Re: Installation issues of Debian 5.0.6 "Lenny"
Strange! But this time, when I successfully installed Debian 5.0.6 "Lenny" into my AMD 880G chipset with AMD Athlon II x4 processor, and I loaded the OS in normal mode, it went into the desktop, instead of going into screensaver mode and then freezing.
By the way, I do use the proper installation image, for example, in this installation, I use the amd64 64 bit installation for my 64-bit AMD machine, and I use the i386 for my other 64-bit Intel machine.
However, as a side question, has anyone gotten flash to successfully work in 64 bit OS?
As for my HP notebook, I will have to grab a spare 2.5" hard disk and try again and let you know, as I want to keep my warranty on it by having Windows 7 in my original hard disk.
I will also try FreeBSD as I heard it is a very stable OS and can have a GNOME as a desktop environment.
Thanks and regards,
On Mon, Oct 4, 2010 at 10:28 PM, Klistvud <email@example.com>
Dne, 04. 10. 2010 12:36:20 je David Shum napisal(a):
Or you may just have errors on your DVD ... Also, the installer for x64 won't work on a 32-bit machine (although it would give you a warning about that, instead of going into "kernel panic" mode). You *are* sure you have the right installer for your hardware architecture, right? Specifically: the "ia64" installer is not meant for the usual PC hardware; "i386" and "x86_64"
I install Debian Lenny 5.0 (Update 6) using the CD ISO image downloaded from
debian.org. I burn the image to a DVD, put DVD into my Hewlett Packard
dv6-3030tx notebook (Intel i5-540M on Intel HM55 chipset), then via the HP
BIOS, I boot my DVD drive. I successfully enter into the splash screen
which gives me four options: 1) Install 2) Graphical Install 3) Advanced
Options 4) forgot this one...
When I select 1), the installation process jumps to a black screen that
displays various messages, with the last message being "kernel panic". I
think this may be the issue when you mentioned that since this may not be
the most recent kernel, may be the problem??
It was my understanding that you could boot to a command line interface (virtual terminal in Linux parlance; in Debian it's also called single-user mode). If you can, first surf to http://backports.debian.org/Instructions/ (from another machine) and just follow the instructions. Basically, you add a line (as per the instructions) to the file /etc/apt/sources.list and then issue the command
Although I will try and search this myself, may I have some clues as to how
I can "pull out" this old Linux kernel, and hop into "debian backports" and
plug in a newer Linux kernel? Then try and install.
Once inside aptitude, you select "refresh" to make aptitude register the new software repository "backports" and then proceed to install a new kernel from backports. If you're not familiar with aptitude, you should read a good tutorial on it (or just issue "man aptitude" to read its manual). Also, selecting just the "right" kernel from backports is *not* always a trivial matter IMHO, although they are logically named and numbered. If you're fairly new at this -- or if you can't even boot to a command line interface -- it would perhaps be easier for you to simply install Squeeze instead of Lenny? It's your choice really. One thing I can recommend, if you do try out Squeeze: don't bother with DVDs (I doubt complete DVDs even exist at this point), just download a "netinstall" CD image: if you have a working Internet connection, the installer will pull everything needed off the Internet for you anyway.
No, it only means that besides the Linux kernel, Debian is now capable of running on the FreeBSD kernel too. Haven't tried it yet though, as I have never been able to install any of the BSD OSes myself (couldn't get past the disk "slices" thingy, so I finally gave up).
I will also try and install Debian 6.0 Squeeze and see how that goes. I
read that for Squeeze release, there is one for i386 and AMD based on the
kFreeBSD kernel. So, does this mean that future releases will be based on
Have you tried to boot into single-user mode on this machine?
> I also was able install Debian into this machine I am typing my email on
>> now, which is an ASRock desktop board based on AMD 880G chipset and AMD
>> Athlon II X4 640 processor (quad core), but when I loaded the operating
>> system, the monitor went into screen-saver and froze.
Archive: [🔎] 1286191703.30945.0@compax" target="_blank">http://lists.debian.org/[🔎] 1286191703.30945.0@compax