On 9/10/07, Joe MacDonald <joe.macdonald@gmail.com
> wrote:
Thanks, Jörg,
Assuming there's no magic solution in the SCSI trace I just sent out, I'll follow up in a few hours with the results of testing cdrecord in my WinXP install and my try at it with the SchilliX CD. I'm downloading it now and it looks like it should be done by the time I'm ready to try it out.
So I downloaded a copy of the latest cdrtools from
http://www.student.tugraz.at/thomas.plank/ and gave it a try on my WinXP install. Other than the drive showing up at a different spot (2,0,0 rather than 1,0,0) it seemed to behave the same as the -scanbus in Linux, but when I went to burn an audio disc everything worked great. So I'm guessing this is an indication of a problem in the Linux device driver, maybe at the SATA level, maybe in SG?
Do you still want me to try this with the Solaris CD? I can't seem to find any BIOS option that'll let me force it into PATA compat mode (which doesn't really surprise me, the BIOS on this board seems curiously light on some options), so I'm suspecting it's just not going to work since you've already found problems with this SATA device in the past.
What would you like me to try next?
Joe@Skynet ~/cdrtools-2.01.01a35-win32-bin
$ ./cdrecord.exe -scanbus
Cdrecord-ProDVD-ProBD-Clone 2.01.01a35 (i686-pc-cygwin) Copyright (C) 1995-2007
Jцrg Schilling
Using libscg version 'schily-0.9'.
scsibus0:
0,0,0 0) 'ST325082' '4A ' '3.AA' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) HOST ADAPTOR
scsibus1:
1,0,0 100) *
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) HOST ADAPTOR
scsibus2:
2,0,0 200) 'HL-DT-ST' 'DVDRAM GSA-H62N ' 'CL00' Removable CD-ROM
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) HOST ADAPTOR
scsibus3:
3,0,0 300) 'JY7912V ' 'HWG710G ' '
1.0 ' Removable CD-ROM
3,1,0 301) 'JY7912V ' 'HWG710G ' '1.0 ' Removable CD-ROM
3,2,0 302) *
3,3,0 303) *
3,4,0 304) *
3,5,0 305) *
3,6,0 306) *
3,7,0 307) HOST ADAPTOR
scsibus4:
4,0,0 400) 'USB2.0 ' 'CF CardReader ' ' ' Removable Disk
4,1,0 401) *
4,2,0 402) *
4,3,0 403) *
4,4,0 404) *
4,5,0 405) *
4,6,0 406) *
4,7,0 407) HOST ADAPTOR
scsibus5:
5,0,0 500) 'USB2.0 ' 'CBO CardReader ' ' ' Removable Disk
5,1,0 501) *
5,2,0 502) *
5,3,0 503) *
5,4,0 504) *
5,5,0 505) *
5,6,0 506) *
5,7,0 507) HOST ADAPTOR
Joe@Skynet ~/cdrtools-
2.01.01a35-win32-bin
$ ./cdrecord.exe -v speed=1 -audio dev=2,0,0 Blues\ Traveller/Carolina\ Blues.w
av Blues\ Traveller/01\ Felicia.wav Blues\ Traveller/02\ Justify\ the\ Thrill.w
av Blues\ Traveller/03\ Canadian\
Rose.wav Blues\ Traveller/04\ Business\ as\ U
sual.wav Blues\ Traveller/05\ Yours.wav Blues\ Traveller/06\ Psycho\ Joe\ \(Goe
s\ to\ the\ Electric\ Chair\).wav Blues\ Traveller/07\ Great\ Big\ World.wav Bl
ues\ Traveller/08\ Battle\ of\
Someone.wav Blues\ Traveller/09\ Most\ Precariou
s.wav Blues\ Traveller/10\ The\ Gunfighter.wav Blues\ Traveller/11\ Last\ Night
\ I\ Dreamed.wav Blues\ Traveller/12\ Make\ My\ Way.wav
./cdrecord: No write mode specified.
./cdrecord: Asuming -sao mode.
./cdrecord: If your drive does not accept -sao, try -tao.
./cdrecord: Future versions of cdrecord may have different drive dependent defau
lts.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a35
(i686-pc-cygwin) Copyright (C) 1995-2007
Jцrg Schilling
TOC Type: 0 = CD-DA
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R (current)
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYE
R_JUMP
Drive buf size : 1053696 = 1029 KB
Drive pbuf size: 1966080 = 1920 KB
Drive DMA Speed: 14304 kB/s 81x CD 10x DVD 3x BD
FIFO size : 4194304 = 4096 KB
Track 01: audio 47 MB (04:44.49) no preemp
Track 02: audio 47 MB (04:
42.58) no preemp
Track 03: audio 41 MB (04:06.45) no preemp
Track 04: audio 45 MB (04:31.92) no preemp
Track 05: audio 53 MB (05:17.92) no preemp
Track 06: audio 66 MB (06:34.58) no preemp
Track 07: audio 39 MB (03:
55.21) no preemp
Track 08: audio 56 MB (05:36.98) no preemp
Track 09: audio 61 MB (06:03.16) no preemp
Track 10: audio 34 MB (03:27.41) no preemp
Track 11: audio 49 MB (04:57.18) no preemp
Track 12: audio 42 MB (04:
10.38) no preemp
Track 13: audio 74 MB (07:24.29) no preemp
Total size: 661 MB (65:32.60) = 294945 sectors
Lout start: 661 MB (65:34/45) = 294945 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Capacity Blklen/Sparesz. Type
0 2048 No Media Present or Unknown Capacity
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 64901
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Sending CUE sheet...
./cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
[remainder snipped for brevity]