Re: Wheezy and parallel port
On Tue 18 Feb 2014 at 11:13:44 +0100, francesco scaglione wrote:
> On a newly installed Wheezy machine I'm desperately trying to
> configure an old HP LaserJet 6P printer connected to the parallel
> port.
[Snip]
> But this is what I get when I launch hplip:
[Snip]
> Enter number 0...2 for connection type (q=quit, enter=usb*) ? 2
>
> Using connection type: par
>
> error: No device selected/specified or that supports this
> functionality.
Reboot with the printer connected and switched on. Then provide us with
the information from:
lsmod | grep par
dmesg | grep par
cat /etc/default/cups
ls -l /dev/lp*
ls -l /dev/parport*
Reply to: