Re: Installation disks should be using 2.6.10 kernel
On Wed, Jan 12, 2005 at 10:13:50AM -0500, Stephen Frost wrote:
> execve("/sbin/grub", ["grub", "--batch", "--device-map=/boot/grub/device.map"], [/* 39 vars */]) = 0
> uname({sys="Linux", node="elros", ...}) = 0
> brk(0) = 0x80dc000
> brk(0x80fd000) = 0x80fd000
> sync() = 0
> old_mmap(0x40100000000000, 146028888067, PROT_READ|PROT_WRITE|PROT_EXEC|PROT_SEM|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff0, 0xa /* MAP_??? */, 4095, 0x80dc340080dac5c) = 0x55555000
> open("/boot/grub/device.map", O_RDONLY|0x8000) = 3
> fstat64(0x3, 0xffffc07c) = 0
> old_mmap(0x100000000000, 146028888067, PROT_READ|PROT_WRITE|PROT_EXEC|PROT_SEM|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff0, MAP_SHARED|MAP_DENYWRITE, 0, 0x1000081a4) = 0x55956000
> read(3, "(hd0)\t/dev/sda\n(hd1)\t/dev/sdb\n", 4096) = 30
> read(3, "", 4096) = 0
> close(3) = 0
> munmap(0x55956000, 4096) = 0
> sync() = 0
> open("/dev/sda", O_RDWR|0x8000) = 3
> read(3, "\353H\220\20\216\320\274\0\260\270\0\0\216\330\216\300"..., 512) = 512
> ioctl(3, 0x301, 0x555bcc98) = 0
> ioctl(3, BLKGETSIZE, 0x555bcc94) = 0
> ioctl(3, BLKFLSBUF, 0) = 0
> open("/dev/sdb", O_RDWR|0x8000) = -1 ENXIO (No such device or address)
> fstat64(0x1, 0x555bcdb4) = 0
> old_mmap(0x100000000000, 146028888067, PROT_READ|PROT_WRITE|PROT_EXEC|PROT_SEM|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff0, 0x3 /* MAP_??? */|MAP_NORESERVE|MAP_POPULATE|MAP_GROWSDOWN|MAP_DENYWRITE|MAP_EXECUTABLE|MAP_LOCKED|0x400, 1442545993, 0x1000081a4) = 0x55956000
> fstat64(0, 0x555bcd94) = 0
> old_mmap(0x100000000000, 146028888067, PROT_READ|PROT_WRITE|PROT_EXEC|PROT_SEM|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff0, 0x3 /* MAP_??? */|MAP_NORESERVE|MAP_POPULATE|MAP_GROWSDOWN|MAP_DENYWRITE|MAP_EXECUTABLE|MAP_LOCKED|0x400, 135059904, 0x1000081a4) = 0x55957000
> read(0, "root (hd0,0)\nsetup --stage2=/boo"..., 4096) = 77
> ioctl(3, BLKFLSBUF, 0) = 0
> _llseek(3, 0, 0, 0x555bcab4 /* SEEK_??? */) = 0
> read(3, "\353H\220\20\216\320\274\0\260\270\0\0\216\330\216\300"..., 512) = 512
> read(3, "RV\276\3!\350*\1^\277\370!f\213-\203}\4\0\17\204\312\0"..., 31744) = 31744
> _llseek(3, 32256, ptrace: umoven: Input/output error
> 0x7e00, 0x555bcda4 /* SEEK_??? */) = 0
> read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32256) = 32256
[snip]
Sorry, but nothing obvious is showing up from the strace.
Next step, is to compare .config files from 2.6.9 and 2.6.10.
To check the difference between the two kernels.
You can report to the LKML too.
Reply to: