A friend got fed up with windos, and I have Debian Testing on his laptop right now. Everything, except noted below works great. The only problem I am running into is with Skype, and having it not find mic found. I'm told it worked under windos. Below are the outputs of dmesg & lspci. Thank you ********** DMESG ********** [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=37618180-a1ed-43a3-8f52-61684f4068b1 ro quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000017d6ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000017d70000-0x0000000017dbefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000017dbf000-0x0000000017e57fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000017e58000-0x0000000017ebefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000017ebf000-0x0000000017eebfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000017eec000-0x0000000017efefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000017eff000-0x0000000017efffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e0ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Pavillion dv7 Notebook pc/30FC, BIOS F.49 08/17/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x17f00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FFF00000 mask FFFFF00000 write-protect [ 0.000000] 1 base 0000000000 mask FFF0000000 write-back [ 0.000000] 2 base 0010000000 mask FFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE [ 0.000000] BRK [0x01aa4000, 0x01aa4fff] PGTABLE [ 0.000000] BRK [0x01aa5000, 0x01aa5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x17a00000-0x17bfffff] [ 0.000000] [mem 0x17a00000-0x17bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x14000000-0x179fffff] [ 0.000000] [mem 0x14000000-0x179fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x13ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x13ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x17c00000-0x17d6ffff] [ 0.000000] [mem 0x17c00000-0x17d6ffff] page 4k [ 0.000000] BRK [0x01aa6000, 0x01aa6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x17dbf000-0x17e57fff] [ 0.000000] [mem 0x17dbf000-0x17e57fff] page 4k [ 0.000000] BRK [0x01aa7000, 0x01aa7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x17ebf000-0x17eebfff] [ 0.000000] [mem 0x17ebf000-0x17eebfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x17eff000-0x17efffff] [ 0.000000] [mem 0x17eff000-0x17efffff] page 4k [ 0.000000] RAMDISK: [mem 0x15d1c000-0x16b57fff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 0000000017efe120 00005C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0000000017efd000 0000F4 (v04 HP TRINITY 00000003 LOHR 01000013) [ 0.000000] ACPI: DSDT 0000000017eef000 00A2F0 (v01 HP TRINITY F0000000 LOHR 01000013) [ 0.000000] ACPI: FACS 0000000017e61000 000040 [ 0.000000] ACPI: HPET 0000000017efc000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: APIC 0000000017efb000 000084 (v02 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: MCFG 0000000017efa000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: BOOT 0000000017eee000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: SLIC 0000000017eed000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: SSDT 0000000017eec000 000386 (v01 AMD PowerNow 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000017efffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17efffff] [ 0.000000] NODE_DATA [mem 0x17ee7000-0x17eebfff] [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880016e00000-ffff8800173fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x17d6ffff] [ 0.000000] node 0: [mem 0x17dbf000-0x17e57fff] [ 0.000000] node 0: [mem 0x17ebf000-0x17eebfff] [ 0.000000] node 0: [mem 0x17eff000-0x17efffff] [ 0.000000] On node 0 totalpages: 97749 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1285 pages used for memmap [ 0.000000] DMA32 zone: 93751 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x17d70000-0x17dbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x17e58000-0x17ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x17eec000-0x17efefff] [ 0.000000] e820: [mem 0x17f00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880017a00000 s86080 r8192 d24512 u524288 [ 0.000000] pcpu-alloc: s86080 r8192 d24512 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 96387 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=37618180-a1ed-43a3-8f52-61684f4068b1 ro quiet [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 358560K/390996K available (4909K kernel code, 704K rwdata, 1660K rodata, 1000K init, 960K bss, 32436K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2100.052 MHz processor [ 0.000049] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.10 BogoMIPS (lpj=8400208) [ 0.000053] pid_max: default: 32768 minimum: 301 [ 0.000067] ACPI: Core revision 20131218 [ 0.005003] ACPI: All ACPI Tables successfully acquired [ 0.061312] Security Framework initialized [ 0.061320] AppArmor: AppArmor disabled by boot time parameter [ 0.061322] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.061385] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.061792] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.062023] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.062027] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.062320] Initializing cgroup subsys memory [ 0.062330] Initializing cgroup subsys devices [ 0.062332] Initializing cgroup subsys freezer [ 0.062335] Initializing cgroup subsys net_cls [ 0.062338] Initializing cgroup subsys blkio [ 0.062340] Initializing cgroup subsys perf_event [ 0.062374] tseg: 0017f00000 [ 0.062377] CPU: Physical Processor ID: 0 [ 0.062379] CPU: Processor Core ID: 0 [ 0.062381] mce: CPU supports 5 MCE banks [ 0.062394] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.062394] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.062394] tlb_flushall_shift: 6 [ 0.062500] Freeing SMP alternatives memory: 20K (ffffffff819ac000 - ffffffff819b1000) [ 0.064418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.104141] smpboot: CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-72 (fam: 11, model: 03, stepping: 01) [ 0.211985] Performance Events: AMD PMU driver. [ 0.211992] ... version: 0 [ 0.211994] ... bit width: 48 [ 0.211995] ... generic registers: 4 [ 0.211997] ... value mask: 0000ffffffffffff [ 0.211998] ... max period: 00007fffffffffff [ 0.212000] ... fixed-purpose events: 0 [ 0.212001] ... event mask: 000000000000000f [ 0.212425] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.212588] x86: Booting SMP configuration: [ 0.212591] .... node #0, CPUs: #1 [ 0.225702] TSC synchronization [CPU#0 -> CPU#1]: [ 0.225704] Measured 228959884 cycles TSC warp between CPUs, turning off TSC clock. [ 0.225709] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.225774] x86: Booted up 1 node, 2 CPUs [ 0.225777] smpboot: Total of 2 processors activated (8400.20 BogoMIPS) [ 0.076405] devtmpfs: initialized [ 0.083659] PM: Registering ACPI NVS region [mem 0x17e58000-0x17ebefff] (421888 bytes) [ 0.083659] pinctrl core: initialized pinctrl subsystem [ 0.084063] NET: Registered protocol family 16 [ 0.084209] cpuidle: using governor ladder [ 0.084211] cpuidle: using governor menu [ 0.084222] TOM: 0000000020000000 aka 512M [ 0.084226] Fam 10h mmconf [mem 0xe0000000-0xe0ffffff] [ 0.084369] ACPI: bus type PCI registered [ 0.084372] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.084502] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xe0000000-0xe0ffffff] (base 0xe0000000) [ 0.084506] PCI: MMCONFIG at [mem 0xe0000000-0xe0ffffff] reserved in E820 [ 0.085542] PCI: Using configuration type 1 for base access [ 0.085675] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.085677] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.085678] mtrr: probably your BIOS does not setup all CPUs. [ 0.085679] mtrr: corrected configuration. [ 0.086361] bio: create slab <bio-0> at 0 [ 0.086361] ACPI: Added _OSI(Module Device) [ 0.086361] ACPI: Added _OSI(Processor Device) [ 0.086361] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.086361] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089171] ACPI: Executed 1 blocks of module-level executable AML code [ 0.091169] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.120063] ACPI: Interpreter enabled [ 0.120082] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.120089] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.120117] ACPI: (supports S0 S3 S4 S5) [ 0.120120] ACPI: Using IOAPIC for interrupt routing [ 0.120260] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.120459] ACPI: No dock devices found. [ 0.121039] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.121065] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.121459] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.121486] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.315614] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.315625] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.315669] \_SB_.PCI0:_OSC request failed [ 0.315671] _OSC request data:1 1f 0 [ 0.315676] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.316780] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff]) [ 0.316787] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge [ 0.317124] PCI host bridge to bus 0000:00 [ 0.317129] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.317132] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.317134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.317137] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.317139] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.317142] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.317144] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.317147] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.317149] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.317152] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.317155] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.317157] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.317160] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.317162] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.317165] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.317167] pci_bus 0000:00: root bus resource [mem 0x20000000-0xdfffffff] [ 0.317170] pci_bus 0000:00: root bus resource [mem 0xe1000000-0xffffffff] [ 0.317188] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.317352] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400 [ 0.317524] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 0.317585] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.317691] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 [ 0.317749] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.317854] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.317913] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.318017] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.318076] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.324036] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.324139] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.324164] pci 0000:00:11.0: reg 0x10: [io 0x8038-0x803f] [ 0.324176] pci 0000:00:11.0: reg 0x14: [io 0x804c-0x804f] [ 0.324188] pci 0000:00:11.0: reg 0x18: [io 0x8030-0x8037] [ 0.324201] pci 0000:00:11.0: reg 0x1c: [io 0x8048-0x804b] [ 0.324213] pci 0000:00:11.0: reg 0x20: [io 0x8010-0x801f] [ 0.324226] pci 0000:00:11.0: reg 0x24: [mem 0x26508000-0x265083ff] [ 0.324409] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.324426] pci 0000:00:12.0: reg 0x10: [mem 0x26507000-0x26507fff] [ 0.332029] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.332122] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.332139] pci 0000:00:12.1: reg 0x10: [mem 0x26506000-0x26506fff] [ 0.332304] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.332304] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.332304] pci 0000:00:12.2: reg 0x10: [mem 0x26508500-0x265085ff] [ 0.332304] pci 0000:00:12.2: supports D1 D2 [ 0.332304] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.336029] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.336130] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.336148] pci 0000:00:13.0: reg 0x10: [mem 0x26505000-0x26505fff] [ 0.336339] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.336357] pci 0000:00:13.1: reg 0x10: [mem 0x26504000-0x26504fff] [ 0.336357] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.336357] pci 0000:00:13.2: reg 0x10: [mem 0x26508400-0x265084ff] [ 0.336357] pci 0000:00:13.2: supports D1 D2 [ 0.336357] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.336357] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.336529] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.336550] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.336562] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.336575] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.336587] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.336599] pci 0000:00:14.1: reg 0x20: [io 0x8000-0x800f] [ 0.336782] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.336809] pci 0000:00:14.2: reg 0x10: [mem 0x26500000-0x26503fff 64bit] [ 0.336893] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.337029] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.337234] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.337402] pci 0000:00:18.0: [1022:1300] type 00 class 0x060000 [ 0.337511] pci 0000:00:18.1: [1022:1301] type 00 class 0x060000 [ 0.337611] pci 0000:00:18.2: [1022:1302] type 00 class 0x060000 [ 0.337715] pci 0000:00:18.3: [1022:1303] type 00 class 0x060000 [ 0.337827] pci 0000:00:18.4: [1022:1304] type 00 class 0x060000 [ 0.338078] pci 0000:01:05.0: [1002:9612] type 00 class 0x030000 [ 0.338092] pci 0000:01:05.0: reg 0x10: [mem 0x20000000-0x23ffffff pref] [ 0.338100] pci 0000:01:05.0: reg 0x14: [io 0x7000-0x70ff] [ 0.338107] pci 0000:01:05.0: reg 0x18: [mem 0x26400000-0x2640ffff] [ 0.338124] pci 0000:01:05.0: reg 0x24: [mem 0x26300000-0x263fffff] [ 0.338152] pci 0000:01:05.0: supports D1 D2 [ 0.338216] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300 [ 0.338231] pci 0000:01:05.1: reg 0x10: [mem 0x26410000-0x26413fff] [ 0.338290] pci 0000:01:05.1: supports D1 D2 [ 0.338383] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.338388] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.338392] pci 0000:00:01.0: bridge window [mem 0x26300000-0x264fffff] [ 0.338398] pci 0000:00:01.0: bridge window [mem 0x20000000-0x23ffffff 64bit pref] [ 0.338498] acpiphp: Slot [1] registered [ 0.338505] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.338510] pci 0000:00:04.0: bridge window [io 0x3000-0x6fff] [ 0.338514] pci 0000:00:04.0: bridge window [mem 0x25300000-0x262fffff] [ 0.338519] pci 0000:00:04.0: bridge window [mem 0x24000000-0x24ffffff 64bit pref] [ 0.338650] pci 0000:08:00.0: [197b:2382] type 00 class 0x088000 [ 0.338670] pci 0000:08:00.0: reg 0x10: [mem 0x25200300-0x252003ff] [ 0.338739] pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.338889] pci 0000:08:00.2: [197b:2381] type 00 class 0x080501 [ 0.338908] pci 0000:08:00.2: reg 0x10: [mem 0x25200200-0x252002ff] [ 0.339118] pci 0000:08:00.3: [197b:2383] type 00 class 0x088000 [ 0.339137] pci 0000:08:00.3: reg 0x10: [mem 0x25200100-0x252001ff] [ 0.339347] pci 0000:08:00.4: [197b:2384] type 00 class 0x088000 [ 0.339366] pci 0000:08:00.4: reg 0x10: [mem 0x25200000-0x252000ff] [ 0.348020] pci 0000:00:05.0: PCI bridge to [bus 08] [ 0.348028] pci 0000:00:05.0: bridge window [mem 0x25200000-0x252fffff] [ 0.348117] pci 0000:09:00.0: [168c:002a] type 00 class 0x028000 [ 0.348139] pci 0000:09:00.0: reg 0x10: [mem 0x25100000-0x2510ffff 64bit] [ 0.348255] pci 0000:09:00.0: supports D1 [ 0.348257] pci 0000:09:00.0: PME# supported from D0 D1 D3hot [ 0.348337] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.348346] pci 0000:00:06.0: PCI bridge to [bus 09] [ 0.348353] pci 0000:00:06.0: bridge window [mem 0x25100000-0x251fffff] [ 0.348443] pci 0000:0a:00.0: [10ec:8136] type 00 class 0x020000 [ 0.348459] pci 0000:0a:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.348486] pci 0000:0a:00.0: reg 0x18: [mem 0x25010000-0x25010fff 64bit pref] [ 0.348503] pci 0000:0a:00.0: reg 0x20: [mem 0x25000000-0x2500ffff 64bit pref] [ 0.348515] pci 0000:0a:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.348586] pci 0000:0a:00.0: supports D1 D2 [ 0.348589] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.356014] pci 0000:00:07.0: PCI bridge to [bus 0a] [ 0.356019] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff] [ 0.356026] pci 0000:00:07.0: bridge window [mem 0x25000000-0x250fffff 64bit pref] [ 0.356128] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode) [ 0.356134] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.356142] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.356145] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.356148] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.356150] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.356153] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.356156] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.356159] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.356161] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.356164] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.356167] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.356170] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.356172] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.356175] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.356178] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.356181] pci 0000:00:14.4: bridge window [mem 0x20000000-0xdfffffff] (subtractive decode) [ 0.356183] pci 0000:00:14.4: bridge window [mem 0xe1000000-0xffffffff] (subtractive decode) [ 0.416103] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416166] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416226] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416285] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416404] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416463] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416522] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.416740] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.416821] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.416940] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.416940] vgaarb: loaded [ 0.416940] vgaarb: bridge control possible 0000:01:05.0 [ 0.416940] PCI: Using ACPI for IRQ routing [ 0.416940] PCI: pci_cache_line_size set to 64 bytes [ 0.416940] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.416940] e820: reserve RAM buffer [mem 0x17d70000-0x17ffffff] [ 0.416940] e820: reserve RAM buffer [mem 0x17e58000-0x17ffffff] [ 0.416940] e820: reserve RAM buffer [mem 0x17eec000-0x17ffffff] [ 0.416940] e820: reserve RAM buffer [mem 0x17f00000-0x17ffffff] [ 0.416940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.416940] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.420002] Switched to clocksource hpet [ 0.423417] pnp: PnP ACPI init [ 0.423451] ACPI: bus type PNP registered [ 0.423694] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.423698] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.423703] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.423871] pnp 00:01: [dma 4] [ 0.423916] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.424038] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.424103] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.424145] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.424229] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.424318] pnp 00:06: Plug and Play ACPI device, IDs SYN0153 AUI0216 AUI0217 PNP0f13 (active) [ 0.424399] system 00:07: [io 0x0400-0x04cf] could not be reserved [ 0.424403] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.424406] system 00:07: [io 0x04d6] has been reserved [ 0.424409] system 00:07: [io 0x0680-0x06ff] has been reserved [ 0.424412] system 00:07: [io 0x077a] has been reserved [ 0.424415] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.424418] system 00:07: [io 0x0c14] has been reserved [ 0.424421] system 00:07: [io 0x0c50-0x0c52] has been reserved [ 0.424424] system 00:07: [io 0x0c6c] has been reserved [ 0.424426] system 00:07: [io 0x0c6f] has been reserved [ 0.424429] system 00:07: [io 0x0cd0-0x0cdb] has been reserved [ 0.424433] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.424498] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.424502] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.424505] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.480174] pnp 00:09: Plug and Play ACPI device, IDs ENE0100 (active) [ 0.480237] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.480434] pnp: PnP ACPI: found 11 devices [ 0.480436] ACPI: bus type PNP unregistered [ 0.489226] pci 0000:08:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.489232] pci 0000:0a:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.489334] pci 0000:00:05.0: BAR 15: assigned [mem 0x26600000-0x266fffff pref] [ 0.489341] pci 0000:00:07.0: BAR 14: assigned [mem 0x26700000-0x267fffff] [ 0.489346] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.489349] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.489354] pci 0000:00:01.0: bridge window [mem 0x26300000-0x264fffff] [ 0.489358] pci 0000:00:01.0: bridge window [mem 0x20000000-0x23ffffff 64bit pref] [ 0.489364] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.489367] pci 0000:00:04.0: bridge window [io 0x3000-0x6fff] [ 0.489371] pci 0000:00:04.0: bridge window [mem 0x25300000-0x262fffff] [ 0.489375] pci 0000:00:04.0: bridge window [mem 0x24000000-0x24ffffff 64bit pref] [ 0.489382] pci 0000:08:00.0: BAR 6: assigned [mem 0x26600000-0x2660ffff pref] [ 0.489385] pci 0000:00:05.0: PCI bridge to [bus 08] [ 0.489390] pci 0000:00:05.0: bridge window [mem 0x25200000-0x252fffff] [ 0.489394] pci 0000:00:05.0: bridge window [mem 0x26600000-0x266fffff pref] [ 0.489399] pci 0000:00:06.0: PCI bridge to [bus 09] [ 0.489404] pci 0000:00:06.0: bridge window [mem 0x25100000-0x251fffff] [ 0.489412] pci 0000:0a:00.0: BAR 6: assigned [mem 0x25020000-0x2503ffff pref] [ 0.489414] pci 0000:00:07.0: PCI bridge to [bus 0a] [ 0.489417] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff] [ 0.489422] pci 0000:00:07.0: bridge window [mem 0x26700000-0x267fffff] [ 0.489426] pci 0000:00:07.0: bridge window [mem 0x25000000-0x250fffff 64bit pref] [ 0.489431] pci 0000:00:14.4: PCI bridge to [bus 80-8f] [ 0.489469] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.489485] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.489487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.489490] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.489493] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.489496] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.489498] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.489501] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.489504] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.489506] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.489509] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.489511] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.489514] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.489517] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.489519] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.489522] pci_bus 0000:00: resource 18 [mem 0x20000000-0xdfffffff] [ 0.489525] pci_bus 0000:00: resource 19 [mem 0xe1000000-0xffffffff] [ 0.489528] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 0.489530] pci_bus 0000:01: resource 1 [mem 0x26300000-0x264fffff] [ 0.489533] pci_bus 0000:01: resource 2 [mem 0x20000000-0x23ffffff 64bit pref] [ 0.489536] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff] [ 0.489539] pci_bus 0000:02: resource 1 [mem 0x25300000-0x262fffff] [ 0.489542] pci_bus 0000:02: resource 2 [mem 0x24000000-0x24ffffff 64bit pref] [ 0.489544] pci_bus 0000:08: resource 1 [mem 0x25200000-0x252fffff] [ 0.489547] pci_bus 0000:08: resource 2 [mem 0x26600000-0x266fffff pref] [ 0.489551] pci_bus 0000:09: resource 1 [mem 0x25100000-0x251fffff] [ 0.489554] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff] [ 0.489556] pci_bus 0000:0a: resource 1 [mem 0x26700000-0x267fffff] [ 0.489559] pci_bus 0000:0a: resource 2 [mem 0x25000000-0x250fffff 64bit pref] [ 0.489562] pci_bus 0000:80: resource 0 [io 0x1000-0x1fff] [ 0.489565] pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7] [ 0.489567] pci_bus 0000:80: resource 5 [io 0x0d00-0xffff] [ 0.489570] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff] [ 0.489573] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.489575] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.489578] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.489580] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.489583] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.489586] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.489588] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff] [ 0.489591] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.489593] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.489596] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.489599] pci_bus 0000:80: resource 17 [mem 0x000ec000-0x000effff] [ 0.489601] pci_bus 0000:80: resource 18 [mem 0x20000000-0xdfffffff] [ 0.489604] pci_bus 0000:80: resource 19 [mem 0xe1000000-0xffffffff] [ 0.489720] NET: Registered protocol family 2 [ 0.490001] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.490035] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.490082] TCP: Hash tables configured (established 4096 bind 4096) [ 0.490137] TCP: reno registered [ 0.490142] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.490152] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.490316] NET: Registered protocol family 1 [ 0.490332] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.712370] pci 0000:01:05.0: Boot video device [ 0.712396] PCI: CLS 64 bytes, default 64 [ 0.712480] Unpacking initramfs... [ 1.084945] Freeing initrd memory: 14576K (ffff880015d1c000 - ffff880016b58000) [ 1.085057] Simple Boot Flag at 0x44 set to 0x1 [ 1.085282] microcode: CPU0: patch_level=0x02000057 [ 1.085289] microcode: CPU1: patch_level=0x02000057 [ 1.085382] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.085874] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.086020] audit: initializing netlink subsys (disabled) [ 1.086057] audit: type=2000 audit(1400769459.084:1): initialized [ 1.101225] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.101528] VFS: Disk quotas dquot_6.5.2 [ 1.101597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.101720] msgmni has been set to 728 [ 1.102333] alg: No test for stdrng (krng) [ 1.102369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.102419] io scheduler noop registered [ 1.102421] io scheduler deadline registered [ 1.102442] io scheduler cfq registered (default) [ 1.102764] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 1.102950] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 1.103124] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X [ 1.103295] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X [ 1.103400] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.103424] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.103535] GHES: HEST is not enabled! [ 1.103673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.104439] Linux agpgart interface v0.103 [ 1.104604] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.139234] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.139243] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.139480] mousedev: PS/2 mouse device common for all mice [ 1.142058] rtc_cmos 00:03: RTC can wake from S4 [ 1.142264] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.142340] rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.142359] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 1.142361] AMD IOMMUv2 functionality not available on this system [ 1.142549] TCP: cubic registered [ 1.142644] NET: Registered protocol family 10 [ 1.143131] mip6: Mobile IPv6 [ 1.143136] NET: Registered protocol family 17 [ 1.143152] mpls_gso: MPLS GSO support [ 1.143581] registered taskstats version 1 [ 1.144334] rtc_cmos 00:03: setting system clock to 2014-05-22 14:37:39 UTC (1400769459) [ 1.144422] PM: Hibernation image not present or could not be loaded. [ 1.145917] Freeing unused kernel memory: 1000K (ffffffff818b2000 - ffffffff819ac000) [ 1.145922] Write protecting the kernel read-only data: 8192k [ 1.150299] Freeing unused kernel memory: 1224K (ffff8800014ce000 - ffff880001600000) [ 1.151713] Freeing unused kernel memory: 388K (ffff88000179f000 - ffff880001800000) [ 1.172271] systemd-udevd[57]: starting version 204 [ 1.177720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.214079] SCSI subsystem initialized [ 1.230813] libata version 3.00 loaded. [ 1.231792] ahci 0000:00:11.0: version 3.0 [ 1.232274] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.232279] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.235867] scsi0 : ahci [ 1.236493] scsi1 : ahci [ 1.236619] scsi2 : ahci [ 1.236749] scsi3 : ahci [ 1.236859] scsi4 : ahci [ 1.237003] scsi5 : ahci [ 1.237115] ata1: SATA max UDMA/133 abar m1024@0x26508000 port 0x26508100 irq 22 [ 1.237119] ata2: SATA max UDMA/133 abar m1024@0x26508000 port 0x26508180 irq 22 [ 1.237122] ata3: SATA max UDMA/133 abar m1024@0x26508000 port 0x26508200 irq 22 [ 1.237126] ata4: SATA max UDMA/133 abar m1024@0x26508000 port 0x26508280 irq 22 [ 1.237129] ata5: SATA max UDMA/133 abar m1024@0x26508000 port 0x26508300 irq 22 [ 1.237132] ata6: SATA max UDMA/133 abar m1024@0x26508000 port 0x26508380 irq 22 [ 1.279316] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.279341] r8169 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.279658] r8169 0000:0a:00.0: irq 44 for MSI/MSI-X [ 1.279905] r8169 0000:0a:00.0 eth0: RTL8102e at 0xffffc9000114e000, 00:26:22:9a:2b:2f, XID 04c00000 IRQ 44 [ 1.285533] ACPI: bus type USB registered [ 1.285582] usbcore: registered new interface driver usbfs [ 1.285598] usbcore: registered new interface driver hub [ 1.286259] sdhci: Secure Digital Host Controller Interface driver [ 1.286262] sdhci: Copyright(c) Pierre Ossman [ 1.286602] sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 0) [ 1.287144] mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA [ 1.287171] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0) [ 1.287277] sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface. [ 1.290661] usbcore: registered new device driver usb [ 1.291350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.291543] ehci-pci: EHCI PCI platform driver [ 1.291812] QUIRK: Enable AMD PLL fix [ 1.291856] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.291866] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.291878] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.291880] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.291938] ehci-pci 0000:00:12.2: debug port 1 [ 1.291989] ehci-pci 0000:00:12.2: irq 17, io mem 0x26508500 [ 1.296127] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.296344] ohci-pci: OHCI PCI platform driver [ 1.304363] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.304471] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.304474] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.304477] usb usb1: Product: EHCI Host Controller [ 1.304479] usb usb1: Manufacturer: Linux 3.14-1-amd64 ehci_hcd [ 1.304482] usb usb1: SerialNumber: 0000:00:12.2 [ 1.304717] hub 1-0:1.0: USB hub found [ 1.304730] hub 1-0:1.0: 6 ports detected [ 1.305253] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.305262] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.305268] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.305271] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.305288] ehci-pci 0000:00:13.2: debug port 1 [ 1.305347] ehci-pci 0000:00:13.2: irq 19, io mem 0x26508400 [ 1.316358] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.316437] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.316440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.316443] usb usb2: Product: EHCI Host Controller [ 1.316446] usb usb2: Manufacturer: Linux 3.14-1-amd64 ehci_hcd [ 1.316448] usb usb2: SerialNumber: 0000:00:13.2 [ 1.316648] hub 2-0:1.0: USB hub found [ 1.316663] hub 2-0:1.0: 6 ports detected [ 1.326275] scsi6 : pata_atiixp [ 1.326622] scsi7 : pata_atiixp [ 1.326690] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14 [ 1.326693] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15 [ 1.327202] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.327216] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.327274] ohci-pci 0000:00:12.0: irq 16, io mem 0x26507000 [ 1.368059] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.368065] ACPI: Thermal Zone [TZ01] (41 C) [ 1.384140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.384145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384147] usb usb3: Product: OHCI PCI host controller [ 1.384150] usb usb3: Manufacturer: Linux 3.14-1-amd64 ohci_hcd [ 1.384152] usb usb3: SerialNumber: 0000:00:12.0 [ 1.384397] hub 3-0:1.0: USB hub found [ 1.384409] hub 3-0:1.0: 3 ports detected [ 1.384765] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.384774] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.384816] ohci-pci 0000:00:12.1: irq 16, io mem 0x26506000 [ 1.444092] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.444095] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.444098] usb usb4: Product: OHCI PCI host controller [ 1.444100] usb usb4: Manufacturer: Linux 3.14-1-amd64 ohci_hcd [ 1.444103] usb usb4: SerialNumber: 0000:00:12.1 [ 1.444260] hub 4-0:1.0: USB hub found [ 1.444272] hub 4-0:1.0: 3 ports detected [ 1.444538] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.444546] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.444588] ohci-pci 0000:00:13.0: irq 18, io mem 0x26505000 [ 1.504105] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.504108] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.504110] usb usb5: Product: OHCI PCI host controller [ 1.504113] usb usb5: Manufacturer: Linux 3.14-1-amd64 ohci_hcd [ 1.504115] usb usb5: SerialNumber: 0000:00:13.0 [ 1.504279] hub 5-0:1.0: USB hub found [ 1.504291] hub 5-0:1.0: 3 ports detected [ 1.504603] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.504611] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.504637] ohci-pci 0000:00:13.1: irq 18, io mem 0x26504000 [ 1.556084] ata3: SATA link down (SStatus 0 SControl 300) [ 1.556125] ata2: SATA link down (SStatus 0 SControl 300) [ 1.556158] ata5: SATA link down (SStatus 0 SControl 300) [ 1.556233] ata6: SATA link down (SStatus 0 SControl 300) [ 1.564110] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.564113] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.564115] usb usb6: Product: OHCI PCI host controller [ 1.564118] usb usb6: Manufacturer: Linux 3.14-1-amd64 ohci_hcd [ 1.564120] usb usb6: SerialNumber: 0000:00:13.1 [ 1.564288] hub 6-0:1.0: USB hub found [ 1.564299] hub 6-0:1.0: 3 ports detected [ 1.616090] usb 1-6: new high-speed USB device number 2 using ehci-pci [ 1.728064] ata1: softreset failed (device not ready) [ 1.728112] ata1: applying PMP SRST workaround and retrying [ 1.728135] ata4: softreset failed (device not ready) [ 1.728195] ata4: applying PMP SRST workaround and retrying [ 1.776560] usb 1-6: New USB device found, idVendor=046d, idProduct=09b8 [ 1.776564] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.776566] usb 1-6: Product: HP Webcam [ 1.900079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.900121] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.900512] ata1.00: ATA-8: TOSHIBA MK4058GSX, FF011C, max UDMA/100 [ 1.900516] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.900975] ata1.00: configured for UDMA/100 [ 1.901305] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4058GS FF01 PQ: 0 ANSI: 5 [ 1.919378] ata4.00: ATAPI: Optiarc DVD RW AD-7580S, FH03, max UDMA/100 [ 1.938346] ata4.00: configured for UDMA/100 [ 1.941508] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FH03 PQ: 0 ANSI: 5 [ 1.954243] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.954421] sd 0:0:0:0: [sda] Write Protect is off [ 1.954429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.954485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.964580] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.964585] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.964752] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.967678] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.967735] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.055440] sda: sda1 sda2 sda3 [ 2.056149] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.497741] PM: Starting manual resume from disk [ 2.497749] PM: Hibernation image partition 8:3 present [ 2.497751] PM: Looking for hibernation image. [ 2.522222] PM: Image not found (code -22) [ 2.522224] PM: Hibernation image not present or could not be loaded. [ 2.581515] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.529122] random: nonblocking pool is initialized [ 4.565841] systemd-udevd[378]: starting version 204 [ 5.637668] cfg80211: Calling CRDA to update world regulatory domain [ 5.781026] ACPI: AC Adapter [ACAD] (off-line) [ 5.824193] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 5.824204] ACPI: Power Button [PWRB] [ 5.824312] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 5.824444] ACPI: Lid Switch [LID] [ 5.824505] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.824509] ACPI: Power Button [PWRF] [ 5.853564] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.894041] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0 [ 5.894047] ene_ir: PLL freq = 1406 [ 5.894049] ene_ir: KB3926C detected [ 5.894062] ene_ir: Firmware regs: c0 00 [ 5.894063] ene_ir: Hardware features: [ 5.894065] ene_ir: * Uses GPIO 40 for IR demodulated input [ 5.927322] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 5.927345] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 5.931118] acpi device:04: registered as cooling_device2 [ 5.931222] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6 [ 5.944101] acpi-cpufreq: overriding BIOS provided _PSD data [ 5.959892] wmi: Mapper loaded [ 6.033390] [drm] Initialized drm 1.1.0 20060810 [ 6.132165] Registered IR keymap rc-rc6-mce [ 6.132613] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input5 [ 6.132720] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0 [ 6.144197] ene_ir: driver has been successfully loaded [ 6.251743] IR JVC protocol handler initialized [ 6.251994] IR NEC protocol handler initialized [ 6.252825] IR RC5(x) protocol handler initialized [ 6.253301] IR RC6 protocol handler initialized [ 6.254046] IR Sony protocol handler initialized [ 6.254478] IR SANYO protocol handler initialized [ 6.256110] lirc_dev: IR Remote Control driver registered, major 251 [ 6.257502] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input7 [ 6.257907] IR MCE Keyboard/mouse protocol handler initialized [ 6.258731] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0 [ 6.258736] IR LIRC bridge handler initialized [ 6.402984] ACPI: Battery Slot [BAT0] (battery present) [ 6.531808] hp_accel: laptop model unknown, using default axes configuration [ 6.532469] lis3lv02d: 8 bits sensor found [ 6.565759] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.565956] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 6.572360] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8 [ 6.583491] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 6.583751] sp5100_tco: PCI Revision ID: 0x3a [ 6.583825] sp5100_tco: failed to find MMIO address, giving up. [ 6.614794] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input9 [ 6.619598] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10 [ 6.664423] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 6.664474] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 6.770837] [drm] radeon kernel modesetting enabled. [ 6.818973] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 7.066649] input: HP WMI hotkeys as /devices/virtual/input/input15 [ 7.146481] ath: EEPROM regdomain: 0x69 [ 7.146488] ath: EEPROM indicates we should expect a direct regpair map [ 7.146492] ath: Country alpha2 being used: 00 [ 7.146494] ath: Regpair used: 0x69 [ 7.438261] [drm] initializing kernel modesetting (RS780 0x1002:0x9612 0x103C:0x30FC). [ 7.438345] [drm] register mmio base: 0x26400000 [ 7.438352] [drm] register mmio size: 65536 [ 7.440127] ATOM BIOS: HP_TrinityUMA [ 7.440233] radeon 0000:01:05.0: VRAM: 64M 0x00000000C0000000 - 0x00000000C3FFFFFF (64M used) [ 7.440245] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 7.440260] [drm] Detected VRAM RAM=64M, BAR=64M [ 7.440266] [drm] RAM width 32bits DDR [ 7.440499] [TTM] Zone kernel: Available graphics memory: 187884 kiB [ 7.440506] [TTM] Initializing pool allocator [ 7.440529] [TTM] Initializing DMA pool allocator [ 7.440632] [drm] radeon: 64M of VRAM memory ready [ 7.440639] [drm] radeon: 512M of GTT memory ready. [ 7.440688] [drm] Loading RS780 Microcode [ 7.512414] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.513048] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900011a0000, irq=18 [ 7.516359] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_pfp.bin [ 7.527087] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_me.bin [ 7.536876] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R600_rlc.bin [ 7.536922] [drm] radeon: power management initialized [ 7.536930] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 7.551616] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 7.553534] radeon 0000:01:05.0: WB enabled [ 7.553540] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880014a3fc00 [ 7.553544] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.553546] [drm] Driver supports precise vblank timestamp query. [ 7.553570] [drm] radeon: irq initialized. [ 7.588109] [drm] ring test on 0 succeeded in 0 usecs [ 7.588263] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.588687] [drm] Radeon Display Connectors [ 7.588690] [drm] Connector 0: [ 7.588692] [drm] VGA-1 [ 7.588694] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 7.588696] [drm] Encoders: [ 7.588697] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.588699] [drm] Connector 1: [ 7.588700] [drm] HDMI-A-1 [ 7.588702] [drm] HPD1 [ 7.588704] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 7.588705] [drm] Encoders: [ 7.588707] [drm] DFP1: INTERNAL_UNIPHY [ 7.588708] [drm] Connector 2: [ 7.588709] [drm] LVDS-1 [ 7.588711] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 7.588713] [drm] Encoders: [ 7.588714] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 7.690541] kvm: disabled by bios [ 7.706525] kvm: disabled by bios [ 8.429615] cfg80211: World regulatory domain updated: [ 8.429639] cfg80211: DFS Master region: unset [ 8.429646] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.429656] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.429664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.429671] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 8.429678] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 8.429685] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 8.429692] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 8.436119] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000, board id: 3655, fw id: 509933 [ 8.574859] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14 [ 8.599194] [drm] fb mappable at 0x20141000 [ 8.599201] [drm] vram apper at 0x20000000 [ 8.599202] [drm] size 5324800 [ 8.599204] [drm] fb depth is 24 [ 8.599206] [drm] pitch is 5888 [ 8.599341] fbcon: radeondrmfb (fb0) is primary device [ 8.676782] Console: switching to colour frame buffer device 180x56 [ 8.704836] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 8.704848] radeon 0000:01:05.0: registered panic notifier [ 8.705355] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:05.0 on minor 0 [ 9.346300] media: Linux media interface: v0.10 [ 9.376549] Linux video capture interface: v2.00 [ 9.444257] uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8) [ 9.450810] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input16 [ 9.451133] usbcore: registered new interface driver uvcvideo [ 9.451141] USB Video Class driver (1.1.1) [ 10.676427] Adding 19617788k swap on /dev/sda3. Priority:-1 extents:1 across:19617788k [ 10.770725] EXT4-fs (sda1): re-mounted. Opts: (null) [ 11.163574] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.155494] lp: driver loaded but no devices found [ 12.169838] ppdev: user-space parallel port driver [ 12.247412] fuse init (API version 7.22) [ 12.387992] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.038169] RPC: Registered named UNIX socket transport module. [ 14.038177] RPC: Registered udp transport module. [ 14.038179] RPC: Registered tcp transport module. [ 14.038181] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.083331] FS-Cache: Loaded [ 14.133854] FS-Cache: Netfs 'nfs' registered for caching [ 14.243912] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.882266] vboxdrv: Found 2 processor cores. [ 15.882582] vboxdrv: fAsync=1 offMin=0xda59bfc offMax=0xda59bfc [ 15.882824] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 15.882826] vboxdrv: Successfully loaded version 4.3.10_Debian (interface 0x001a0007). [ 16.174831] vboxpci: IOMMU not found (not registered) [ 16.710315] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17 [ 20.690220] Bluetooth: Core ver 2.18 [ 20.690314] NET: Registered protocol family 31 [ 20.690322] Bluetooth: HCI device and connection manager initialized [ 20.691142] Bluetooth: HCI socket layer initialized [ 20.691157] Bluetooth: L2CAP socket layer initialized [ 20.691198] Bluetooth: SCO socket layer initialized [ 21.401827] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.401843] Bluetooth: BNEP filters: protocol multicast [ 21.401877] Bluetooth: BNEP socket layer initialized [ 21.457745] Bluetooth: RFCOMM TTY layer initialized [ 21.457792] Bluetooth: RFCOMM socket layer initialized [ 21.457839] Bluetooth: RFCOMM ver 1.11 [ 22.650878] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.729275] r8169 0000:0a:00.0 eth0: link down [ 22.729519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.224630] systemd-logind[2928]: New seat seat0. [ 26.242167] systemd-logind[2928]: Watching system buttons on /dev/input/event3 (Power Button) [ 26.242511] systemd-logind[2928]: Watching system buttons on /dev/input/event4 (Video Bus) [ 26.242832] systemd-logind[2928]: Watching system buttons on /dev/input/event1 (Power Button) [ 26.243122] systemd-logind[2928]: Watching system buttons on /dev/input/event2 (Lid Switch) [ 26.245849] systemd-logind[2928]: New session c1 of user lightdm. [ 26.246071] systemd-logind[2928]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display. [ 29.874689] wlan0: authenticate with 3c:ea:4f:ad:0e:99 [ 29.890693] wlan0: send auth to 3c:ea:4f:ad:0e:99 (try 1/3) [ 29.896683] wlan0: authenticated [ 29.897076] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 29.897083] ath9k 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 29.897086] ath9k 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 29.900073] wlan0: associate with 3c:ea:4f:ad:0e:99 (try 1/3) [ 29.902006] wlan0: RX AssocResp from 3c:ea:4f:ad:0e:99 (capab=0x431 status=0 aid=5) [ 29.902072] wlan0: associated [ 29.902124] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 29.902775] cfg80211: Calling CRDA for country: US [ 29.915652] ath: EEPROM regdomain: 0x8348 [ 29.915664] ath: EEPROM indicates we should expect a country code [ 29.915668] ath: doing EEPROM country->regdmn map search [ 29.915672] ath: country maps to regdmn code: 0x3a [ 29.915675] ath: Country alpha2 being used: US [ 29.915678] ath: Regpair used: 0x3a [ 29.915682] ath: regdomain 0x8348 dynamically updated by country IE [ 29.915748] cfg80211: Regulatory domain changed to country: US [ 29.915752] cfg80211: DFS Master region: unset [ 29.915756] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 29.915760] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 29.915764] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 29.915768] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 29.915771] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 29.915775] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 37.744532] systemd-logind[2928]: New session 1 of user mike. [ 37.744915] systemd-logind[2928]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. ********** lspci ********** 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Device 9602 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS780M [Mobility Radeon HD 3200] 01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series] 08:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 08:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 08:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 08:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 09:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) -- Rodney D. Myers <rod_dmyers@fastmail.fm> They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759
Attachment:
signature.asc
Description: PGP signature