Re: Permission Problem with xsane - more
On 09/10/11 01:06, Thomas H. George wrote:
> On Sat, Oct 08, 2011 at 12:09:51PM +1100, Scott Ferguson wrote:
>> On 08/10/11 01:31, Thomas H. George wrote:
>>> On Fri, Oct 07, 2011 at 10:37:04AM +1100, Scott Ferguson wrote:
>>>> On 06/10/11 01:38, Thomas H. George wrote:
>>>>> On Wed, Oct 05, 2011 at 08:57:59AM -0400, Alan Greenberger wrote:
>>>>>> On 2011-10-03, Thomas H. George <lists@tomgeorge.info> wrote:
>>>>>> (...)
<snipped>
>> $ scanimage -d epson2:libusb:001:005
>> and
>> $ scanimage -d epson:libusb:001:005
>
> These commands respond "output is not a file, exiting"
That's good - the command requires other parameters. But that message
indicates that it would work (as you demonstrate further down)
After reboot (or restarting saned) you'd probably find the epson2
parameter would fail.
>
> To add to the confusion xcanimage now works from a command line, no more
> segfault. I have changed nothing since installing iscan. My best guess
> is that commenting out epson in /etc/sane.d/dll.conf may have solved the
> problem but only took effect after the system was rebooted.
Yes. Sorry - I should have suggested "# /etc/init.d/saned restart"
Glad to hear you have it working - it's a nice scanner.
>
>> <snipped>
>>>
>>> Tom
>>>> --
Reply to: