Thanks for the suggestions. Here some results of my new trials 1) boot with nouveau.noaccel=1 in kernel line TTY and X badly screwed up 2) boot with nouveau.nofbaccel=1 in kernel line TTY badly screwed up, X distorted as in the plain case 3) boot with Option "NoAccel" "On" X distorted 4) Booted with experimenta kernel linux-image-3.5-trunk-686-pae Version: 3.5.2-1~experimental.1 black TTY and black X so I cannot document this. I've reported the bug upstream https://bugs.freedesktop.org/show_bug.cgi?id=54700 (but I reported the bug with the old kernel, the new one breaks the system badly) As for the driver modesetting, I use Package: xserver-xorg-video-modesetting State: installed Automatically installed: no Version: 0.3.0-1 # cat /etc/modprobe.d/blacklist-nouveau.conf blacklist nouveau # cat /etc/X11/xorg.conf.d/98-me Section "Device" Identifier "Device0" Driver "modesetting" BusID "pci:0000:01:00.0" EndSection but nouveau is still loaded. (I attach dmsg and Xorg.log if somebody can understand why I cannot start modesetting, maybe the pci data I used are wrong ... I'm really incompetent!) Cheers ric
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffae000 (usable) [ 0.000000] BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Dell Computer Corporation Inspiron 8500 /00U838, BIOS A03 05/23/2003 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ffae max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 36cba000 - 37655000 [ 0.000000] ACPI: RSDP 000fdf00 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 3fff0000 00028 (v01 DELL CPi R 27D30517 ASL 00000061) [ 0.000000] ACPI: FACP 3fff0400 00074 (v01 DELL CPi R 27D30517 ASL 00000061) [ 0.000000] ACPI: DSDT 3fff0c00 02C35 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ffff800 00040 [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003ffae [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffae [ 0.000000] On node 0 totalpages: 261949 [ 0.000000] free_area_init_node: node 0, pgdat c140d680, node_mem_map f64ba200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 268 pages used for memmap [ 0.000000] HighMem zone: 33956 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f79e8000 s33280 r0 d24064 u57344 [ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259901 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=UUID=75240409-3b94-48af-89c6-86e6f9c5e2ff ro quiet long_buf_len=1M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0003ffae) [ 0.000000] Memory: 1023676k/1048248k available (2836k kernel code, 24120k reserved, 1343k data, 412k init, 136896k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc1415000 - 0xc147c000 ( 412 kB) [ 0.000000] .data : 0xc12c51ec - 0xc1414f40 (1343 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c51ec (2836 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2392.654 MHz processor. [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.30 BogoMIPS (lpj=9570616) [ 0.008011] pid_max: default: 32768 minimum: 301 [ 0.008073] Security Framework initialized [ 0.008086] AppArmor: AppArmor disabled by boot time parameter [ 0.008111] Mount-cache hash table entries: 512 [ 0.008337] Initializing cgroup subsys cpuacct [ 0.008346] Initializing cgroup subsys memory [ 0.008361] Initializing cgroup subsys devices [ 0.008365] Initializing cgroup subsys freezer [ 0.008369] Initializing cgroup subsys net_cls [ 0.008373] Initializing cgroup subsys blkio [ 0.008383] Initializing cgroup subsys perf_event [ 0.008434] CPU0: Hyper-Threading is disabled [ 0.008440] mce: CPU supports 4 MCE banks [ 0.008553] SMP alternatives: switching to UP code [ 0.016637] Freeing SMP alternatives: 8k freed [ 0.016645] ACPI: Core revision 20110623 [ 0.018695] ACPI: setting ELCR to 0200 (from 0800) [ 0.020115] weird, boot CPU (#0) not listed by the BIOS. [ 0.020118] SMP motherboard not detected. [ 0.020122] Local APIC not detected. Using dummy APIC emulation. [ 0.020124] SMP disabled [ 0.020128] Performance Events: Netburst events, [ 0.020134] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.020136] no hardware sampling interrupt available. [ 0.020142] Netburst P4/Xeon PMU driver. [ 0.020147] ... version: 0 [ 0.020150] ... bit width: 40 [ 0.020152] ... generic registers: 18 [ 0.020154] ... value mask: 000000ffffffffff [ 0.020157] ... max period: 0000007fffffffff [ 0.020159] ... fixed-purpose events: 0 [ 0.020162] ... event mask: 000000000003ffff [ 0.020463] NMI watchdog disabled (cpu0): not supported (no LAPIC?) [ 0.020490] Brought up 1 CPUs [ 0.020494] Total of 1 processors activated (4785.30 BogoMIPS). [ 0.020755] devtmpfs: initialized [ 0.021342] print_constraints: dummy: [ 0.021427] NET: Registered protocol family 16 [ 0.021591] ACPI: bus type pci registered [ 0.057085] PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2 [ 0.057089] PCI: Using configuration type 1 for base access [ 0.058181] bio: create slab <bio-0> at 0 [ 0.058314] ACPI: Added _OSI(Module Device) [ 0.058318] ACPI: Added _OSI(Processor Device) [ 0.058323] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.058327] ACPI: Added _OSI(Processor Aggregator Device) [ 0.059026] ACPI: EC: Look up EC in DSDT [ 0.063763] ACPI: Interpreter enabled [ 0.063787] ACPI: (supports S0 S1 S3 S4 S5) [ 0.063824] ACPI: Using PIC for interrupt routing [ 0.082468] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.082475] HEST: Table not found. [ 0.082485] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.086041] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.093077] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.093083] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.093087] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.093091] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.093096] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfed9ffff] (ignored) [ 0.093100] pci_root PNP0A03:00: host bridge window [mem 0xfee00000-0xffafffff] (ignored) [ 0.093121] pci 0000:00:00.0: [8086:1a30] type 0 class 0x000600 [ 0.093134] pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref] [ 0.093203] pci 0000:00:01.0: [8086:1a31] type 1 class 0x000604 [ 0.093279] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03 [ 0.093332] pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f] [ 0.093379] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03 [ 0.093432] pci 0000:00:1d.1: reg 20: [io 0xbf40-0xbf5f] [ 0.093476] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03 [ 0.093528] pci 0000:00:1d.2: reg 20: [io 0xbf20-0xbf3f] [ 0.093586] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03 [ 0.093613] pci 0000:00:1d.7: reg 10: [mem 0xf4fffc00-0xf4ffffff] [ 0.093724] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.093731] pci 0000:00:1d.7: PME# disabled [ 0.093754] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.093810] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601 [ 0.093908] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101 [ 0.093926] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.093938] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.093950] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.093963] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.093975] pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf] [ 0.093987] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.094033] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401 [ 0.094053] pci 0000:00:1f.5: reg 10: [io 0xb800-0xb8ff] [ 0.094065] pci 0000:00:1f.5: reg 14: [io 0xbc40-0xbc7f] [ 0.094077] pci 0000:00:1f.5: reg 18: [mem 0xf4fff800-0xf4fff9ff] [ 0.094089] pci 0000:00:1f.5: reg 1c: [mem 0xf4fff400-0xf4fff4ff] [ 0.094144] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.094150] pci 0000:00:1f.5: PME# disabled [ 0.094171] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703 [ 0.094191] pci 0000:00:1f.6: reg 10: [io 0xb400-0xb4ff] [ 0.094203] pci 0000:00:1f.6: reg 14: [io 0xb080-0xb0ff] [ 0.094274] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.094280] pci 0000:00:1f.6: PME# disabled [ 0.094315] pci 0000:01:00.0: [10de:0286] type 0 class 0x000300 [ 0.094334] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff] [ 0.094345] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf3ffffff pref] [ 0.094381] pci 0000:01:00.0: reg 30: [mem 0x80000000-0x8001ffff pref] [ 0.094455] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.094460] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.094465] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.094470] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.094500] pci 0000:02:00.0: [14e4:4401] type 0 class 0x000200 [ 0.094520] pci 0000:02:00.0: reg 10: [mem 0xfaffe000-0xfaffffff] [ 0.094599] pci 0000:02:00.0: supports D1 D2 [ 0.094602] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.094608] pci 0000:02:00.0: PME# disabled [ 0.094631] pci 0000:02:01.0: [104c:ac44] type 2 class 0x000607 [ 0.094652] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.094685] pci 0000:02:01.0: supports D1 D2 [ 0.094688] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.094694] pci 0000:02:01.0: PME# disabled [ 0.094717] pci 0000:02:01.1: [104c:8029] type 0 class 0x000c00 [ 0.094737] pci 0000:02:01.1: reg 10: [mem 0xfaffd800-0xfaffdfff] [ 0.094750] pci 0000:02:01.1: reg 14: [mem 0xfaff8000-0xfaffbfff] [ 0.094826] pci 0000:02:01.1: supports D1 D2 [ 0.094829] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot [ 0.094835] pci 0000:02:01.1: PME# disabled [ 0.094890] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.094896] pci 0000:00:1e.0: bridge window [io 0xd000-0xefff] [ 0.094902] pci 0000:00:1e.0: bridge window [mem 0xf6000000-0xfbffffff] [ 0.094909] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.094913] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.094957] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02] [ 0.094973] pci_bus 0000:00: on NUMA node 0 [ 0.094978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.095269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.095331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.095526] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.108203] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.108320] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 [ 0.108432] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.108543] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.108636] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.108754] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.108986] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.108993] vgaarb: loaded [ 0.108996] vgaarb: bridge control possible 0000:01:00.0 [ 0.109059] PCI: Using ACPI for IRQ routing [ 0.109066] PCI: pci_cache_line_size set to 64 bytes [ 0.109144] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.109149] reserve RAM buffer: 000000003ffae000 - 000000003fffffff [ 0.109353] Switching to clocksource pit [ 0.110972] pnp: PnP ACPI init [ 0.111011] ACPI: bus type pnp registered [ 0.115084] pnp 00:00: [mem 0x00000000-0x0009fbff] [ 0.115089] pnp 00:00: [mem 0x0009fc00-0x0009ffff] [ 0.115093] pnp 00:00: [mem 0x000c0000-0x000cffff] [ 0.115096] pnp 00:00: [mem 0x000e0000-0x000fffff] [ 0.115100] pnp 00:00: [mem 0x00100000-0x3ffeffff] [ 0.115104] pnp 00:00: [mem 0x3fff0000-0x3fffffff] [ 0.115107] pnp 00:00: [mem 0xfeda0000-0xfedfffff] [ 0.115111] pnp 00:00: [mem 0xffb00000-0xffbfffff] [ 0.115221] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved [ 0.115227] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved [ 0.115232] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.115236] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.115241] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved [ 0.115245] system 00:00: [mem 0x3fff0000-0x3fffffff] has been reserved [ 0.115250] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved [ 0.115254] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.115261] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.118815] pnp 00:01: [bus 00-ff] [ 0.118820] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.118824] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.118827] pnp 00:01: [io 0x0d00-0xffff window] [ 0.118831] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.118835] pnp 00:01: [mem 0x000d0000-0x000dffff window] [ 0.118839] pnp 00:01: [mem 0x40000000-0xfed9ffff window] [ 0.118842] pnp 00:01: [mem 0xfee00000-0xffafffff window] [ 0.118932] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.118967] pnp 00:02: [io 0x0092] [ 0.118971] pnp 00:02: [io 0x00b2] [ 0.118975] pnp 00:02: [io 0x0020-0x0021] [ 0.118978] pnp 00:02: [io 0x00a0-0x00a1] [ 0.118982] pnp 00:02: [irq 2 disabled] [ 0.118985] pnp 00:02: [io 0x04d0-0x04d1] [ 0.118988] pnp 00:02: [io 0x0800-0x0805] [ 0.118991] pnp 00:02: [io 0x0808-0x080f] [ 0.119060] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.119065] system 00:02: [io 0x0800-0x0805] has been reserved [ 0.119069] system 00:02: [io 0x0808-0x080f] has been reserved [ 0.119073] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.119102] pnp 00:03: [io 0xf400-0xf4fe] [ 0.119106] pnp 00:03: [io 0x0086] [ 0.119109] pnp 00:03: [io 0x00b3] [ 0.119112] pnp 00:03: [io 0x0806-0x0807] [ 0.119115] pnp 00:03: [io 0x0810-0x085f] [ 0.119118] pnp 00:03: [io 0x0860-0x087f] [ 0.119121] pnp 00:03: [io 0x0880-0x08bf] [ 0.119124] pnp 00:03: [io 0x08c0-0x08df] [ 0.119127] pnp 00:03: [io 0x08e0-0x08ff] [ 0.119190] system 00:03: [io 0xf400-0xf4fe] has been reserved [ 0.119195] system 00:03: [io 0x0806-0x0807] has been reserved [ 0.119199] system 00:03: [io 0x0810-0x085f] has been reserved [ 0.119203] system 00:03: [io 0x0860-0x087f] has been reserved [ 0.119207] system 00:03: [io 0x0880-0x08bf] has been reserved [ 0.119211] system 00:03: [io 0x08c0-0x08df] has been reserved [ 0.119215] system 00:03: [io 0x08e0-0x08ff] has been reserved [ 0.119220] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.119250] pnp 00:04: [irq 12] [ 0.119299] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.119326] pnp 00:05: [io 0x0060] [ 0.119331] pnp 00:05: [io 0x0064] [ 0.119335] pnp 00:05: [irq 1] [ 0.119377] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.119403] pnp 00:06: [io 0x0070-0x0071] [ 0.119407] pnp 00:06: [irq 8] [ 0.119411] pnp 00:06: [io 0x0072-0x0077] [ 0.119452] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.119481] pnp 00:07: [io 0x0061] [ 0.119485] pnp 00:07: [io 0x0063] [ 0.119488] pnp 00:07: [io 0x0065] [ 0.119491] pnp 00:07: [io 0x0067] [ 0.119535] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.119562] pnp 00:08: [io 0x002e-0x002f] [ 0.119567] pnp 00:08: [io 0x004e-0x004f] [ 0.119570] pnp 00:08: [io 0x0900-0x097f] [ 0.119632] system 00:08: [io 0x0900-0x097f] has been reserved [ 0.119638] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.119668] pnp 00:09: [dma 4] [ 0.119672] pnp 00:09: [io 0x0000-0x000f] [ 0.119676] pnp 00:09: [io 0x0080-0x0085] [ 0.119679] pnp 00:09: [io 0x0087-0x008f] [ 0.119682] pnp 00:09: [io 0x00c0-0x00df] [ 0.119685] pnp 00:09: [io 0x0010-0x001f] [ 0.119688] pnp 00:09: [io 0x0090-0x0091] [ 0.119691] pnp 00:09: [io 0x0093-0x009f] [ 0.119736] pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.119763] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.119767] pnp 00:0a: [irq 13] [ 0.119810] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.125602] pnp 00:0b: [irq 4] [ 0.125606] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.125718] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.135238] pnp 00:0c: [dma 1] [ 0.135243] pnp 00:0c: [irq 7] [ 0.135247] pnp 00:0c: [io 0x0378-0x037f] [ 0.135250] pnp 00:0c: [io 0x0778-0x077b] [ 0.135417] pnp 00:0c: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.136414] pnp: PnP ACPI: found 13 devices [ 0.136418] ACPI: ACPI bus type pnp unregistered [ 0.136424] PnPBIOS: Disabled by ACPI PNP [ 0.174314] Switching to clocksource acpi_pm [ 0.174358] pci 0000:01:00.0: no compatible bridge window for [mem 0x80000000-0x8001ffff pref] [ 0.174367] PCI: max bus depth: 2 pci_try_num: 3 [ 0.174406] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] [ 0.174415] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff]) [ 0.174421] pci 0000:00:1e.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref] [ 0.174428] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] [ 0.174433] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.174437] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.174443] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.174448] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.174458] pci 0000:02:01.0: BAR 0: assigned [mem 0xf8000000-0xf8000fff] [ 0.174465] pci 0000:02:01.0: BAR 0: set to [mem 0xf8000000-0xf8000fff] (PCI address [0xf8000000-0xf8000fff]) [ 0.174472] pci 0000:02:01.0: BAR 16: assigned [mem 0x48000000-0x4bffffff] [ 0.174477] pci 0000:02:01.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref] [ 0.174482] pci 0000:02:01.0: BAR 14: assigned [io 0xd000-0xd0ff] [ 0.174486] pci 0000:02:01.0: BAR 13: assigned [io 0xd400-0xd4ff] [ 0.174490] pci 0000:02:01.0: CardBus bridge to [bus 03-06] [ 0.174493] pci 0000:02:01.0: bridge window [io 0xd400-0xd4ff] [ 0.174499] pci 0000:02:01.0: bridge window [io 0xd000-0xd0ff] [ 0.174505] pci 0000:02:01.0: bridge window [mem 0x44000000-0x47ffffff pref] [ 0.174511] pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff] [ 0.174516] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.174521] pci 0000:00:1e.0: bridge window [io 0xd000-0xefff] [ 0.174528] pci 0000:00:1e.0: bridge window [mem 0xf6000000-0xfbffffff] [ 0.174534] pci 0000:00:1e.0: bridge window [mem 0x44000000-0x47ffffff pref] [ 0.174559] pci 0000:00:1e.0: setting latency timer to 64 [ 0.174569] pci 0000:02:01.0: enabling device (0000 -> 0003) [ 0.174802] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.174807] PCI: setting IRQ 11 as level-triggered [ 0.174814] pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.174824] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.174828] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.174832] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.174836] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff] [ 0.174840] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.174844] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 0.174848] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xfbffffff] [ 0.174852] pci_bus 0000:02: resource 2 [mem 0x44000000-0x47ffffff pref] [ 0.174856] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.174860] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff] [ 0.174864] pci_bus 0000:03: resource 0 [io 0xd400-0xd4ff] [ 0.174867] pci_bus 0000:03: resource 1 [io 0xd000-0xd0ff] [ 0.174871] pci_bus 0000:03: resource 2 [mem 0x44000000-0x47ffffff pref] [ 0.174875] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff] [ 0.174963] NET: Registered protocol family 2 [ 0.175068] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.175552] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.177144] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.178074] TCP: Hash tables configured (established 131072 bind 65536) [ 0.178080] TCP reno registered [ 0.178093] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.178128] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.178374] NET: Registered protocol family 1 [ 0.178659] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.178668] pci 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.178691] pci 0000:00:1d.0: PCI INT A disabled [ 0.178705] pci 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.178725] pci 0000:00:1d.1: PCI INT B disabled [ 0.178872] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.178877] pci 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.178897] pci 0000:00:1d.2: PCI INT C disabled [ 0.179043] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.179048] pci 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.179101] pci 0000:00:1d.7: PCI INT D disabled [ 0.179135] pci 0000:01:00.0: Boot video device [ 0.179150] PCI: CLS 32 bytes, default 64 [ 0.179275] Unpacking initramfs... [ 0.617543] Freeing initrd memory: 9836k freed [ 0.637661] audit: initializing netlink socket (disabled) [ 0.637686] type=2000 audit(1347218857.634:1): initialized [ 0.660711] highmem bounce pool size: 64 pages [ 0.660722] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.669572] VFS: Disk quotas dquot_6.5.2 [ 0.669621] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.669737] msgmni has been set to 1751 [ 0.669981] alg: No test for stdrng (krng) [ 0.670031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.670037] io scheduler noop registered [ 0.670040] io scheduler deadline registered [ 0.670054] io scheduler cfq registered (default) [ 0.670228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.670272] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.670276] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.670553] acpiphp: Slot [1] registered [ 0.670586] acpiphp: Slot [2] registered [ 0.670824] ERST: Table is not found! [ 0.670828] GHES: HEST is not enabled! [ 0.670850] isapnp: Scanning for PnP cards... [ 1.023778] isapnp: No Plug & Play device found [ 1.023905] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.044285] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.065092] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.065439] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 1.065445] PCI: setting IRQ 5 as level-triggered [ 1.065453] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 1.065487] serial 0000:00:1f.6: PCI INT B disabled [ 1.065658] Linux agpgart interface v0.103 [ 1.065838] agpgart-intel 0000:00:00.0: Intel i845 Chipset [ 1.069731] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000 [ 1.069982] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.074314] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.074325] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.074536] mousedev: PS/2 mouse device common for all mice [ 1.074742] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.074765] rtc0: alarms up to one day, 114 bytes nvram [ 1.074783] cpuidle: using governor ladder [ 1.074787] cpuidle: using governor menu [ 1.075148] TCP cubic registered [ 1.075200] NET: Registered protocol family 10 [ 1.075944] Mobile IPv6 [ 1.075949] NET: Registered protocol family 17 [ 1.075956] Registering the dns_resolver key type [ 1.076045] Using IPI No-Shortcut mode [ 1.076247] PM: Hibernation image not present or could not be loaded. [ 1.076267] registered taskstats version 1 [ 1.081053] rtc_cmos 00:06: setting system clock to 2012-09-09 19:27:38 UTC (1347218858) [ 1.081126] Initializing network drop monitor service [ 1.081292] Freeing unused kernel memory: 412k freed [ 1.082000] Write protecting the kernel text: 2840k [ 1.082046] Write protecting the kernel read-only data: 1088k [ 1.082947] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.112457] udevd[44]: starting version 175 [ 1.234894] usbcore: registered new interface driver usbfs [ 1.234943] usbcore: registered new interface driver hub [ 1.289704] usbcore: registered new device driver usb [ 1.290646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.290701] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 1.290736] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.290741] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.290785] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.290836] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.294739] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.298407] SCSI subsystem initialized [ 1.323731] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.323737] ACPI: Thermal Zone [THM] (64 C) [ 1.325662] uhci_hcd: USB Universal Host Controller Interface driver [ 1.342950] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 [ 1.394230] libata version 3.00 loaded. [ 1.403086] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.412114] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.412191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.412196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412200] usb usb1: Product: EHCI Host Controller [ 1.412203] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd [ 1.412207] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.412420] hub 1-0:1.0: USB hub found [ 1.412428] hub 1-0:1.0: 6 ports detected [ 1.412582] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.412603] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.412608] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.412624] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.412658] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 [ 1.412716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.412720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412724] usb usb2: Product: UHCI Host Controller [ 1.412726] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd [ 1.412729] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.412898] hub 2-0:1.0: USB hub found [ 1.412906] hub 2-0:1.0: 2 ports detected [ 1.413020] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.413033] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.413038] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.413051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.413078] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 [ 1.413128] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.413132] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.413135] usb usb3: Product: UHCI Host Controller [ 1.413138] usb usb3: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd [ 1.413141] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.413312] hub 3-0:1.0: USB hub found [ 1.413321] hub 3-0:1.0: 2 ports detected [ 1.413421] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.413434] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.413439] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.413453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.413482] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 [ 1.413533] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.413538] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.413541] usb usb4: Product: UHCI Host Controller [ 1.413544] usb usb4: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd [ 1.413547] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.413715] hub 4-0:1.0: USB hub found [ 1.413722] hub 4-0:1.0: 2 ports detected [ 1.414445] ata_piix 0000:00:1f.1: version 2.13 [ 1.414467] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.414478] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.414564] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.423934] scsi0 : ata_piix [ 1.428450] scsi1 : ata_piix [ 1.429627] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 1.429632] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 1.436125] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243) [ 1.436136] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) [ 1.436144] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243) [ 1.476200] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 [ 1.476246] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 [ 1.476306] firewire_ohci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.497087] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:0b:db:9a:84:34 [ 1.532101] firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 1.596466] ata1.00: ATA-5: HITACHI_DK23FB-60, 00M0A0C1, max UDMA/100 [ 1.596472] ata1.00: 117210240 sectors, multi 8: LBA [ 1.600442] ata2.00: ATAPI: Samsung CD-RW/DVD-ROM SN-324B, U102, max UDMA/33 [ 1.604331] ata1.00: configured for UDMA/100 [ 1.604535] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FB-6 00M0 PQ: 0 ANSI: 5 [ 1.616331] ata2.00: configured for UDMA/33 [ 1.620549] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SN-324B U102 PQ: 0 ANSI: 5 [ 1.645639] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.645728] sd 0:0:0:0: [sda] Write Protect is off [ 1.645734] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.645772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.650205] sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray [ 1.650212] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.650940] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.652065] Refined TSC clocksource calibration: 2392.937 MHz. [ 1.652075] Switching to clocksource tsc [ 1.697131] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.698090] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.709301] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.709477] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.908061] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 2.032183] firewire_core: created device fw0: GUID 474fc00023636410, S400 [ 2.084054] usb 3-1: New USB device found, idVendor=046d, idProduct=c016 [ 2.084061] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.084065] usb 3-1: Product: Optical USB Mouse [ 2.084068] usb 3-1: Manufacturer: Logitech [ 2.108569] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1 [ 2.108834] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0 [ 2.109179] usbcore: registered new interface driver usbhid [ 2.109184] usbhid: USB HID core driver [ 2.197517] PM: Starting manual resume from disk [ 2.197526] PM: Hibernation image partition 8:2 present [ 2.197528] PM: Looking for hibernation image. [ 2.197870] PM: Image not found (code -22) [ 2.197874] PM: Hibernation image not present or could not be loaded. [ 2.259576] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 4.431963] udevd[308]: starting version 175 [ 5.344437] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.360388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 5.360824] ACPI: Lid Switch [LID] [ 5.360928] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 5.360935] ACPI: Power Button [PBTN] [ 5.361028] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 5.361034] ACPI: Sleep Button [SBTN] [ 5.363585] ACPI: Requesting acpi_cpufreq [ 5.370143] ACPI: AC Adapter [AC] (on-line) [ 5.372867] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input5 [ 5.372882] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 5.376804] Marking TSC unstable due to TSC halts in idle [ 5.376831] ACPI: acpi_idle registered with cpuidle [ 5.379479] ACPI: Battery Slot [BAT0] (battery absent) [ 5.379524] ACPI: Battery Slot [BAT1] (battery absent) [ 5.383391] Switching to clocksource acpi_pm [ 5.570188] parport_pc 00:0c: reported by Plug and Play ACPI [ 5.570245] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 5.724249] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.758139] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:013e] [ 5.758161] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI [ 5.758165] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI [ 5.758172] yenta_cardbus 0000:02:01.0: TI: mfunc 0x012c1202, devctl 0x64 [ 5.852582] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 5.988638] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0458, PCI irq 11 [ 5.988650] yenta_cardbus 0000:02:01.0: Socket status: 30000086 [ 5.988661] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 5.988685] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0xd000-0xefff] [ 5.988696] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff: excluding 0xd000-0xd0ff 0xd400-0xd4ff [ 5.998168] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xf6000000-0xfbffffff] [ 5.998179] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf7e00000-0xf83fffff 0xfae00000-0xfb3fffff [ 5.998224] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0x44000000-0x47ffffff pref] [ 5.998234] pcmcia_socket pcmcia_socket0: cs: memory probe 0x44000000-0x47ffffff: excluding 0x44000000-0x47ffffff [ 6.031106] intel_rng: FWH not detected [ 6.047143] iTCO_vendor_support: vendor-support=0 [ 6.074817] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 6.075020] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860) [ 6.077656] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.368617] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f [ 6.370131] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 6.370774] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed. [ 6.370882] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 6.371492] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xf0000-0xfffff [ 6.371583] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 6.371668] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 6.371753] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 6.664177] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 6.664253] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 7.092654] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 7.120980] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 7.492156] intel8x0_measure_ac97_clock: measured 55120 usecs (2656 samples) [ 7.492167] intel8x0: clocking to 48000 [ 7.494898] snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 7.494940] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64 [ 8.853334] Adding 4882428k swap on /dev/sda2. Priority:-1 extents:1 across:4882428k [ 8.905111] EXT4-fs (sda3): re-mounted. Opts: (null) [ 9.386818] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.728187] loop: module loaded [ 11.547513] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.584519] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 13.521077] RPC: Registered named UNIX socket transport module. [ 13.521087] RPC: Registered udp transport module. [ 13.521093] RPC: Registered tcp transport module. [ 13.521099] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.608192] FS-Cache: Loaded [ 13.682121] FS-Cache: Netfs 'nfs' registered for caching [ 13.709318] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.313605] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9 [ 19.438179] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.361242] [drm] Initialized drm 1.1.0 20060810 [ 21.460611] wmi: Mapper loaded [ 21.545292] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 21.553965] [drm] nouveau 0000:01:00.0: Detected an NV20 generation card (0x028600a2) [ 21.554459] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 21.610328] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 21.610765] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 21.610771] [drm] nouveau 0000:01:00.0: BMP version 5.37 [ 21.610779] [drm] nouveau 0000:01:00.0: Bios version 04.28.20.29 [ 21.610788] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 21.610798] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100 000088b8 [ 21.610806] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02110223 00000064 [ 21.610812] [drm] nouveau 0000:01:00.0: Unknown LVDS configuration bits, please report [ 21.610823] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01120312 00000040 [ 21.610830] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 01130321 00000001 [ 21.611178] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCB14 [ 21.611228] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCE72 [ 21.613332] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCBFC [ 21.613393] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD3FC [ 21.613405] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD419 [ 21.613416] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCD53 [ 21.637146] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCE0D [ 21.637163] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1401x1050 (108000kHz pixel clock) [ 21.658672] [drm] nouveau 0000:01:00.0: 0 available performance level(s) [ 21.658697] [drm] nouveau 0000:01:00.0: c: core 195MHz memory 405MHz [ 21.659060] [TTM] Zone kernel: Available graphics memory: 448518 kiB. [ 21.659067] [TTM] Zone highmem: Available graphics memory: 516966 kiB. [ 21.659073] [TTM] Initializing pool allocator. [ 21.659105] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM [ 21.659462] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 21.659501] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 21.659567] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 21.659601] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 21.659827] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 21.796437] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006 [ 21.819189] i2c-core: driver [ch7006] using legacy suspend method [ 21.819199] i2c-core: driver [ch7006] using legacy resume method [ 21.824291] ch7006 0-0075: Detected version ID: ae [ 21.996699] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.996711] [drm] No driver support for vblank timestamp query. [ 21.996731] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 21.996742] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 21.996752] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [ 21.996762] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 21.996770] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 22.562414] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 22.562425] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 22.754884] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x49000, bo f7118c00 [ 22.755888] fbcon: nouveaufb (fb0) is primary device [ 22.757258] Console: switching to colour frame buffer device 240x75 [ 22.757277] fb0: nouveaufb frame buffer device [ 22.757280] drm: registered panic notifier [ 22.757299] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 22.816194] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex [ 22.816200] b44 ssb0:0: eth0: Flow control is off for TX and off for RX [ 22.816459] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.670092] Bluetooth: Core ver 2.16 [ 23.670161] NET: Registered protocol family 31 [ 23.670168] Bluetooth: HCI device and connection manager initialized [ 23.670177] Bluetooth: HCI socket layer initialized [ 23.670183] Bluetooth: L2CAP socket layer initialized [ 23.670829] Bluetooth: SCO socket layer initialized [ 23.879219] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 23.890583] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 23.890594] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 24.456209] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 24.456219] [drm] nouveau 0000:01:00.0: 0xDFE7: Parsing digital output script table [ 24.472116] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 24.472123] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 24.472131] [drm] nouveau 0000:01:00.0: 0xDF32: Parsing digital output script table [ 24.678554] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [ 24.686198] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 24.726490] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.726501] Bluetooth: BNEP filters: protocol multicast [ 26.292657] lp0: using parport0 (interrupt-driven). [ 26.844636] ppdev: user-space parallel port driver [ 33.088058] eth0: no IPv6 routers present [ 60.432078] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 60.432088] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 60.432098] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 60.997769] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 61.019036] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 61.019044] [drm] nouveau 0000:01:00.0: 0xDFE7: Parsing digital output script table [ 61.034949] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 61.034957] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 61.034964] [drm] nouveau 0000:01:00.0: 0xDF32: Parsing digital output script table [ 61.241362] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [ 61.242657] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 61.246918] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
Attachment:
Xorg.nouveau_in_blacklist.log
Description: Binary data