[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: All of my enoX interfaces are mapped to eth0



That's what I thought, too.  As you pointed out, the logs show each eno interface being assigned to a different MAC address.  However, I am able to assign IP addresses to any (or all) of those interfaces and then ping them from a different machine, even though the first interface is the only one which is physically connected to the network.  The other three interfaces are unplugged.  So that leads me to believe that all 4 eno interfaces are actually mapping to the first physical interface (a.k.a. eth0).

That's why I'm really confused.

Thanks!

On Fri, Mar 30, 2018 at 7:50 PM, David Wright <deblis@lionunicorn.co.uk> wrote:
On Fri 30 Mar 2018 at 16:19:30 (-0400), David Parker wrote:
> Hello,
>
> I have two identical HP servers running Debian 9.  One of them is a clean
> install of 9, whereas the other was upgraded from Debian 8.
>
> The one that was upgraded has no networking issues (indeed, it still uses
> the ethX interface names).  However, the one that was installed from
> scratch is having an issue which I can't seem to figure out.  There are 4
> network interfaces -- eno[1-4] -- but they are all getting mapped to eth0.
> It looks like they were mapped correctly until I reloaded the network
> driver a few days ago.  Any idea how I can get them back into a 1:1 mapping
> with the actual physical interfaces, instead of all pointing to the same
> one?
>
> Some dmesg output for reference:
>
> [Wed Mar 28 17:00:45 2018] tg3.c:v3.137 (May 11, 2014)
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.0 eth0: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e0
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.0 eth0: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001]
> dma_mask[64-bit]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.1 eth1: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e1
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.1 eth1: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001]
> dma_mask[64-bit]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.2 eth2: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e2
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.2 eth2: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.2 eth2: dma_rwctrl[00000001]
> dma_mask[64-bit]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.3 eth3: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e3
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.3 eth3: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.3 eth3: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:00:45 2018] tg3 0000:03:00.3 eth3: dma_rwctrl[00000001]
> dma_mask[64-bit]
>
>
>
> *[Wed Mar 28 17:00:45 2018] tg3 0000:03:00.1 eno2: renamed from eth1[Wed
> Mar 28 17:00:45 2018] tg3 0000:03:00.0 eno1: renamed from eth0[Wed Mar 28
> 17:00:45 2018] tg3 0000:03:00.3 eno4: renamed from eth3[Wed Mar 28 17:00:45
> 2018] tg3 0000:03:00.2 eno3: renamed from eth2*
>
> Looks fine, but then...
>
> [Wed Mar 28 17:12:33 2018] tg3.c:v3.137 (May 11, 2014)
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.0 eth0: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e0
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.0 eth0: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001]
> dma_mask[64-bit]
> *[Wed Mar 28 17:12:33 2018] tg3 0000:03:00.0 eno1: renamed from eth0*
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.1 eth0: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e1
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.1 eth0: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.1 eth0: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.1 eth0: dma_rwctrl[00000001]
> dma_mask[64-bit]
> *[Wed Mar 28 17:12:33 2018] tg3 0000:03:00.1 eno2: renamed from eth0*
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.2 eth0: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e2
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.2 eth0: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.2 eth0: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.2 eth0: dma_rwctrl[00000001]
> dma_mask[64-bit]
> *[Wed Mar 28 17:12:33 2018] tg3 0000:03:00.2 eno3: renamed from eth0*
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.3 eth0: Tigon3
> [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:ec:e3
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.3 eth0: attached PHY is 5719C
> (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.3 eth0: RXcsums[1] LinkChgREG[0]
> MIirq[0] ASF[1] TSOcap[1]
> [Wed Mar 28 17:12:33 2018] tg3 0000:03:00.3 eth0: dma_rwctrl[00000001]
> dma_mask[64-bit]
> *[Wed Mar 28 17:12:33 2018] tg3 0000:03:00.3 eno4: renamed from eth0*
>
> I should note that this server is now in production, so it would be
> fantastic if I can solve this without taking down eno1 as that is the
> primary network link.  Any help is greatly appreciated.

Colour me stupid but can you explain what the problem is. All I see is
two sets of logs, both of which result in this assignment:

 eno1: MAC address d8:9d:67:2c:ec:e0
 eno2: MAC address d8:9d:67:2c:ec:e1
 eno3: MAC address d8:9d:67:2c:ec:e2
 eno4: MAC address d8:9d:67:2c:ec:e3

Your system is using scheme 1 to arrive at this state:
"Names incorporating Firmware/BIOS provided index numbers
for on-board devices (example: eno1)".

https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/

Cheers,
David.




--
Dave Parker '11
Database & Systems Administrator
Utica College
Integrated Information Technology Services
(315) 792-3229
Registered Linux User #408177

Reply to: