Re: disk going bad? or fuser related issues? . . .
On 10/9/19, Reco <recoverym4n@enotuniq.net> wrote:
> Please post the results of "smartctl -A".
>
> Reco
Here go the results another of my drives (Seagate Archive 8.00 TB ):
# date; smartctl --xall /dev/sdc
Mon Oct 7 11:22:16 CEST 2019
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Archive HDD
Device Model: ST8000AS0002-1NA17Z
Serial Number: Z840G7JM
LU WWN Device Id: 5 000c50 090d2f837
Firmware Version: AR17
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5980 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Oct 7 11:22:17 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 933) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 130131992
3 Spin_Up_Time PO---- 092 090 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1223
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 077 060 030 - 4350073761
9 Power_On_Hours -O--CK 096 096 000 - 3515
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 495
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 092 000 - 60130525206
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 067 034 045 Past 33 (0 144 33 33 0)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1642
193 Load_Cycle_Count -O--CK 099 099 000 - 3475
194 Temperature_Celsius -O---K 033 066 000 - 33 (0 13 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 117 099 000 - 130131992
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 189 000 - 300
240 Head_Flying_Hours ------ 100 253 000 - 1091 (225 209 0)
241 Total_LBAs_Written ------ 100 253 000 - 15892440529
242 Total_LBAs_Read ------ 100 253 000 - 338088883373
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error
unsupported scsi opcode
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x30 SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f SL R/W 16 Host vendor specific log
0xa1 SL VS 24 Device vendor specific log
0xa8-0xa9 SL VS 136 Device vendor specific log
0xc0 SL VS 1 Device vendor specific log
0xc1 SL VS 16 Device vendor specific log
0xda SL VS 8 Device vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 33/33 Celsius
Lifetime Min/Max Temperature: 13/65 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 3 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (12)
Index Estimated Time Temperature Celsius
13 2019-10-02 06:20 20 *
14 2019-10-02 07:19 ? -
15 2019-10-02 08:18 23 ****
16 2019-10-02 09:17 ? -
17 2019-10-02 10:16 25 ******
18 2019-10-02 11:15 ? -
19 2019-10-02 12:14 24 *****
20 2019-10-02 13:13 40 *********************
21 2019-10-02 14:12 44 *************************
22 2019-10-02 15:11 47 ****************************
23 2019-10-02 16:10 45 **************************
24 2019-10-02 17:09 43 ************************
25 2019-10-02 18:08 40 *********************
26 2019-10-02 19:07 31 ************
27 2019-10-02 20:06 ? -
28 2019-10-02 21:05 21 **
29 2019-10-02 22:04 38 *******************
30 2019-10-02 23:03 ? -
31 2019-10-03 00:02 21 **
32 2019-10-03 01:01 34 ***************
33 2019-10-03 02:00 29 **********
34 2019-10-03 02:59 25 ******
35 2019-10-03 03:58 24 *****
36 2019-10-03 04:57 24 *****
37 2019-10-03 05:56 24 *****
38 2019-10-03 06:55 33 **************
39 2019-10-03 07:54 37 ******************
40 2019-10-03 08:53 40 *********************
41 2019-10-03 09:52 42 ***********************
42 2019-10-03 10:51 40 *********************
43 2019-10-03 11:50 40 *********************
44 2019-10-03 12:49 39 ********************
45 2019-10-03 13:48 ? -
46 2019-10-03 14:47 23 ****
47 2019-10-03 15:46 38 *******************
48 2019-10-03 16:45 36 *****************
49 2019-10-03 17:44 30 ***********
50 2019-10-03 18:43 27 ********
51 2019-10-03 19:42 26 *******
... ..( 5 skipped). .. *******
57 2019-10-04 01:36 26 *******
58 2019-10-04 02:35 28 *********
59 2019-10-04 03:34 42 ***********************
60 2019-10-04 04:33 47 ****************************
61 2019-10-04 05:32 48 *****************************
62 2019-10-04 06:31 46 ***************************
63 2019-10-04 07:30 45 **************************
64 2019-10-04 08:29 44 *************************
65 2019-10-04 09:28 44 *************************
66 2019-10-04 10:27 34 ***************
67 2019-10-04 11:26 30 ***********
68 2019-10-04 12:25 41 **********************
69 2019-10-04 13:24 44 *************************
70 2019-10-04 14:23 47 ****************************
71 2019-10-04 15:22 ? -
72 2019-10-04 16:21 22 ***
73 2019-10-04 17:20 38 *******************
74 2019-10-04 18:19 40 *********************
75 2019-10-04 19:18 40 *********************
76 2019-10-04 20:17 41 **********************
77 2019-10-04 21:16 41 **********************
78 2019-10-04 22:15 ? -
79 2019-10-04 23:14 20 *
80 2019-10-05 00:13 ? -
81 2019-10-05 01:12 21 **
82 2019-10-05 02:11 ? -
83 2019-10-05 03:10 20 *
84 2019-10-05 04:09 ? -
85 2019-10-05 05:08 25 ******
86 2019-10-05 06:07 ? -
87 2019-10-05 07:06 26 *******
88 2019-10-05 08:05 41 **********************
89 2019-10-05 09:04 45 **************************
90 2019-10-05 10:03 ? -
91 2019-10-05 11:02 21 **
92 2019-10-05 12:01 ? -
93 2019-10-05 13:00 21 **
94 2019-10-05 13:59 ? -
95 2019-10-05 14:58 19 -
96 2019-10-05 15:57 32 *************
97 2019-10-05 16:56 30 ***********
98 2019-10-05 17:55 25 ******
99 2019-10-05 18:54 23 ****
100 2019-10-05 19:53 23 ****
101 2019-10-05 20:52 22 ***
102 2019-10-05 21:51 22 ***
103 2019-10-05 22:50 32 *************
104 2019-10-05 23:49 27 ********
105 2019-10-06 00:48 23 ****
106 2019-10-06 01:47 22 ***
107 2019-10-06 02:46 21 **
108 2019-10-06 03:45 37 ******************
109 2019-10-06 04:44 39 ********************
110 2019-10-06 05:43 42 ***********************
111 2019-10-06 06:42 41 **********************
112 2019-10-06 07:41 40 *********************
113 2019-10-06 08:40 39 ********************
114 2019-10-06 09:39 38 *******************
115 2019-10-06 10:38 40 *********************
116 2019-10-06 11:37 ? -
117 2019-10-06 12:36 16 -
118 2019-10-06 13:35 32 *************
119 2019-10-06 14:34 36 *****************
120 2019-10-06 15:33 37 ******************
121 2019-10-06 16:32 38 *******************
122 2019-10-06 17:31 38 *******************
123 2019-10-06 18:30 28 *********
124 2019-10-06 19:29 23 ****
125 2019-10-06 20:28 21 **
126 2019-10-06 21:27 25 ******
127 2019-10-06 22:26 24 *****
0 2019-10-06 23:25 21 **
1 2019-10-07 00:24 20 *
2 2019-10-07 01:23 20 *
3 2019-10-07 02:22 33 **************
4 2019-10-07 03:21 36 *****************
5 2019-10-07 04:20 36 *****************
6 2019-10-07 05:19 38 *******************
7 2019-10-07 06:18 37 ******************
8 2019-10-07 07:17 37 ******************
9 2019-10-07 08:16 ? -
10 2019-10-07 09:15 19 -
11 2019-10-07 10:14 ? -
12 2019-10-07 11:13 33 **************
SCT Error Recovery Control command not supported
Device Statistics (SMART Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (invalid
page 0xff in header) ==
0x03 ===== = = === == Rotating Media Statistics
(invalid page 0xff in header) ==
0x04 ===== = = === == General Errors Statistics
(invalid page 0xff in header) ==
0x05 ===== = = === == Temperature Statistics
(invalid page 0xff in header) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error
unsupported scsi opcode
Read SATA Phy Event Counters failed
#
# date; smartctl --test=long /dev/sdc
Mon Oct 7 11:31:53 CEST 2019
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately
in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in
off-line mode" successful.
Testing has begun.
Please wait 933 minutes for test to complete.
Test will complete after Tue Oct 8 03:05:15 2019
Use smartctl -X to abort test.
#
# date; smartctl -l selftest /dev/sdc
Tue Oct 8 06:38:59 CEST 2019
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3530 -
#
Reply to: