On Wed, Nov 19, 2014 at 11:59:17AM +0100, Achim Spreen wrote: > Hello. > eth0 now is up after boot. I have resolved the configuration of the > isc-dhcp-server, it has needed 'INTERFACES="eth0"' in > 'etc/default/dhcp3-server'. > > But LAN still not works and the output of ethtool is the same as before: > ..., Speed: Unknown, Duplex: Unknown,..., Link detected: no. > > Now i get in /var/log/syslog: > ... > Nov 17 23:41:04 Venus kernel: [ 3114.982968] forcedeth 0000:00:14.0: eth0: > no link during initialization > Nov 17 23:41:04 Venus avahi-daemon[2937]: New relevant interface eth0.IPv4 > for mDNS. > Nov 17 23:41:04 Venus avahi-daemon[2937]: Registering new address record for > 192.168.0.1 on eth0.IPv4 > Nov 17 23:41:04 Venus kernel: [ 3114.984643] ADDRCONF(NETDEV_UP): eth0: link > is not ready > Nov 17 23:41:04 Venus aspray[3900]: WARNING: Initialising interface eth0 > which does not have link > Nov 17 23:42:17 Venus dhcpd: Wrote 0 leases to leases file. > ... > > and this > :~# ip link > 1: lo: .. > 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state > DOWN mode DEFAULT qlen 1000 > link/ether 00:13:8f:6c:67:24 brd ff:ff:ff:ff:ff:ff > > Anyone have a idea which could help ? Having a google, some people have had issues with the PHY powering down and not being reset properly. You could try adding phy_power_down=0 as an option to the module (write "options forcedeth phy_power_down=0" to /etc/modprobe.d/forcedeth.conf"). > Bye > > > -- > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org with a subject > of "unsubscribe". Trouble? Contact listmaster@lists.debian.org > Archive: [🔎] b0fae160d9cc1d1d429608a2dc6f5b92@andaluciajunta.es">https://lists.debian.org/[🔎] b0fae160d9cc1d1d429608a2dc6f5b92@andaluciajunta.es >
Attachment:
signature.asc
Description: Digital signature