Package: xserver-xorg-video-nouveau Version: 1:1.0.1-3 Severity: important Dear Maintainer, in a newly installed wheezy (no non-free nvidia drivers around) nouveau gives distorted graphics with a Geforce 4200Go (Dell inspiron 8500), see png attached. The mouse pointer is distorted and the desktop difficultly usable, so that, in absence of suggestions, I will switch to vesa drivers. Thanks The attached Xorg.log corresponds to the config file #cat /etc/X11/xorg.conf.d/98-me Section "Device" Identifier "Device0" Driver "nouveau" EndSection and to # lsmod Module Size Used by ppdev 12651 0 lp 12797 0 rfcomm 28590 0 bnep 17288 2 bluetooth 103750 8 bnep,rfcomm rfkill 18516 2 bluetooth binfmt_misc 12813 1 uinput 12991 1 nfsd 173714 2 nfs 265779 0 nfs_acl 12463 2 nfs,nfsd auth_rpcgss 32143 2 nfs,nfsd fscache 31978 1 nfs lockd 57255 2 nfs,nfsd sunrpc 143853 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd loop 17810 0 firewire_sbp2 17664 0 joydev 17010 0 snd_intel8x0m 17503 0 snd_intel8x0 22372 2 snd_ac97_codec 84201 2 snd_intel8x0,snd_intel8x0m snd_pcm 53390 3 snd_ac97_codec,snd_intel8x0,snd_intel8x0m snd_page_alloc 12867 3 snd_pcm,snd_intel8x0,snd_intel8x0m snd_seq 39487 0 ch7006 21549 1 snd_seq_device 13016 1 snd_seq snd_timer 22356 2 snd_seq,snd_pcm snd 42691 11 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_ac97_codec,snd_intel8x0,snd_intel8x0m nouveau 493727 2 soundcore 12921 1 snd mxm_wmi 12433 1 nouveau wmi 13051 1 mxm_wmi ttm 42997 1 nouveau drm_kms_helper 22699 2 nouveau,ch7006 drm 134178 5 drm_kms_helper,ttm,nouveau,ch7006 i2c_algo_bit 12713 1 nouveau i2c_core 19116 5 i2c_algo_bit,drm,drm_kms_helper,nouveau,ch7006 psmouse 54927 0 iTCO_wdt 16945 0 iTCO_vendor_support 12632 1 iTCO_wdt ac97_bus 12462 1 snd_ac97_codec yenta_socket 22402 0 rng_core 12580 0 pcmcia_rsrc 17380 1 yenta_socket dcdbas 13080 0 serio_raw 12803 0 pcspkr 12515 0 evdev 17225 15 acpi_cpufreq 12807 0 video 17412 1 nouveau mperf 12421 1 acpi_cpufreq parport_pc 22036 1 parport 31254 3 parport_pc,lp,ppdev ac 12552 0 battery 12957 0 processor 27565 2 acpi_cpufreq button 12817 1 nouveau shpchp 26717 0 power_supply 13283 2 battery,ac ext4 302665 3 crc16 12327 2 ext4,bluetooth jbd2 52246 1 ext4 mbcache 12897 1 ext4 usbhid 31523 0 hid 60120 1 usbhid sg 21476 0 sr_mod 17468 0 sd_mod 35425 5 crc_t10dif 12332 1 sd_mod cdrom 34813 1 sr_mod ata_generic 12439 0 b44 22955 0 ssb 43266 1 b44 firewire_ohci 26784 0 mmc_core 61993 1 ssb mii 12595 1 b44 ata_piix 21175 4 libata 124981 2 ata_piix,ata_generic firewire_core 38719 2 firewire_ohci,firewire_sbp2 crc_itu_t 12331 1 firewire_core pcmcia 32012 1 ssb pcmcia_core 17942 3 pcmcia,pcmcia_rsrc,yenta_socket thermal 13103 0 thermal_sys 17752 3 thermal,processor,video scsi_mod 135124 5 libata,sd_mod,sr_mod,sg,firewire_sbp2 uhci_hcd 22337 0 ehci_hcd 35509 0 usbcore 104352 4 ehci_hcd,uhci_hcd,usbhid usb_common 12338 1 usbcore # PS I tried also /etc/modprobe.d/nouveau.conf options nouveau noaccel=1 # even worse /etc/modprobe.d/nouveau.conf options nouveau nofbaccel=1 # even worse -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Sep 2 19:21 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2027892 Jul 18 11:35 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV28 [GeForce4 Ti 4200 Go AGP 8x] [10de:0286] (rev a1) /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 4 -rw-r--r-- 1 root root 67 Sep 3 20:39 98-me KMS configuration files: ------------------------ /etc/modprobe.d/i915-kms.conf: options i915 modeset=1 /etc/modprobe.d/radeon-kms.conf: options radeon modeset=1 Kernel version (/proc/version): ------------------------------- Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012 Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 33944 Sep 3 20:51 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 519.844] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 519.844] X Protocol Version 11, Revision 0 [ 519.844] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian [ 519.845] Current Operating System: Linux majorana 3.2.0-3-686-pae #1 SMP Mon Jul 23 03:50:34 UTC 2012 i686 [ 519.845] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=UUID=75240409-3b94-48af-89c6-86e6f9c5e2ff ro single [ 519.845] Build Date: 18 July 2012 09:27:53AM [ 519.845] xorg-server 2:1.12.3-1 (Julien Cristau <jcristau@debian.org>) [ 519.845] Current version of pixman: 0.26.0 [ 519.845] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 519.845] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 519.845] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 3 20:50:53 2012 [ 519.878] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 519.974] (==) No Layout section. Using the first Screen section. [ 519.974] (==) No screen section available. Using defaults. [ 519.974] (**) |-->Screen "Default Screen Section" (0) [ 519.974] (**) | |-->Monitor "<default monitor>" [ 519.975] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 519.975] (==) Automatically adding devices [ 519.975] (==) Automatically enabling devices [ 519.975] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 519.975] Entry deleted from font path. [ 519.975] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 519.975] Entry deleted from font path. [ 519.975] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 519.975] (==) ModulePath set to "/usr/lib/xorg/modules" [ 519.975] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 519.975] (II) Loader magic: 0xb77605a0 [ 519.975] (II) Module ABI versions: [ 519.975] X.Org ANSI C Emulation: 0.4 [ 519.975] X.Org Video Driver: 12.0 [ 519.975] X.Org XInput driver : 16.0 [ 519.975] X.Org Server Extension : 6.0 [ 519.976] (--) PCI:*(0:1:0:0) 10de:0286:1028:0179 rev 161, Mem @ 0xfc000000/16777216, 0xf0000000/67108864, BIOS @ 0x????????/131072 [ 519.976] (II) Open ACPI successful (/var/run/acpid.socket) [ 519.976] (II) LoadModule: "extmod" [ 519.977] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 520.001] (II) Module extmod: vendor="X.Org Foundation" [ 520.001] compiled for 1.12.3, module version = 1.0.0 [ 520.002] Module class: X.Org Server Extension [ 520.002] ABI class: X.Org Server Extension, version 6.0 [ 520.002] (II) Loading extension SELinux [ 520.002] (II) Loading extension MIT-SCREEN-SAVER [ 520.002] (II) Loading extension XFree86-VidModeExtension [ 520.002] (II) Loading extension XFree86-DGA [ 520.002] (II) Loading extension DPMS [ 520.002] (II) Loading extension XVideo [ 520.002] (II) Loading extension XVideo-MotionCompensation [ 520.002] (II) Loading extension X-Resource [ 520.002] (II) LoadModule: "dbe" [ 520.002] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 520.034] (II) Module dbe: vendor="X.Org Foundation" [ 520.034] compiled for 1.12.3, module version = 1.0.0 [ 520.034] Module class: X.Org Server Extension [ 520.034] ABI class: X.Org Server Extension, version 6.0 [ 520.034] (II) Loading extension DOUBLE-BUFFER [ 520.034] (II) LoadModule: "glx" [ 520.034] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 520.035] (II) Module glx: vendor="X.Org Foundation" [ 520.035] compiled for 1.12.3, module version = 1.0.0 [ 520.035] ABI class: X.Org Server Extension, version 6.0 [ 520.035] (==) AIGLX enabled [ 520.035] (II) Loading extension GLX [ 520.035] (II) LoadModule: "record" [ 520.035] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 520.036] (II) Module record: vendor="X.Org Foundation" [ 520.036] compiled for 1.12.3, module version = 1.13.0 [ 520.036] Module class: X.Org Server Extension [ 520.036] ABI class: X.Org Server Extension, version 6.0 [ 520.036] (II) Loading extension RECORD [ 520.036] (II) LoadModule: "dri" [ 520.036] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 520.037] (II) Module dri: vendor="X.Org Foundation" [ 520.037] compiled for 1.12.3, module version = 1.0.0 [ 520.037] ABI class: X.Org Server Extension, version 6.0 [ 520.037] (II) Loading extension XFree86-DRI [ 520.037] (II) LoadModule: "dri2" [ 520.038] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 520.038] (II) Module dri2: vendor="X.Org Foundation" [ 520.038] compiled for 1.12.3, module version = 1.2.0 [ 520.038] ABI class: X.Org Server Extension, version 6.0 [ 520.038] (II) Loading extension DRI2 [ 520.038] (==) Matched nouveau as autoconfigured driver 0 [ 520.038] (==) Matched nv as autoconfigured driver 1 [ 520.038] (==) Matched vesa as autoconfigured driver 2 [ 520.038] (==) Matched fbdev as autoconfigured driver 3 [ 520.039] (==) Assigned the driver to the xf86ConfigLayout [ 520.039] (II) LoadModule: "nouveau" [ 520.039] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 520.047] (II) Module nouveau: vendor="X.Org Foundation" [ 520.048] compiled for 1.12.3, module version = 1.0.1 [ 520.048] Module class: X.Org Video Driver [ 520.048] ABI class: X.Org Video Driver, version 12.0 [ 520.048] (II) LoadModule: "nv" [ 520.050] (WW) Warning, couldn't open module nv [ 520.050] (II) UnloadModule: "nv" [ 520.050] (II) Unloading nv [ 520.050] (EE) Failed to load module "nv" (module does not exist, 0) [ 520.050] (II) LoadModule: "vesa" [ 520.050] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 520.060] (II) Module vesa: vendor="X.Org Foundation" [ 520.060] compiled for 1.12.1, module version = 2.3.1 [ 520.060] Module class: X.Org Video Driver [ 520.060] ABI class: X.Org Video Driver, version 12.0 [ 520.060] (II) LoadModule: "fbdev" [ 520.060] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 520.076] (II) Module fbdev: vendor="X.Org Foundation" [ 520.076] compiled for 1.12.1, module version = 0.4.2 [ 520.077] ABI class: X.Org Video Driver, version 12.0 [ 520.077] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000 [ 520.077] (II) NOUVEAU driver for NVIDIA chipset families : [ 520.077] RIVA TNT (NV04) [ 520.077] RIVA TNT2 (NV05) [ 520.077] GeForce 256 (NV10) [ 520.077] GeForce 2 (NV11, NV15) [ 520.077] GeForce 4MX (NV17, NV18) [ 520.077] GeForce 3 (NV20) [ 520.077] GeForce 4Ti (NV25, NV28) [ 520.077] GeForce FX (NV3x) [ 520.077] GeForce 6 (NV4x) [ 520.077] GeForce 7 (G7x) [ 520.078] GeForce 8 (G8x) [ 520.078] GeForce GTX 200 (NVA0) [ 520.078] GeForce GTX 400 (NVC0) [ 520.078] (II) VESA: driver for VESA chipsets: vesa [ 520.078] (II) FBDEV: driver for framebuffer: fbdev [ 520.078] (++) using VT number 7 [ 520.078] drmOpenDevice: node name is /dev/dri/card0 [ 520.078] drmOpenDevice: open result is 8, (OK) [ 520.079] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 520.079] drmOpenDevice: node name is /dev/dri/card0 [ 520.079] drmOpenDevice: open result is 8, (OK) [ 520.079] drmOpenByBusid: drmOpenMinor returns 8 [ 520.079] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 520.079] (II) [drm] nouveau interface version: 1.0.0 [ 520.079] (WW) Falling back to old probe method for vesa [ 520.079] (WW) Falling back to old probe method for fbdev [ 520.079] (II) Loading sub module "fbdevhw" [ 520.079] (II) LoadModule: "fbdevhw" [ 520.080] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 520.086] (II) Module fbdevhw: vendor="X.Org Foundation" [ 520.086] compiled for 1.12.3, module version = 0.0.2 [ 520.086] ABI class: X.Org Video Driver, version 12.0 [ 520.087] (II) Loading sub module "dri" [ 520.087] (II) LoadModule: "dri" [ 520.087] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 520.087] (II) Module dri: vendor="X.Org Foundation" [ 520.087] compiled for 1.12.3, module version = 1.0.0 [ 520.087] ABI class: X.Org Server Extension, version 6.0 [ 520.087] (II) NOUVEAU(0): Loaded DRI module [ 520.088] drmOpenDevice: node name is /dev/dri/card0 [ 520.088] drmOpenDevice: open result is 9, (OK) [ 520.088] drmOpenDevice: node name is /dev/dri/card0 [ 520.088] drmOpenDevice: open result is 9, (OK) [ 520.088] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 520.088] drmOpenDevice: node name is /dev/dri/card0 [ 520.088] drmOpenDevice: open result is 9, (OK) [ 520.088] drmOpenByBusid: drmOpenMinor returns 9 [ 520.088] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 520.088] (II) [drm] DRM interface version 1.4 [ 520.088] (II) [drm] DRM open master succeeded. [ 520.088] (--) NOUVEAU(0): Chipset: "NVIDIA NV28" [ 520.088] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 520.088] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 520.089] (==) NOUVEAU(0): RGB weight 888 [ 520.089] (==) NOUVEAU(0): Default visual is TrueColor [ 520.089] (==) NOUVEAU(0): Using HW cursor [ 520.089] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 520.089] (==) NOUVEAU(0): Page flipping enabled [ 520.089] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2] [ 520.184] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 520.465] (II) NOUVEAU(0): Output LVDS-1 has no monitor section [ 520.474] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section [ 520.536] (II) NOUVEAU(0): EDID for output VGA-1 [ 520.650] (II) NOUVEAU(0): EDID for output LVDS-1 [ 520.650] (II) NOUVEAU(0): Manufacturer: SHP Model: 139f Serial#: 0 [ 520.650] (II) NOUVEAU(0): Year: 2003 Week: 32 [ 520.650] (II) NOUVEAU(0): EDID Version: 1.3 [ 520.650] (II) NOUVEAU(0): Digital Display Input [ 520.650] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 520.650] (II) NOUVEAU(0): Gamma: 2.20 [ 520.650] (II) NOUVEAU(0): No DPMS capabilities specified [ 520.650] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 520.650] (II) NOUVEAU(0): First detailed timing is preferred mode [ 520.650] (II) NOUVEAU(0): redX: 0.596 redY: 0.334 greenX: 0.303 greenY: 0.559 [ 520.650] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.123 whiteX: 0.312 whiteY: 0.328 [ 520.650] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 520.650] (II) NOUVEAU(0): Supported detailed timing: [ 520.651] (II) NOUVEAU(0): clock: 161.8 MHz Image Size: 331 x 207 mm [ 520.651] (II) NOUVEAU(0): h_active: 1920 h_sync: 2020 h_sync_end 2052 h_blank_end 2184 h_border: 0 [ 520.651] (II) NOUVEAU(0): v_active: 1200 v_sync: 1202 v_sync_end 1208 v_blanking: 1235 v_border: 0 [ 520.651] (II) NOUVEAU(0): Unknown vendor-specific block f [ 520.651] (II) NOUVEAU(0): U0674�M1LW02 [ 520.651] (II) NOUVEAU(0): �����hH [ 520.651] (II) NOUVEAU(0): EDID (in hex): [ 520.651] (II) NOUVEAU(0): 00ffffffffffff004d109f1300000000 [ 520.651] (II) NOUVEAU(0): 200d0103802115780aa8a098554d8f26 [ 520.651] (II) NOUVEAU(0): 1f505400000001010101010101010101 [ 520.651] (II) NOUVEAU(0): 0101010101012f3f800871b023406420 [ 520.651] (II) NOUVEAU(0): 26004bcf100000190000000f00000000 [ 520.651] (II) NOUVEAU(0): 00000000002892025000000000fe0055 [ 520.651] (II) NOUVEAU(0): 30363734029a4d314c573032000000fe [ 520.651] (II) NOUVEAU(0): 00c0b0a0908068480002010a202000a4 [ 520.651] (II) NOUVEAU(0): Printing probed modes for output LVDS-1 [ 520.651] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 161.75 1920 2020 2052 2184 1200 1202 1208 1235 -hsync -vsync (74.1 kHz eP) [ 520.651] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 520.651] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e) [ 520.651] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e) [ 520.651] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e) [ 520.652] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e) [ 520.660] (II) NOUVEAU(0): EDID for output DVI-D-1 [ 520.660] (II) NOUVEAU(0): Output VGA-1 disconnected [ 520.660] (II) NOUVEAU(0): Output LVDS-1 connected [ 520.660] (II) NOUVEAU(0): Output DVI-D-1 disconnected [ 520.660] (II) NOUVEAU(0): Using exact sizes for initial modes [ 520.660] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1920x1200 [ 520.660] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 520.661] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0) [ 520.661] (**) NOUVEAU(0): Driver mode "1920x1200": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 161.75 1920 2020 2052 2184 1200 1202 1208 1235 -hsync -vsync (74.1 kHz eP) [ 520.661] (**) NOUVEAU(0): Driver mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 59.9 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1600x1200": 161.0 MHz (scaled from 0.0 MHz), 74.5 kHz, 59.9 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz), 59.7 kHz, 59.9 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e) [ 520.661] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz [ 520.661] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e) [ 520.662] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz [ 520.662] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e) [ 520.662] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz [ 520.662] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e) [ 520.662] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz [ 520.662] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e) [ 520.662] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 520.662] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e) [ 520.662] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz [ 520.662] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e) [ 520.662] (==) NOUVEAU(0): DPI set to (96, 96) [ 520.662] (II) Loading sub module "fb" [ 520.662] (II) LoadModule: "fb" [ 520.663] (II) Loading /usr/lib/xorg/modules/libfb.so [ 520.684] (II) Module fb: vendor="X.Org Foundation" [ 520.684] compiled for 1.12.3, module version = 1.0.0 [ 520.684] ABI class: X.Org ANSI C Emulation, version 0.4 [ 520.684] (II) Loading sub module "exa" [ 520.684] (II) LoadModule: "exa" [ 520.685] (II) Loading /usr/lib/xorg/modules/libexa.so [ 520.688] (II) Module exa: vendor="X.Org Foundation" [ 520.688] compiled for 1.12.3, module version = 2.5.0 [ 520.688] ABI class: X.Org Video Driver, version 12.0 [ 520.688] (II) Loading sub module "shadowfb" [ 520.688] (II) LoadModule: "shadowfb" [ 520.689] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 520.690] (II) Module shadowfb: vendor="X.Org Foundation" [ 520.690] compiled for 1.12.3, module version = 1.0.0 [ 520.690] ABI class: X.Org ANSI C Emulation, version 0.4 [ 520.690] (II) UnloadModule: "vesa" [ 520.690] (II) Unloading vesa [ 520.690] (II) UnloadModule: "fbdev" [ 520.690] (II) Unloading fbdev [ 520.690] (II) UnloadSubModule: "fbdevhw" [ 520.690] (II) Unloading fbdevhw [ 520.690] (--) Depth 24 pixmap format is 32 bpp [ 520.691] (II) NOUVEAU(0): Opened GPU channel 1 [ 520.692] (II) NOUVEAU(0): [DRI2] Setup complete [ 520.692] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau_vieux [ 520.692] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau_vieux [ 520.692] (II) EXA(0): Driver allocated offscreen pixmaps [ 520.692] (II) EXA(0): Driver registered support for the following operations: [ 520.692] (II) Solid [ 520.693] (II) Copy [ 520.693] (II) Composite (RENDER acceleration) [ 520.693] (II) UploadToScreen [ 520.693] (II) DownloadFromScreen [ 520.693] (==) NOUVEAU(0): Backing store disabled [ 520.693] (==) NOUVEAU(0): Silken mouse enabled [ 520.693] (==) NOUVEAU(0): DPMS enabled [ 520.693] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 520.694] (--) RandR disabled [ 520.694] (II) Initializing built-in extension Generic Event Extension [ 520.694] (II) Initializing built-in extension SHAPE [ 520.694] (II) Initializing built-in extension MIT-SHM [ 520.694] (II) Initializing built-in extension XInputExtension [ 520.694] (II) Initializing built-in extension XTEST [ 520.694] (II) Initializing built-in extension BIG-REQUESTS [ 520.694] (II) Initializing built-in extension SYNC [ 520.694] (II) Initializing built-in extension XKEYBOARD [ 520.694] (II) Initializing built-in extension XC-MISC [ 520.694] (II) Initializing built-in extension SECURITY [ 520.694] (II) Initializing built-in extension XINERAMA [ 520.694] (II) Initializing built-in extension XFIXES [ 520.695] (II) Initializing built-in extension RENDER [ 520.695] (II) Initializing built-in extension RANDR [ 520.695] (II) Initializing built-in extension COMPOSITE [ 520.695] (II) Initializing built-in extension DAMAGE [ 520.695] (II) SELinux: Disabled on system [ 520.735] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 520.735] (II) AIGLX: enabled GLX_INTEL_swap_event [ 520.735] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 520.735] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 520.736] (II) AIGLX: Loaded and initialized nouveau_vieux [ 520.736] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 520.791] (II) NOUVEAU(0): NVEnterVT is called. [ 521.032] (II) NOUVEAU(0): Setting screen physical size to 507 x 317 [ 521.032] resize called 1920 1200 [ 521.215] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 521.215] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 521.215] (II) LoadModule: "evdev" [ 521.216] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 521.232] (II) Module evdev: vendor="X.Org Foundation" [ 521.232] compiled for 1.12.1, module version = 2.7.0 [ 521.232] Module class: X.Org XInput Driver [ 521.232] ABI class: X.Org XInput driver, version 16.0 [ 521.232] (II) Using input driver 'evdev' for 'Video Bus' [ 521.232] (**) Video Bus: always reports core events [ 521.232] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 521.232] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 521.232] (--) evdev: Video Bus: Found keys [ 521.232] (II) evdev: Video Bus: Configuring as keyboard [ 521.233] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input5/event5" [ 521.233] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 521.233] (**) Option "xkb_rules" "evdev" [ 521.233] (**) Option "xkb_model" "pc105" [ 521.233] (**) Option "xkb_layout" "ie" [ 521.298] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 521.299] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 521.299] (II) Using input driver 'evdev' for 'Power Button' [ 521.299] (**) Power Button: always reports core events [ 521.299] (**) evdev: Power Button: Device: "/dev/input/event3" [ 521.299] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 521.299] (--) evdev: Power Button: Found keys [ 521.299] (II) evdev: Power Button: Configuring as keyboard [ 521.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3" [ 521.299] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 521.299] (**) Option "xkb_rules" "evdev" [ 521.299] (**) Option "xkb_model" "pc105" [ 521.299] (**) Option "xkb_layout" "ie" [ 521.301] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 521.301] (II) No input driver specified, ignoring this device. [ 521.301] (II) This device may have been added with another device file. [ 521.302] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [ 521.302] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 521.302] (II) Using input driver 'evdev' for 'Sleep Button' [ 521.302] (**) Sleep Button: always reports core events [ 521.302] (**) evdev: Sleep Button: Device: "/dev/input/event4" [ 521.303] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 521.303] (--) evdev: Sleep Button: Found keys [ 521.303] (II) evdev: Sleep Button: Configuring as keyboard [ 521.303] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4" [ 521.303] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 521.303] (**) Option "xkb_rules" "evdev" [ 521.303] (**) Option "xkb_model" "pc105" [ 521.303] (**) Option "xkb_layout" "ie" [ 521.305] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event1) [ 521.305] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall" [ 521.305] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse' [ 521.305] (**) Logitech Optical USB Mouse: always reports core events [ 521.305] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event1" [ 521.305] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016 [ 521.305] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons [ 521.305] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s) [ 521.305] (--) evdev: Logitech Optical USB Mouse: Found relative axes [ 521.305] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes [ 521.306] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse [ 521.306] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support [ 521.306] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5 [ 521.306] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 521.306] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1/event1" [ 521.306] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9) [ 521.306] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes. [ 521.307] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1 [ 521.307] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0 [ 521.307] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000 [ 521.307] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4 [ 521.308] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0) [ 521.308] (II) No input driver specified, ignoring this device. [ 521.308] (II) This device may have been added with another device file. [ 521.309] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 521.309] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 521.309] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 521.309] (**) AT Translated Set 2 keyboard: always reports core events [ 521.309] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 521.309] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 521.309] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 521.309] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 521.309] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 521.309] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 521.310] (**) Option "xkb_rules" "evdev" [ 521.310] (**) Option "xkb_model" "pc105" [ 521.310] (**) Option "xkb_layout" "ie" [ 521.311] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event7) [ 521.312] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall" [ 521.312] (II) Using input driver 'evdev' for 'DualPoint Stick' [ 521.312] (**) DualPoint Stick: always reports core events [ 521.312] (**) evdev: DualPoint Stick: Device: "/dev/input/event7" [ 521.312] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8 [ 521.312] (--) evdev: DualPoint Stick: Found 3 mouse buttons [ 521.312] (--) evdev: DualPoint Stick: Found relative axes [ 521.312] (--) evdev: DualPoint Stick: Found x and y relative axes [ 521.312] (II) evdev: DualPoint Stick: Configuring as mouse [ 521.312] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5 [ 521.312] (**) evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 521.312] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7" [ 521.312] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 11) [ 521.312] (II) evdev: DualPoint Stick: initialized for relative axes. [ 521.313] (**) DualPoint Stick: (accel) keeping acceleration scheme 1 [ 521.313] (**) DualPoint Stick: (accel) acceleration profile 0 [ 521.313] (**) DualPoint Stick: (accel) acceleration factor: 2.000 [ 521.313] (**) DualPoint Stick: (accel) acceleration threshold: 4 [ 521.314] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1) [ 521.314] (II) No input driver specified, ignoring this device. [ 521.314] (II) This device may have been added with another device file. [ 521.315] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event8) [ 521.315] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall" [ 521.315] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall" [ 521.315] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons" [ 521.315] (II) LoadModule: "synaptics" [ 521.316] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 521.344] (II) Module synaptics: vendor="X.Org Foundation" [ 521.345] compiled for 1.12.1.902, module version = 1.6.2 [ 521.345] Module class: X.Org XInput Driver [ 521.345] ABI class: X.Org XInput driver, version 16.0 [ 521.345] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad' [ 521.345] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events [ 521.345] (**) Option "Device" "/dev/input/event8" [ 521.345] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023 [ 521.345] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767 [ 521.345] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127 [ 521.345] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width. [ 521.345] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle [ 521.345] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8 [ 521.345] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15 [ 521.346] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found [ 521.346] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events [ 521.346] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8" [ 521.346] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 12) [ 521.346] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 521.346] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75 [ 521.346] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.156 [ 521.347] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1 [ 521.347] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1 [ 521.347] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000 [ 521.347] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4 [ 521.347] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found [ 521.348] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2) [ 521.348] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 521.349] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 521.349] (II) No input driver specified, ignoring this device. [ 521.349] (II) This device may have been added with another device file. [ 521.351] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event9) [ 521.351] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 521.351] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 521.351] (**) ACPI Virtual Keyboard Device: always reports core events [ 521.351] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event9" [ 521.351] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 521.351] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 521.351] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 521.351] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9" [ 521.351] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13) [ 521.351] (**) Option "xkb_rules" "evdev" [ 521.351] (**) Option "xkb_model" "pc105" [ 521.351] (**) Option "xkb_layout" "ie" [ 576.304] (II) NOUVEAU(0): EDID vendor "SHP", prod id 5023 [ 576.304] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 576.304] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 161.75 1920 2020 2052 2184 1200 1202 1208 1235 -hsync -vsync (74.1 kHz eP) udev information: ----------------- P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input5 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input5 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b 0 0 0 0 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5654514 P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input5/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input5/event5 E: DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5925814 E: XKBLAYOUT=ie E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5623610 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3 E: DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5923863 E: XKBLAYOUT=ie E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 E: EV=21 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: UDEV_LOG=3 E: USEC_INITIALIZED=5620759 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2 N: input/event2 E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5660952 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5622514 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4 E: DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5924853 E: XKBLAYOUT=ie E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1 E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1 E: EV=17 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Optical_USB_Mouse E: ID_MODEL_ENC=Optical\x20USB\x20Mouse E: ID_MODEL_ID=c016 E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0 E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0 E: ID_REVISION=0340 E: ID_SERIAL=Logitech_Optical_USB_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: KEY=70000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0003v046DpC016e0110-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw E: MSC=10 E: NAME="Logitech Optical USB Mouse" E: PHYS="usb-0000:00:1d.1-1/input0" E: PRODUCT=3/46d/c016/110 E: PROP=0 E: REL=103 E: SUBSYSTEM=input E: UDEV_LOG=3 E: UNIQ="" E: USEC_INITIALIZED=6451447 P: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1/event1 N: input/event1 S: input/by-id/usb-Logitech_Optical_USB_Mouse-event-mouse S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_Optical_USB_Mouse-event-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1/event1 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Optical_USB_Mouse E: ID_MODEL_ENC=Optical\x20USB\x20Mouse E: ID_MODEL_ID=c016 E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0 E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0 E: ID_REVISION=0340 E: ID_SERIAL=Logitech_Optical_USB_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=6465579 P: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1/mouse0 N: input/mouse0 S: input/by-id/usb-Logitech_Optical_USB_Mouse-mouse S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_Optical_USB_Mouse-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1/mouse0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Optical_USB_Mouse E: ID_MODEL_ENC=Optical\x20USB\x20Mouse E: ID_MODEL_ID=c016 E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0 E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0 E: ID_REVISION=0340 E: ID_SERIAL=Logitech_Optical_USB_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=6462612 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=1100f 2902002 8380307c f910f001 feffffdf ffefffff ffffffff fffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,C1,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5493799 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5922684 E: XKBLAYOUT=ie E: XKBMODEL=pc105 P: /devices/platform/i8042/serio1/input/input7 E: DEVPATH=/devices/platform/i8042/serio1/input/input7 E: EV=7 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=70000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0008e0000-e0,1,2,k110,111,112,r0,1,amlsfw E: NAME="DualPoint Stick" E: PHYS="isa0060/serio1/input1" E: PRODUCT=11/2/8/0 E: PROP=0 E: REL=3 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=7817438 P: /devices/platform/i8042/serio1/input/input7/event7 N: input/event7 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=7824778 P: /devices/platform/i8042/serio1/input/input7/mouse1 N: input/mouse1 S: input/by-path/platform-i8042-serio-1-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E: DEVNAME=/dev/input/mouse1 E: DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=33 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=7825731 P: /devices/platform/i8042/serio1/input/input8 E: ABS=1000003 E: DEVPATH=/devices/platform/i8042/serio1/input/input8 E: EV=b E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=420 0 70000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0008e6337-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw E: NAME="AlpsPS/2 ALPS DualPoint TouchPad" E: PHYS="isa0060/serio1/input0" E: PRODUCT=11/2/8/6337 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=7841995 P: /devices/platform/i8042/serio1/input/input8/event8 N: input/event8 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event8 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8787137 P: /devices/platform/i8042/serio1/input/input8/mouse2 N: input/mouse2 S: input/by-path/platform-i8042-serio-1-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E: DEVNAME=/dev/input/mouse2 E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse2 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=34 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8785687 P: /devices/platform/pcspkr/input/input6 E: DEVPATH=/devices/platform/pcspkr/input/input6 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5672928 P: /devices/platform/pcspkr/input/input6/event6 N: input/event6 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/platform/pcspkr/input/input6/event6 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5683159 P: /devices/virtual/input/input9 E: DEVPATH=/devices/virtual/input/input9 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw E: NAME="ACPI Virtual Keyboard Device" E: PRODUCT=3/0/0/4 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=38844724 P: /devices/virtual/input/input9/event9 N: input/event9 E: BACKSPACE=guess E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/virtual/input/input9/event9 E: DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=38874396 E: XKBLAYOUT=ie E: XKBMODEL=pc105 DRM Information from dmesg: --------------------------- [ 0.094873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 1.076067] Linux agpgart interface v0.103 [ 1.076300] agpgart-intel 0000:00:00.0: Intel i845 Chipset [ 1.080239] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000 [ 6.290870] [drm] Initialized drm 1.1.0 20060810 [ 6.522724] [drm] nouveau 0000:01:00.0: Detected an NV20 generation card (0x028600a2) [ 6.523275] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 6.579586] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 6.580397] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 6.580461] [drm] nouveau 0000:01:00.0: BMP version 5.37 [ 6.580525] [drm] nouveau 0000:01:00.0: Bios version 04.28.20.29 [ 6.580591] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 6.580676] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100 000088b8 [ 6.580743] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02110223 00000064 [ 6.580807] [drm] nouveau 0000:01:00.0: Unknown LVDS configuration bits, please report [ 6.580893] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01120312 00000040 [ 6.580960] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 01130321 00000001 [ 6.581536] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCB14 [ 6.581661] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCE72 [ 6.583834] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCBFC [ 6.583967] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD3FC [ 6.584088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD419 [ 6.584175] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCD53 [ 6.622012] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCE0D [ 6.622115] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1401x1050 (108000kHz pixel clock) [ 6.713529] [drm] nouveau 0000:01:00.0: 0 available performance level(s) [ 6.713621] [drm] nouveau 0000:01:00.0: c: core 195MHz memory 405MHz [ 6.718673] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM [ 6.719096] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 6.719196] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 6.719322] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 6.719407] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 6.719682] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 6.852976] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006 [ 7.215876] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.215947] [drm] No driver support for vblank timestamp query. [ 7.223593] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 7.223715] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 7.223836] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [ 7.223928] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 7.224051] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 7.789841] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 7.789964] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 7.974220] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x49000, bo f72a6600 [ 7.982435] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 7.982462] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 7.993750] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 7.993755] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 8.559326] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 8.559331] [drm] nouveau 0000:01:00.0: 0xDFE7: Parsing digital output script table [ 8.575222] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 8.575226] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 8.575230] [drm] nouveau 0000:01:00.0: 0xDF32: Parsing digital output script table [ 8.781633] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [ 8.787564] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 8.797288] drm: registered panic notifier [ 8.797723] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 44.291344] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 44.291359] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 44.291371] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 44.857077] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 44.878359] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 44.878368] [drm] nouveau 0000:01:00.0: 0xDFE7: Parsing digital output script table [ 44.894266] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 44.894274] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 44.894281] [drm] nouveau 0000:01:00.0: 0xDF32: Parsing digital output script table [ 45.100724] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [ 45.115349] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 518.211528] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 518.211541] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 518.211548] [drm] nouveau 0000:01:00.0: 0xDFB9: Parsing digital output script table [ 518.777135] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 520.792251] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 520.803069] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 520.803080] [drm] nouveau 0000:01:00.0: 0xDFE7: Parsing digital output script table [ 520.818982] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 520.818991] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 520.818999] [drm] nouveau 0000:01:00.0: 0xDF32: Parsing digital output script table [ 521.025467] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [ 521.029539] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-nouveau depends on: ii libc6 2.13-35 ii libdrm2 2.4.33-3 ii libudev0 175-7 ii xserver-xorg-core [xorg-video-abi-12] 2:1.12.3-1 Versions of packages xserver-xorg-video-nouveau recommends: ii libgl1-mesa-dri 8.0.4-2 xserver-xorg-video-nouveau suggests no packages. -- no debconf information
Attachment:
iceweasel.png
Description: PNG image