adsl2+ modem bridging

[rajiv chavan <rc214105@gmail.com>]

Mon, 11 Aug 2014 05:44:18 +0000

Any tips on using SEM India DNA-A201 modem in bridge mode?
Modem has adsl and ppp commands. No man pages.
All attempts lead to dangling IP address (wan IP) reachable only from
localhost.
====
> adsl
Usage: adsl start [--up] [--mod <a|d|l|t|2|p|e|m>] [--lpair <(i)nner|(o)uter>]
           [--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>]
[--sesdrop <on|off>] [--sra <on|off>]
           [--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt <on|off>]
       adsl stop
       adsl connection [--up] [--down] [--loopback] [--reverb]
           [--medley] [--noretrain] [--L3] [--diagmode] [--L0]
           [--tones]
       adsl configure [--mod <a|d|l|t|2|p|e|madsl>] [--lpair <(i)nner|(o)uter>]
           [--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>]
[--sesdrop <on|off>] [--sra <on|off>]
           [--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt  <on|off>]
        bert [--start <#seconds>] [--stop] [--show]
       adsl afelb [--time <sec>] [--tones] [--signal <1/2/8>]
       adsl qlnmntr [--time <sec>] [--freq <msec>]
       adsl inm [--start <BB_THRESH 10*dB> <INMAITO> <INMIATS>]
[--stop] [--show]
       adsl nlnm [--show ] [--setThld <Thld_Num_Tones>]
       adsl diag [--logstart <nBytes>] [--logpause] [--logstop]
[--loguntilbufferfull <nBytes>] [--loguntilretrain <nBytes>]
       adsl info [--state] [--show] [--stats] [--SNR] [--QLN] [--Hlog]
[--Hlin] [--HlinS] [--Bits]
           [--linediag] [--reset] [--vendor] [--cfg]
       adsl --version
       adsl --help
====
> ppp
Usage: ppp config <port.vpi.vci> [<connection id>] <up|down>
       ppp --help
       connect or disconnect ppp
====