[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Debian Wheezy - HP Pavilion dm1

On 19/10/13 05:44 PM, Gregory Nowak wrote:

On Sat, Oct 19, 2013 at 05:30:41PM -0400, Sureyya Sahin wrote:

Ok, I entered the command as root (not working as a regular user)
and get this edited version (to keep my message short) of
information:


All your edited version tells us is what drive this is. To actually
know what shape the drive is in, we need to see the section that
starts out something like:

"SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:"

Greg
OK, I guess this is the data you are asking for (I trimmed the other part again to make the message short): 

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 15 2 Throughput_Performance 0x0027 252 252 000 Pre-fail Always - 0 3 Spin_Up_Time 0x0023 089 088 025 Pre-fail Always - 3405 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5564 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 252 252 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 11541 10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 098 098 000 Old_age Always - 3020 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3833 183 Runtime_Bad_Block 0x0032 252 252 010 Old_age Always - 0 184 End-to-End_Error 0x0033 252 252 048 Pre-fail Always - 0 186 Unknown_Attribute 0x0032 252 252 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1 188 Command_Timeout 0x0032 252 252 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0002 063 054 040 Old_age Always - 37 (Min/Max 16/46) 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 8504 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 035 035 000 Old_age Always - 656598 194 Temperature_Celsius 0x0002 063 054 000 Old_age Always - 37 (Min/Max 16/46) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 1 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 677 

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run 
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run 
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: