Laptop with external display running X11.
Squeeze is installed on an IBM ThinkPad A22m and X11 has worked
with no obvious problems.
Yesterday I connected a PanaSync E70i monitor to the VGA connector
and set BIOS Display to "external". All appeared normal until Xdm
started. There display reverted to the built-in flat screen with
the broken image visible here.
http://members.shaw.ca/peasthope/ThinkPadDisplay.jpg
After rebooting, xdm gives only a black screen. Even after purging
and reinstalling xdm, xserver-org and xserver-common, xdm gives a
black screen. The tails of /var/log/Xorg.0.log and xdm.log are
appended. There is no /etc/X11/xorg.conf.
Similarities between this problem and my attempts to drive a TV
with the composite video signal from a Compaq Armada are noticeable.
My error messages are similar to those reported here.
http://lists.debian.org/debian-user/2011/03/msg00810.html
From, http://lists.debian.org/debian-user/2011/04/msg00165.html
> You should know the drill ...
Yes, for a monitor connected to a desktop machine. Someone please
tell me where to find the drill for a monitor on a laptop.
Appears that the automation of modern X fails with an external
display on a laptop.
* Any idea of where X stores the broken configuration?
* Can X be made to work on the built-in screen again without
reinstalling the system?
* Does anyone have an external display working on a laptop with a
contemporary Debian? Any tips or recipe?
Thanks, ... Peter E.
root@whiterock:/var/log# tail Xorg.0.log
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
root@whiterock:/var/log# tail xdm.log
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: CCE stop -9
(EE) R128(0): R128CCEWaitForIdle: CCE start -9
(EE) R128(0): R128CCEWaitForIdle: CCE idle -9
root@whiterock:/var/log# ls /etc/X11/xorg.conf
ls: cannot access /etc/X11/xorg.conf: No such file or directory
--
New telephone 1 360 639 0202. Old telephone 1 360 450 2132.
bcc: peasthope at shaw.ca
Work "http://carnot.yi.org/".
"http://members.shaw.ca/peasthope/index.html#Itinerary".
Reply to: