Re: SATA No partitionable media were found
Lennart Sorensen wrote:
> On Tue, Apr 26, 2005 at 11:29:18PM +0200, Susanne Wenz wrote:
>> lspci -n |grep 010:
>> 0000:00:02.5 0101: 1039:5513 (rev 01)
>> 0000:00:05.0 0104: 1039:0182 (rev 01)
>
> The 0182 (SI sata/"raid" controller I imagine) is not supported in
> 2.6.11 and below (it might be in 2.6.12 or something).
>
> 0181 and 0180 are supported so it is probably not much work to add
> support for the newer model.
>
> For now you appear to be out of luck with SATA on that chipset. It does
> not currently have support in Linux as far as I can tell.
>
Hi Len, hi all,
now my system seems to work (don't know whether it will be stable). Here is,
what I did:
I bought an ide disk and installed it with the sarge-i386-1.iso and
2.6.8-kernel, installed the module sata_sis. After that I could
partition /dev/sda and copy my /dev/hda to it.
I asked ASUS for drivers and got this answer:
...
here is the SIS SATA driver for different Linux core :
http://driver2.sis.com/linux/raid/sis18x_2.6.10_1.00.00.tgz
http://driver2.sis.com/linux/raid/sis18x_2.6.9_1.00.00.tgz
but the onboard lan for K8S-MX ,no Linux driver now :(
...
I compiled a 2.6.10 kernel (without (M) DEVICE DRIVERS--> CHARACTER
DEVICES---> 3Dlabs, because it caused an error)
and the sis sata drivers and put the modules sata_sis, libata, scsi_mod and
sd_mod into /etc/mkinitrd/modules.
We had some problems with grub till everything was ok, but now it boots
from /dev/sda and hda is deinstalled.
Thank you everybody for your help!
Susanne
Reply to: