[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [SOLVED] Re: firmware-iwlwifi



On 10/3/22 20:42, David Wright wrote:
On Mon 03 Oct 2022 at 09:25:15 (+0300), Georgi Naplatanov wrote:
On 10/2/22 19:33, Charles Curley wrote:
On Sun, 2 Oct 2022 11:49:14 +0300
Georgi Naplatanov <gosho@oles.biz> wrote:

I have a notebook (Lenovo) with Intel's WiFi and I have minor issues
with it - sometimes works as expected but sometimes I cannot connect
to the notebook at first attempt throw SSH or sometimes latency is
high.

Which model Lenovo, and what is the exact wifi device? Please use lspci
to identify the device. For example, on my T520:

Actually I think I found out what was happening:
   - for failed connection attempts trough SSH - the notebook sometimes
switches to suspend/sleep mode and turns off its WiFi card and it
takes time WiFi connection to become active again

I wake up my machines remotely, and then have to unlock (encrypted)
/home, so my unlock script is:

unlock-axis ()
{
     until ping -c 1 -W 1 axis | grep 'bytes from'; do
         printf '%s' "axis ";
     done;
     printf '%(%H:%M:%S)T\n' -1 && ssh -X axis -l unlock
}

This is related to my impatience rather than any system fault.

These are the entries from kernel log:

[    3.453655] iwlwifi 0000:00:14.3: firmware: failed to load
iwlwifi-QuZ-a0-hr-b0-72.ucode (-2)
[    3.453695] firmware_class: See https://wiki.debian.org/Firmware
for information about missing firmware
[    3.454449] iwlwifi 0000:00:14.3: firmware: failed to load
iwlwifi-QuZ-a0-hr-b0-72.ucode (-2)
[    3.454488] iwlwifi 0000:00:14.3: Direct firmware load for
iwlwifi-QuZ-a0-hr-b0-72.ucode failed with error -2

[ … counting down to … ]

iwlwifi-QuZ-a0-hr-b0-64.ucode (-2)
[    3.455902] iwlwifi 0000:00:14.3: firmware: failed to load
iwlwifi-QuZ-a0-hr-b0-64.ucode (-2)
[    3.458342] iwlwifi 0000:00:14.3: Direct firmware load for
iwlwifi-QuZ-a0-hr-b0-64.ucode failed with error -2

I'm not sure that these messages correlate to my attempts to log in
into the notebook through SSH. The messages appear always in kernel
log.

So is this followed by an entry along the lines of:

   iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode

or does it say something like:

   iwlwifi 0000:00:14.3: minimum version required: iwlwifi-QuZ-a0-hr-b0-64
   iwlwifi 0000:00:14.3: maximum version supported: iwlwifi-QuZ-a0-hr-b0-72

The former would explain why your wifi is working, and
the latter would make it surprising that it still worked.


Hi David,

actually I have in the log:

[ 3.817724] iwlwifi 0000:00:14.3: loaded firmware version 63.c04f3485.0 QuZ-a0-hr-b0-63.ucode op_mode iwlmvm

I tried to attach full output from dmesg, lshw, and lspci but but my message didn't get into mail list so I deleted all my attachments and sent my message again.

Kind regards
Georgi


Reply to: