When I plug my Canon SX100 in, I get this from journalctl -r (left off
the rest because it was from before the camera was plugged in):
Oct 06 10:35:11 transponder org.gtk.Private.GPhoto2VolumeMonitor[2378]:
(process:3953): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM
property, ignoring
Oct 06 10:35:10 transponder colord[1273]: (colord:1273): Cd-WARNING **:
CdMain: failed to emit DeviceAdded: failed to register object: An object
is already exported for the interface
org.freedesktop.ColorManager.Device at
/org/freedesktop/ColorManager/devices/sysfs__null_
Oct 06 10:35:10 transponder mtp-probe[9186]: bus: 6, device: 4 was not
an MTP device
Oct 06 10:35:10 transponder mtp-probe[9186]: checking bus 6, device 4:
"/sys/devices/pci0000:00/0000:00:13.2/usb6/6-4"
Oct 06 10:35:10 transponder kernel: usb 6-4: SerialNumber:
7A7C1320F2174D878863C1C10BA49A7D
Oct 06 10:35:10 transponder kernel: usb 6-4: Manufacturer: Canon Inc.
Oct 06 10:35:10 transponder kernel: usb 6-4: Product: Canon Digital
Camera
Oct 06 10:35:10 transponder kernel: usb 6-4: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Oct 06 10:35:10 transponder kernel: usb 6-4: New USB device found,
idVendor=04a9, idProduct=315e
Oct 06 10:35:10 transponder kernel: usb 6-4: new high-speed USB device
number 4 using ehci-pci
When I put the SD card in a USB card reader and insert the reader I get:
Oct 06 10:41:39 transponder su[9461]: Successful su for root by garydale
Oct 06 10:41:21 transponder kernel: usb 6-5: usbfs: process 9447
(mtp.so) did not claim interface 0 before use
Oct 06 10:41:21 transponder kernel: usb 6-5: usbfs: process 9447
(mtp.so) did not claim interface 0 before use
Oct 06 10:41:21 transponder kernel: usb 6-5: usbfs: process 9447
(mtp.so) did not claim interface 0 before use
Oct 06 10:41:19 transponder kernel: usb 6-5: usbfs: process 9455
(mtp.so) did not claim interface 0 before use
Oct 06 10:41:18 transponder kernel: usb 6-5: reset high-speed USB device
number 2 using ehci-pci
Oct 06 10:41:18 transponder kernel: usb 6-5: usbfs: process 9455
(mtp.so) did not claim interface 0 before use
Oct 06 10:41:11 transponder org.kde.kuiserver[2378]: kuiserver: removing
jobview from list, it finished
Oct 06 10:41:11 transponder org.kde.kuiserver[2378]: kuiserver: making
async call of terminate for: "/DataEngine/applicationjobs/JobView_2"
Oct 06 10:41:11 transponder org.kde.kuiserver[2378]: kuiserver: removing
jobview from list, it finished
Oct 06 10:41:11 transponder org.kde.kuiserver[2378]: kuiserver: making
async call of terminate for: "/DataEngine/applicationjobs/JobView_2"
Oct 06 10:41:11 transponder org.kde.kuiserver[2378]: kuiserver: adding
job contact for address: ":1.19" objectPath:
"/DataEngine/applicationjobs/JobView_2"
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: [sdh] Attached SCSI
removable disk
Oct 06 10:41:07 transponder kernel: sdh: sdh1
Oct 06 10:41:07 transponder kernel: sd 11:0:0:2: [sdj] Attached SCSI
removable disk
Oct 06 10:41:07 transponder kernel: sd 11:0:0:1: [sdi] Attached SCSI
removable disk
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: [sdh] Assuming drive
cache: write through
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: [sdh] No Caching mode
page found
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: [sdh] Mode Sense: 03 00
00 00
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: [sdh] Write Protect is
off
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: [sdh] 7744512 512-byte
logical blocks: (3.96 GB/3.69 GiB)
Oct 06 10:41:07 transponder kernel: sd 11:0:0:2: Attached scsi generic
sg10 type 0
Oct 06 10:41:07 transponder kernel: sd 11:0:0:1: Attached scsi generic
sg9 type 0
Oct 06 10:41:07 transponder kernel: sd 11:0:0:0: Attached scsi generic
sg8 type 0
Oct 06 10:41:07 transponder kernel: scsi 11:0:0:2: Direct-Access
USB2.0 CardReader SD2 0100 PQ: 0 ANSI: 0
Oct 06 10:41:07 transponder kernel: scsi 11:0:0:1: Direct-Access
USB2.0 CardReader SD1 0100 PQ: 0 ANSI: 0
Oct 06 10:41:07 transponder kernel: scsi 11:0:0:0: Direct-Access
USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
Oct 06 10:41:06 transponder mtp-probe[9380]: bus: 3, device: 4 was not
an MTP device
Oct 06 10:41:06 transponder mtp-probe[9380]: checking bus 3, device 4:
"/sys/devices/pci0000:00/0000:00:12.2/usb3/3-5"
Oct 06 10:41:06 transponder kernel: scsi host11: usb-storage 3-5:1.0
Oct 06 10:41:06 transponder kernel: usb-storage 3-5:1.0: USB Mass
Storage device detected
Oct 06 10:41:06 transponder kernel: usb 3-5: SerialNumber: 146030377350
Oct 06 10:41:06 transponder kernel: usb 3-5: Manufacturer: ENE
Oct 06 10:41:06 transponder kernel: usb 3-5: Product: UB6225
Oct 06 10:41:06 transponder kernel: usb 3-5: New USB device strings:
Mfr=1, Product=2, SerialNumber=4
Oct 06 10:41:06 transponder kernel: usb 3-5: New USB device found,
idVendor=0cf2, idProduct=6225
Oct 06 10:41:05 transponder kernel: usb 3-5: new high-speed USB device
number 4 using ehci-pci
Interestingly, this time I got a device message pop up but the card
still wasn't readable.