[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Nvidia MCP51 Ethernet controller, link is not ready - UPDATE

eth0 now is up after boot. I have resolved the configuration of the isc-dhcp-server, it has needed 'INTERFACES="eth0"' in 'etc/default/dhcp3-server'.

But LAN still not works and the output of ethtool is the same as before: ..., Speed: Unknown, Duplex: Unknown,..., Link detected: no.

Now i get in /var/log/syslog:
Nov 17 23:41:04 Venus kernel: [ 3114.982968] forcedeth 0000:00:14.0: eth0: no link during initialization Nov 17 23:41:04 Venus avahi-daemon[2937]: New relevant interface eth0.IPv4 for mDNS. Nov 17 23:41:04 Venus avahi-daemon[2937]: Registering new address record for on eth0.IPv4 Nov 17 23:41:04 Venus kernel: [ 3114.984643] ADDRCONF(NETDEV_UP): eth0: link is not ready Nov 17 23:41:04 Venus aspray[3900]: WARNING: Initialising interface eth0 which does not have link
Nov 17 23:42:17 Venus dhcpd: Wrote 0 leases to leases file.

and this
:~# ip link
1: lo: ..
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
    link/ether 00:13:8f:6c:67:24 brd ff:ff:ff:ff:ff:ff

Anyone have a idea which could help ?

Reply to: