k3b can't burn audio CD, got a few coasters today
Hello.
I have experienced this problem on and off for the past several months.
But today it was the worst case. I am trying to burn a bunch of mp3
files to make an audio CD using k3b. I was able to so do for the first
one after burning only a single coaster. The second one is still not
done and I already have wasted 5 discs in the process.
When I click 'burn' in k3b, it starts to do its stuff but after a while
it errors out. However, the disc still keeps spinning, the drive has its
activity light blinking and I cannot eject the disk. Either I have to
use a paper pin in the optical drive's eject hole (which makes quite a
bit of racket due to the spinning disc) or I have to shut down the
computer, power it off, and start it again.
I have the following installed:
ii k3b 2.0.2-2
ii k3b-data 2.0.2-2
Can somebody suggest what is going on here?
The permissions for my optical drive are:
$ ls -l /dev/dvd*
lrwxrwxrwx 1 root root 3 Jun 11 16:36 /dev/dvd -> sr0
lrwxrwxrwx 1 root root 3 Jun 11 16:36 /dev/dvdrw -> sr0
$ ls -al /dev/sr0
brw-rw----+ 1 root cdrom 11, 0 Jun 11 16:36 /dev/sr0
and do belong to 'cdrom' group.
Thanks.
PS:
The error that k3b gives me is the following:
------------------------------------------
Devices
-----------------------
TSSTcorp CDDVDW SH-S223C SB02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM,
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R
Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM,
DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R
Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R,
RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.6.3 (4.6.3)
QT Version: 4.7.3
Kernel: 2.6.38-2-amd64
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise
RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 396
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CDDVDW SH-S223C '
Revision : 'SB02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 720896 = 704 KB
FIFO size : 12582912 = 12288 KB
Speed set to 8467 KB/s
pregap1: -1
Track 01: audio 45 MB (04:28.02) no preemp swab copy
Track 02: audio 42 MB (04:11.90) no preemp swab copy
Track 03: audio 58 MB (05:50.54) no preemp swab copy
Track 04: audio 41 MB (04:04.22) no preemp swab copy
Track 05: audio 54 MB (05:23.50) no preemp swab copy
Track 06: audio 34 MB (03:24.17) no preemp swab copy
Total size: 276 MB (27:22.38) = 123179 sectors
Lout start: 276 MB (27:24/29) = 123179 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 236666
Starting to write CD/DVD at speed 48.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FE 52 00 01 18 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 34 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 148.975s timeout 200s
/usr/bin/wodim: Could not write Lead-in.
Errno: 5 (Input/output error), prevent/allow medium removal scsi
sendcmd: fatal error
CDB: 1E 00 00 00 00 00
cmd finished after 0.000s timeout 200s
SAO startsec: -12508
Writing lead-in...
write CD-Text data: error after 1159488 bytes
Writing time: 169.988s
/usr/bin/wodim: fifo had 191 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -sao
driveropts=burnfree textfile=/tmp/qt_temp.Yl5941 -useinfo -audio
/tmp/kde-red/k3b_audio_0_01.inf /tmp/kde-red/k3b_audio_0_02.inf
/tmp/kde-red/k3b_audio_0_03.inf /tmp/kde-red/k3b_audio_0_04.inf
/tmp/kde-red/k3b_audio_0_05.inf /tmp/kde-red/k3b_audio_0_06.inf
------------------------------------------
--
Please reply to this list only. I read this list on its corresponding
newsgroup on gmane.org. Replies sent to my email address are just
filtered to a folder in my mailbox and get periodically deleted without
ever having been read.
Reply to: