[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: installing virtual guest via ssh on console based remote host



OK, another quick question, completely off subject, but hardly worth a new
thread.

When I look at my previous post through a browser, there are no line breaks,
and one has to scroll across the screen to read it. I don't imagine this is desirable
for most users. Is that a result of my mail client (hotmail)? This message won't
suffer the same issue because I'm manually breaking the lines.

Thanks

----------------------------------------
> From: nelsongreen84@hotmail.com
> To: chris@roaima.co.uk; debian-user@lists.debian.org
> Subject: RE: installing virtual guest via ssh on console based remote host
> Date: Wed, 8 Aug 2012 15:54:45 -0500
>
>
>
>
> ----------------------------------------
> > From: chris-usenet@roaima.co.uk
> > Subject: Re: installing virtual guest via ssh on console based remote host
> > Date: Wed, 8 Aug 2012 20:54:28 +0100
> > To: debian-user@lists.debian.org
> >
> > Nelson Green <nelsongreen84@hotmail.com> wrote:
> > > Installing qemu-kvm and a guest on a remote system is turning into an
> > > absolute nightmare, so I'm once again turning to this list for help.
> >
> > > The host OS is a Centos 6.3 server, without X installed.
> >
> > If it was Debian I could advise you to install the libvirt-bin,
> > bridge-utils, and qemu-kvm packages on the server, with virt-manager as
> > a GUI for the client.
> >
> > Chris
>
> Thanks Chris, and you have no idea how much I wish I was on Debian as I've been a long time (12+ years) user. In fact my local machine is Debian Wheezy, which is why I started this thread here.
>
> I've got some more progress to report if you'll bear with me. First of all, I did install the libvirt-bin and qemu-kvm packages. A bit of history as to why I say this has been a nightmare is because the basic problem has been a lack of straight-forward documentation, but that could be my inability to find it. That being said, every step in this process has involved an error, followed by much time troubleshooting. I don't necessarily mind because finding an answer to a problem involves a learning process, and that is never bad. But in this case I have people depending on me to get them some development boxes.
>
> The first error I got was "Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory" which was accompanied by "error : virNetServerMDNSStart:460 : internal error Failed to create mDNS client: Daemon not running" in the log file. A bit of searching led me to the need to install the avahi package. That then led to an inability to create VMs because of no virtual network. I eventually figured out that I needed to define a network, and to start it. That led to the empty screen problem. I know that the empty screen is the installer output not mapping to the console properly (if that is the correct terminology). I have now solved that issue as well, but not quite the way I thought needed to be done. I was figuring that I could correct the output on the console I started, but apparently I needed to install the virt-viewer package, which creates a window on my local machine and redirects the console to that.
>
> So, I am now installing an OS on my VM. That leaves one final item, but this is really low on the priority list. How do I clean up after those failed initial attempts? I bet I now know enough to restart them, connect to them, and continue the installs there as well, so I will take it from here.
>
> Regards,
> Nelson
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: [🔎] BAY160-W158E82C08D611B29AAC870ADCD0@phx.gbl">http://lists.debian.org/[🔎] BAY160-W158E82C08D611B29AAC870ADCD0@phx.gbl
>
 		 	   		  

Reply to: