Re: Re: New netinst iso
Goswin-
I apologize for the mixup:
Oops: That was actually an error reading the Release file not Packages file as previously here:
The 18 Feb sarge-amd64-netinst.iso Installer error message
said: "error reading /cdrom/dists//Release "
I am fairly sure that would be the same as this showing the
same type of failure:
root@workstation:~> cat /mnt/iso9660/dists/sarge/Release
attempt to access beyond end of device
loop0: rw=0, want=260716, limit=224649
Buffer I/O error on device loop0, logical block 65178
root@workstation:~> ls -al /mnt/iso9660/dists/sarge
total 7
drwxr-sr-x 3 theme theme 2048 2005-02-18 13:02 .
drwxr-sr-x 3 theme theme 2048 2005-02-18 13:02 ..
drwxr-sr-x 4 theme theme 2048 2005-02-18 13:02 main
-rw-r--r-- 1 theme theme 545 2005-02-18 13:02 Release
root@workstation:~>
I took the 18 Feb image downloaded from alioth and mounted
that to loop iso9660 and found the above. That must be
the same error as during the CDROM run of the Installer.
Here is the 18 Feb image that caused the problem:
2cb2cc2fe9544547dac49d0b8a26dd31 sarge-amd64-netinst.iso
I really apologize for writing Packages file when I should
have written Release file.
......... must sleep
editor@postscript.port5.com
--
AMD Athlon64 @2.4Ghz Corsair TwinX1024-3200XL @480Mhz DDR
ASUS A8V Deluxe Pro ASUS Radeon A9250Ge/Td/256
Creative SB Live WD Raptor SATA Maxtor PATA IBM/Okidata
Color PostScript3 Lexmark Mono PostScript2
Debian GNU/Linux debian-amd64/pure64 sid Kernel 2.6.10
XFree86 4.3.0 Xorg X11R6.8.2 1.5 Mb DSL
Reply to: