[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[ati/r128] stability problems 4.2.0-0pre1v1



Package: xserver-xfree86
Version: 4.2.0-0pre1v1
Severity: grave

Branden,

I have used reportbug to drag in the relevant informtion for this
problem report, but have only forwarded to debian-x.

I am running a Dell latitude C600 with the ATI Rage mobility chipset
which was working well with hardware acceleration (GLcore, dri, glx)
under the Debian 4.1 sid packages.

Upgrading to the pre-release 4.2 packages doesn't work well with all
sorts of screen instability.. and the occasional reboot.. I get a lot of
pixels jumping around the screen, sometimes images from within a web
browser also appear in the top right corner of the display and the like..

As you can see in the detailed logs I have disabled GLcore, dri & glx, but
with no improvement.

A possibly unrelated issue when I do enable GLcore, dri & glx is a kernel
module version conflict?

(WW) R128(0): Failed to set up write-combining range (0xf8300000,0x600000)
(WW) R128(0): Failed to set up write-combining range (0xf8200000,0x700000)
(WW) R128(0): Failed to set up write-combining range (0xf8100000,0x800000)
(WW) R128(0): Failed to set up write-combining range (0xf8000000,0x900000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) R128(0): [drm] created "r128" driver at busid "PCI:1:0:0"
(II) R128(0): [drm] added 8192 byte SAREA at 0xd08d6000
(II) R128(0): [drm] mapped SAREA 0xd08d6000 to 0x40014000
(II) R128(0): [drm] framebuffer handle = 0xf8000000
(II) R128(0): [drm] added 1 reserved context for kernel
(EE) R128(0): [dri] R128DRIScreenInit failed because of a version mismatch.
[dri] r128.o kernel module version is 2.1.6 but version 2.2 or greater is needed.
[dri] Disabling the DRI.
(EE) R128(0): [drm] failed to remove DRM signal handler
(II) R128(0): [drm] removed 1 reserved context for kernel
DRIUnlock called when not locked
(II) R128(0): [drm] unmapping 8192 bytes of SAREA 0xd08d6000 at 0x40014000
(II) R128(0): Memory manager initialized to (0,0) (1024,4608)


The rest of these logs are with GLcore, dri & glx disabled which still causes
the instability with the prerelease packages.

Mark


01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
01:00.0 Class 0300: 1002:4c46 (rev 02)

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.

Section "Files"
#	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
#	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
#	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"extmod"
	Load	"freetype"
#	Load	"dri"
#	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"v4l"

EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/mouse"
	Option		"Protocol"		"PS/2"
	Option		"Emulate3Buttons"	"true"
#	Option		"ZAxisMapping"		"4 5"
EndSection

#Section "InputDevice"
#	#Identifier	"Generic Mouse"
#	Driver		"mouse"
#	Option		"SendCoreEvents"	"true"
#	Option		"Device"		"/dev/input/mice"
#	Option		"Protocol"		"ImPS/2"
#	Option		"Emulate3Buttons"	"true"
#	Option		"ZAxisMapping"		"4 5"
#EndSection

#Section "Device"
	#Identifier	"Generic Video Card"
	#Driver		"ati"
#EndSection

Section "Device"
        Identifier "Rage 128"
        Driver     "r128"
        #Driver     "ati"
	VideoRam    9216
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	30-70
	VertRefresh	60-160
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Rage 128"
	Monitor		"Generic Monitor"
	DefaultDepth	16
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "1152x864" "640x480" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "1152x864" "640x480" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "1152x864" "640x480" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "1152x864" "640x480" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "1152x864" "640x480" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "1152x864" "640x480" "800x600"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
#	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION

The -bpp option is no longer supported.
	Use -depth to set the color depth, and use -fbbpp if you really
	need to force a non-default framebuffer (hardware) pixel format.

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 11 March 2002
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jun 23 15:25:32 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Rage 128"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) FontPath set to "/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.5
	XFree86 XInput driver : 0.3
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000800c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 104c,ac51 card 0000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:03:1: chip 104c,ac51 card 0000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 125d,1998 card 1028,00b1 rev 10 class 04,01,00 hdr 00
(II) PCI: 00:10:0: chip 10b7,6055 card 10b7,6456 rev 10 class 02,00,00 hdr 80
(II) PCI: 00:10:1: chip 10b7,1007 card 10b7,615b rev 10 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c46 card 1028,00b1 rev 02 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x8c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1 0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[1] -1 0	0x0000e400 - 0x0000e4ff (0x100) IX[B]
	[2] -1 0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[3] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1 0	0xfd000000 - 0xfeffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B]
(--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf8000000/26, 0xfdffc000/14, I/O @ 0xec00/8
(II) Addressable bus resource ranges are
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1 0	0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
	[1] -1 0	0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
	[2] -1 0	0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
	[3] -1 0	0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
	[4] -1 0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
	[5] -1 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[6] -1 0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[7] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[8] -1 0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[9] -1 0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[10] -1 0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[11] -1 0	0x0000dce0 - 0x0000dcff (0x20) IX[B]
	[12] -1 0	0x00000860 - 0x0000086f (0x10) IX[B]
	[13] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1 0	0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
	[1] -1 0	0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
	[2] -1 0	0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
	[3] -1 0	0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
	[4] -1 0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
	[5] -1 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[6] -1 0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[7] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[8] -1 0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[9] -1 0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[10] -1 0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[11] -1 0	0x0000dce0 - 0x0000dcff (0x20) IX[B]
	[12] -1 0	0x00000860 - 0x0000086f (0x10) IX[B]
	[13] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1 0	0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
	[6] -1 0	0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
	[7] -1 0	0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
	[8] -1 0	0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
	[9] -1 0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
	[10] -1 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[11] -1 0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[12] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[13] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1 0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[16] -1 0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[17] -1 0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[18] -1 0	0x0000dce0 - 0x0000dcff (0x20) IX[B]
	[19] -1 0	0x00000860 - 0x0000086f (0x10) IX[B]
	[20] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.1.10
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.0.1
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 4.0.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 6.4.8
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
	ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
	ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
	ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
	ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
	ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
	ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
	ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
	ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
	ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
	ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
	ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Mobility LF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1 0	0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
	[6] -1 0	0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
	[7] -1 0	0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
	[8] -1 0	0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
	[9] -1 0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
	[10] -1 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[11] -1 0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[12] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[13] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1 0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[16] -1 0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[17] -1 0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[18] -1 0	0x0000dce0 - 0x0000dcff (0x20) IX[B]
	[19] -1 0	0x00000860 - 0x0000086f (0x10) IX[B]
	[20] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1 0	0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
	[6] -1 0	0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
	[7] -1 0	0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
	[8] -1 0	0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
	[9] -1 0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
	[10] -1 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[11] -1 0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[12] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[13] 0 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[14] 0 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[15] 0 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[16] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1 0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[19] -1 0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[20] -1 0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[21] -1 0	0x0000dce0 - 0x0000dcff (0x20) IX[B]
	[22] -1 0	0x00000860 - 0x0000086f (0x10) IX[B]
	[23] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
	[24] 0 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[25] 0 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46)
(--) R128(0): Linear framebuffer at 0xf8000000
(--) R128(0): MMIO registers at 0xfdffc000
(II) R128(0): Video RAM override, using 9216 kB instead of 8192 kB
(**) R128(0): VideoRAM: 9216 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Panel size: 1024x768
(II) R128(0): Panel ID: Samsung LT141X8-L02     
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12000 max=27000; xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 8192 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M3
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M3  
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Generic Monitor: Using hsync range of 30.00-70.00 kHz
(II) R128(0): Generic Monitor: Using vrefresh range of 60.00-160.00 Hz
(II) R128(0): Clock range:  12.00 to 270.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (no mode of this name)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (no mode of this name)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "832x624" (no mode of this name)
(II) R128(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1024" (no mode of this name)
(II) R128(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using mode "1152x864" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 65.0 MHz, 70.3 kHz, 87.2 Hz
(II) R128(0): Modeline "1024x768"   65.00  1024 1048 1065 1344  768 770 776 806 +hsync +vsync
(**) R128(0): Default mode "640x480": 65.0 MHz, 37.5 kHz, 72.4 Hz
(II) R128(0): Modeline "640x480"   65.00  640 664 681 960  480 482 488 518 -hsync -vsync
(**) R128(0): Default mode "800x600": 65.0 MHz, 50.3 kHz, 78.8 Hz
(II) R128(0): Modeline "800x600"   65.00  800 824 841 1120  600 602 608 638 +hsync +vsync
(++) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(!!) R128(0): For information on using the multimedia capabilities
 of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0 0	0xfdffc000 - 0xfdffffff (0x4000) MS[B]
	[1] 0 0	0xf8000000 - 0xfbffffff (0x4000000) MS[B]
	[2] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1 0	0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
	[8] -1 0	0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
	[9] -1 0	0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
	[10] -1 0	0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
	[11] -1 0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
	[12] -1 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[13] -1 0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[14] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[15] 0 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] 0 0	0x0000ec00 - 0x0000ecff (0x100) IS[B]
	[19] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1 0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[22] -1 0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[23] -1 0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[24] -1 0	0x0000dce0 - 0x0000dcff (0x20) IX[B]
	[25] -1 0	0x00000860 - 0x0000086f (0x10) IX[B]
	[26] -1 0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
	[27] 0 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[28] 0 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) R128(0): Splitting WC range: base: 0xf8000000, size: 0x900000
(II) R128(0): Splitting WC range: base: 0xf8100000, size: 0x800000
(II) R128(0): Splitting WC range: base: 0xf8200000, size: 0x700000
(II) R128(0): Splitting WC range: base: 0xf8300000, size: 0x600000
(II) R128(0): Splitting WC range: base: 0xf8400000, size: 0x500000
(II) R128(0): Splitting WC range: base: 0xf8500000, size: 0x400000
(II) R128(0): Splitting WC range: base: 0xf8600000, size: 0x300000
(II) R128(0): Splitting WC range: base: 0xf8700000, size: 0x200000
(==) R128(0): Write-combining range (0xf8800000,0x100000)
(==) R128(0): Write-combining range (0xf8700000,0x200000)
(==) R128(0): Write-combining range (0xf8600000,0x300000)
(==) R128(0): Write-combining range (0xf8500000,0x400000)
(==) R128(0): Write-combining range (0xf8400000,0x500000)
(WW) R128(0): Failed to set up write-combining range (0xf8300000,0x600000)
(WW) R128(0): Failed to set up write-combining range (0xf8200000,0x700000)
(WW) R128(0): Failed to set up write-combining range (0xf8100000,0x800000)
(WW) R128(0): Failed to set up write-combining range (0xf8000000,0x900000)
(II) R128(0): Memory manager initialized to (0,0) (1024,4608)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 3838
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		22 256x256 slots
		7 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 1540)
(II) R128(0): Largest offscreen area available: 1024 x 3836
(WW) R128(0): Option "DPMS" is not used
(II) R128(0): Direct rendering disabled
Symbol drmFreeBufs from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Symbol drmR128TextureBlit from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Symbol drmFreeBufs from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(==) Configured Mouse: Buttons: 3
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)

-rw-r--r--    1 root     root        29660 Jun 23 15:25 /var/log/XFree86.0.log



-- System Information
Debian Release: 3.0
Architecture: i386
Kernel: Linux dell 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686
Locale: LANG=C, LC_CTYPE=C

Versions of packages xserver-xfree86 depends on:
ii  debconf                    1.1.14        Debian configuration management sy
ii  libc6                      2.2.5-6       GNU C Library: Shared libraries an
ii  xserver-common             4.2.0-0pre1v1 files and utilities common to all 
ii  zlib1g                     1:1.1.4-1     compression library - runtime

-- debconf information:
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
  shared/clobber_x-server_symlink: false
  xserver-xfree86/config/inputdevice/keyboard/options: 
  shared/default-x-server: xserver-xfree86
  xserver-xfree86/config/monitor/range_input_error: 
  xserver-xfree86/autodetect_video_card: true
* xserver-xfree86/config/inputdevice/mouse/port: /dev/psaux
  xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
  xserver-xfree86/config/inputdevice/keyboard/internal: 
  shared/no_known_x-server: 
  xserver-xfree86/clobber_XF86Config-4: 
  xserver-xfree86/config/doublequote_in_string_error: 
* xserver-xfree86/config/monitor/horiz-sync: 30
  xserver-xfree86/move_existing_nondebconf_config: false
  xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1024x768, 1152x864, 640x480, 800x600
* xserver-xfree86/config/monitor/lcd: true
  xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/manage_config_with_debconf: true
  xserver-xfree86/config/null_string_error: 
  xserver-xfree86/config/nonnumeric_string_error: 
  xserver-xfree86/config/inputdevice/keyboard/variant: 
* xserver-xfree86/config/inputdevice/keyboard/layout: us
  xserver-xfree86/config/device/identifier: 
* xserver-xfree86/config/inputdevice/keyboard/model: pc104
* xserver-xfree86/config/display/default_depth: 24
  xserver-xfree86/config/inputdevice/mouse/retry_detection: 
* xserver-xfree86/config/monitor/vert-refresh: 60-100
  xserver-xfree86/config/monitor/identifier: Generic Monitor
  shared/multiple_possible_x-servers: 
* xserver-xfree86/autodetect_mouse: true
  xserver-xfree86/autodetect_monitor: true
  xserver-xfree86/multiple_possible_x-drivers: 
* xserver-xfree86/config/inputdevice/mouse/protocol: PS/2
  xserver-xfree86/config/inputdevice/mouse/emulate3buttons: true
* xserver-xfree86/config/device/driver: ati
  xserver-xfree86/config/write_files_section: true
* xserver-xfree86/config/monitor/selection-method: Advanced
  xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, pex5, record, speedo, type1, vbe, xie
* xserver-xfree86/config/device/use_fbdev: true
  xserver-xfree86/config/device/video_ram: 
  xserver-xfree86/config/monitor/mode-list: 1280x960 @ 60Hz
  xserver-xfree86/config/device/bus_id_error: 
  xserver-xfree86/config/device/bus_id: 


-- 
To UNSUBSCRIBE, email to debian-x-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: