] ata2.00: HPA support seems broken, skipping HPA handling
[42949443.460000] ata2: failed to recover some devices, retrying in 5 secs
[42949448.830000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949448.890000] ata2.00: configured for UDMA/133
[42949449.240000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949479.260000] ata3.00: qc timeout (cmd 0x27)
[42949479.260000] ata3.00: failed to read native max address (err_mask=0x4)
[42949479.270000] ata3.00: HPA support seems broken, skipping HPA handling
[42949479.270000] ata3: failed to recover some devices, retrying in 5 secs
[42949484.640000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949484.700000] ata3.00: configured for UDMA/133
[42949485.050000] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949515.070000] ata4.00: qc timeout (cmd 0x27)
[42949515.070000] ata4.00: failed to read native max address (err_mask=0x4)
[42949515.080000] ata4.00: HPA support seems broken, skipping HPA handling
[42949515.080000] ata4: failed to recover some devices, retrying in 5 secs
[42949520.450000] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949520.510000] ata4.00: configured for UDMA/133
[42949520.510000] scsi 0:0:0:0: Direct-Access ATA ST31000528AS
CC35 PQ: 0 ANSI: 5
[42949520.520000] scsi 1:0:0:0: Direct-Access ATA ST31000528AS
CC35 PQ: 0 ANSI: 5
[42949520.530000] scsi 2:0:0:0: Direct-Access ATA ST31000528AS
CC35 PQ: 0 ANSI: 5
[42949520.550000] scsi 3:0:0:0: Direct-Access ATA ST31000528AS
CC35 PQ: 0 ANSI: 5
done.
Begin: Running /scripts/init-premount ... [42949522.060000] Driver 'sd'
needs updating - please use bus_type methods
[42949522.180000] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors
(1000205 MB)
[42949522.180000] sd 0:0:0:0: [sda] Write Protect is off
[42949522.190000] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[42949522.240000] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors
(1000205 MB)
[42949522.240000] sd 0:0:0:0: [sda] Write Protect is off
[42949522.250000] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[42949522.260000] sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0
action 0x6 frozen
[42949552.260000] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[42949552.260000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[42949552.280000] ata1.00: status: { DRDY }
[42949552.280000] ata1: hard resetting link
[42949552.630000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42949552.690000] ata1.00: configured for UDMA/133
[42949552.690000] ata1: EH complete
[42949582.690000] ata1: limiting SATA link speed to 1.5 Gbps
[42949582.690000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[42949582.700000] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[42949582.700000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[42949582.710000] ata1.00: status: { DRDY }
[42949582.720000] ata1: hard resetting link
[42949583.070000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[42949583.130000] ata1.00: configured for UDMA/133
[42949583.130000] ata1: EH complete
[42949613.130000] ata1.00: limiting speed to UDMA/100:PIO4
[42949613.130000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[42949613.140000] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[42949613.140000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[42949613.150000] ata1.00: status: { DRDY }
[42949613.160000] ata1: hard resetting link
[42949613.510000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[42949613.570000] ata1.00: configured for UDMA/100
[42949613.570000] ata1: EH complete
[42949643.570000] ata1.00: limiting speed to UDMA/33:PIO4
[42949643.570000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[42949643.580000] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[42949643.580000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[42949643.590000] ata1.00: status: { DRDY }
[42949643.600000] ata1: hard resetting link
[42949643.950000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[42949644.010000] ata1.00: configured for UDMA/33
[42949644.010000] ata1: EH complete
[42949652.560000] INFO: task modprobe:396 blocked for more than 120 seconds.
[42949652.560000] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[42949652.570000] modprobe D c021cd94 0 396 394
[42949652.580000] [<c021ca34>] (schedule+0x0/0x3ac) from [<c021cffc>]
(io_schedule+0x64/0xb4)
[42949652.580000] [<c021cf98>] (io_schedule+0x0/0xb4) from [<c006ee28>]
(sync_page+0x50/0x5c)
[42949652.590000] r5:c04f3520 r4:cf72ba74
[42949652.600000] [<c006edd8>] (sync_page+0x0/0x5c) from [<c021d2bc>]
(__wait_on_bit_lock+0x60/0x94)
[42949652.610000] [<c021d25c>] (__wait_on_bit_lock+0x0/0x94) from
[<c006edb0>] (__lock_page+0x68/0x78)
[42949652.620000] r8:00000000 r7:00000000 r6:cf802148 r5:c04f3520
r4:cf72ba74
[42949652.620000] [<c006ed48>] (__lock_page+0x0/0x78) from [<c006f598>]
(read_cache_page_async+0xe4/0x154)
[42949652.630000] r5:00000000 r4:c04f3520
[42949652.640000] [<c006f4b4>] (read_cache_page_async+0x0/0x154) from
[<c00712a4>] (read_cache_page+0x14/0x58)
[42949652.650000] [<c0071290>] (read_cache_page+0x0/0x58) from
[<c00d3f4c>] (read_dev_sector+0x40/0x94)
[42949652.660000] r4:00000000
[42949652.660000] [<c00d3f0c>] (read_dev_sector+0x0/0x94) from
[<c00d476c>] (adfspart_check_ICS+0x30/0x19c)
[42949652.670000] r6:cf7aa000 r5:00000000 r4:c00d473c
[42949652.670000] [<c00d473c>] (adfspart_check_ICS+0x0/0x19c) from
[<c00d45c0>] (rescan_partitions+0x118/0x294)
[42949652.680000] [<c00d44a8>] (rescan_partitions+0x0/0x294) from
[<c00bc168>] (do_open+0x248/0x300)
[42949652.690000] [<c00bbf20>] (do_open+0x0/0x300) from [<c00bc290>]
(__blkdev_get+0x70/0x78)
[42949652.700000] [<c00bc220>] (__blkdev_get+0x0/0x78) from [<c00bc2ac>]
(blkdev_get+0x14/0x18)
[42949652.710000] [<c00bc298>] (blkdev_get+0x0/0x18) from [<c00d442c>]
(register_disk+0xe8/0x164)
[42949652.720000] [<c00d4344>] (register_disk+0x0/0x164) from [<c0128318>]
(add_disk+0x50/0x9c)
[42949652.730000] r7:cf671400 r6:00000000 r5:bf04c5ec r4:cf671600
[42949652.730000] [<c01282c8>] (add_disk+0x0/0x9c) from [<bf049608>]
(sd_probe+0x2b0/0x39c [sd_mod])
[42949652.740000] r5:bf04c5ec r4:cf671408
[42949652.750000] [<bf049358>] (sd_probe+0x0/0x39c [sd_mod]) from
[<c016c9e0>] (driver_probe_device+0xf4/0x1a8)
[42949652.760000] [<c016c8ec>] (driver_probe_device+0x0/0x1a8) from
[<c016cae4>] (__driver_attach+0x50/0x74)
[42949652.770000] r6:cf6d6158 r5:bf04c5ec r4:cf6d60b0
[42949652.770000] [<c016ca94>] (__driver_attach+0x0/0x74) from
[<c016c004>] (bus_for_each_dev+0x4c/0x84)
[42949652.780000] r6:c016ca94 r5:cf72be04 r4:00000000
[42949652.780000] [<c016bfb8>] (bus_for_each_dev+0x0/0x84) from
[<c016c800>] (driver_attach+0x20/0x28)
[42949652.790000] r7:00000001 r6:cf67af00 r5:bf04c5ec r4:00000000
[42949652.800000] [<c016c7e0>] (driver_attach+0x0/0x28) from [<c016c4a8>]
(bus_add_driver+0xa8/0x218)
[42949652.810000] [<c016c400>] (bus_add_driver+0x0/0x218) from
[<c016cce8>] (driver_register+0x98/0x11c)
[42949652.820000] [<c016cc50>] (driver_register+0x0/0x11c) from
[<bf009c4c>] (scsi_register_driver+0x18/0x20 [scsi_mod])
[42949652.830000] [<bf009c34>] (scsi_register_driver+0x0/0x20 [scsi_mod])
from [<bf04e05c>] (init_sd+0x5c/0xa0 [sd_mod])
[42949652.840000] [<bf04e000>] (init_sd+0x0/0xa0 [sd_mod]) from
[<c005d510>] (sys_init_module+0x16e4/0x17f0)
[42949652.850000] r5:cf74ef60 r4:cf74ef88
[42949652.850000] [<c005be2c>] (sys_init_module+0x0/0x17f0) from
[<c0024a60>] (ret_fast_syscall+0x0/0x3c)
[42949674.000000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[42949674.000000] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[42949674.000000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
Reply to: