Re: Upgrade Kernel, Lose External Display
Clean slate, sort of.
I've removed any xorg.conf and am not blacklisting any more.
System docked will not give me a display on the external screen, whether
booted from old kernel or new one.
System undocked works perfectly.
I'm attaching a new dmesg output with the system docked with the new
kernel and the updated xserver-common and xserver-xorg-core. Unless I'm
missing something, it's very much the same story as before. I don't see
where the trouble is. The external monitor and its resolution are
detected. But nothing is displayed on it.
As mentioned before, I filed a bug report. No response to it as of yet.
https://bugs.freedesktop.org/show_bug.cgi?id=28524
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd8000 (usable)
[ 0.000000] BIOS-e820: 000000007ffd8000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 3781a000 - 37fefcb3
[ 0.000000] Allocated new RAMDISK: 00100000 - 008d5cb3
[ 0.000000] Move RAMDISK from 000000003781a000 - 0000000037fefcb2 to 00100000 - 008d5cb2
[ 0.000000] ACPI: RSDP 000fc9b0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 7ffd8790 00040 (v01 DELL D05 27D60314 ASL 00000061)
[ 0.000000] ACPI: FACP 7ffd9400 00074 (v01 DELL D05 27D60314 ASL 00000061)
[ 0.000000] ACPI: DSDT 7ffda000 0355D (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7ffe8800 00040
[ 0.000000] ACPI: APIC 7ffd9c00 00068 (v01 DELL D05 27D60314 ASL 00000047)
[ 0.000000] ACPI: ASF! 7ffd9800 0005B (v16 DELL D05 27D60314 ASL 00000061)
[ 0.000000] ACPI: MCFG 7ffd9bc0 0003E (v16 DELL D05 27D60314 ASL 00000061)
[ 0.000000] ACPI: SSDT 7ffd8be6 002C2 (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
[ 0.000000] ACPI: SSDT 7ffd8a0e 001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 7ffd8813 001FB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca188] BRK ==> [00014c4000 - 00014ca188]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00008d5cb3] NEW RAMDISK ==> [0000100000 - 00008d5cb3]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ffd8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffd8
[ 0.000000] On node 0 totalpages: 524151
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295618 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34136 r0 d23208 u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520055
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8ccd4845-705a-4e92-98e2-7129fb7b9cda ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007ffd8)
[ 0.000000] Memory: 2065384k/2096992k available (2490k kernel code, 30300k reserved, 1318k data, 372k init, 1191784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2128.104 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.20 BogoMIPS (lpj=8512416)
[ 0.004029] Security Framework initialized
[ 0.004037] SELinux: Disabled at boot.
[ 0.004046] Mount-cache hash table entries: 512
[ 0.004207] Initializing cgroup subsys ns
[ 0.004213] Initializing cgroup subsys cpuacct
[ 0.004217] Initializing cgroup subsys devices
[ 0.004219] Initializing cgroup subsys freezer
[ 0.004222] Initializing cgroup subsys net_cls
[ 0.004247] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004249] CPU: L2 cache: 2048K
[ 0.004254] mce: CPU supports 5 MCE banks
[ 0.004265] CPU0: Thermal monitoring enabled (TM1)
[ 0.004275] Performance Events: p6 PMU driver.
[ 0.004282] ... version: 0
[ 0.004283] ... bit width: 32
[ 0.004285] ... generic registers: 2
[ 0.004287] ... value mask: 00000000ffffffff
[ 0.004289] ... max period: 000000007fffffff
[ 0.004290] ... fixed-purpose events: 0
[ 0.004292] ... event mask: 0000000000000003
[ 0.004297] Checking 'hlt' instruction... OK.
[ 0.020348] SMP alternatives: switching to UP code
[ 0.023541] ACPI: Core revision 20090903
[ 0.032061] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072285] CPU0: Intel(R) Pentium(R) M processor 2.13GHz stepping 08
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (4256.20 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.076001] PCI: MCFG area at e0000000 reserved in E820
[ 0.076001] PCI: Using MMCONFIG for extended config space
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.105064] ACPI: SSDT 7ffd87d0 00043 (v01 LMPWR DELLLOM 00001001 INTL 20030522)
[ 0.106318] ACPI: Interpreter enabled
[ 0.106330] ACPI: (supports S0 S3 S4 S5)
[ 0.106348] ACPI: Using IOAPIC for interrupt routing
[ 0.148070] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.161389] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.161485] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.161488] pci 0000:00:01.0: PME# disabled
[ 0.161597] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.161602] pci 0000:00:1c.0: PME# disabled
[ 0.161665] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[ 0.161724] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
[ 0.161782] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
[ 0.161840] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
[ 0.161903] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.161960] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.161965] pci 0000:00:1d.7: PME# disabled
[ 0.162067] pci 0000:00:1e.2: reg 10 io port: [0xed00-0xedff]
[ 0.162075] pci 0000:00:1e.2: reg 14 io port: [0xec40-0xec7f]
[ 0.162083] pci 0000:00:1e.2: reg 18 32bit mmio: [0xdffffe00-0xdfffffff]
[ 0.162091] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xdffffd00-0xdffffdff]
[ 0.162126] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.162131] pci 0000:00:1e.2: PME# disabled
[ 0.162166] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
[ 0.162174] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
[ 0.162220] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.162224] pci 0000:00:1e.3: PME# disabled
[ 0.162310] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.162317] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.162321] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.162325] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.162367] pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
[ 0.162375] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
[ 0.162382] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
[ 0.162389] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
[ 0.162397] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
[ 0.162429] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.162434] pci 0000:00:1f.2: PME# disabled
[ 0.162470] pci 0000:01:00.0: reg 10 32bit mmio: [0xdd000000-0xddffffff]
[ 0.162479] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.162487] pci 0000:01:00.0: reg 1c 64bit mmio: [0xde000000-0xdeffffff]
[ 0.162496] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfe00000-0xdfe1ffff]
[ 0.162525] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.162587] pci 0000:00:01.0: bridge 32bit mmio: [0xdd000000-0xdfefffff]
[ 0.162591] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.162668] pci 0000:02:00.0: reg 10 64bit mmio: [0xdcff0000-0xdcffffff]
[ 0.162757] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.162763] pci 0000:02:00.0: PME# disabled
[ 0.162800] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.162894] pci 0000:00:1c.0: bridge 32bit mmio: [0xdcf00000-0xdcffffff]
[ 0.162947] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.162973] pci 0000:03:01.0: supports D1 D2
[ 0.162976] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162981] pci 0000:03:01.0: PME# disabled
[ 0.163033] pci 0000:03:01.5: reg 10 32bit mmio: [0xdcefd000-0xdcefdfff]
[ 0.163043] pci 0000:03:01.5: reg 14 32bit mmio: [0xdcefe000-0xdcefefff]
[ 0.163100] pci 0000:03:01.5: supports D1 D2
[ 0.163103] pci 0000:03:01.5: PME# supported from D0 D1 D2 D3hot
[ 0.163108] pci 0000:03:01.5: PME# disabled
[ 0.163165] pci 0000:03:03.0: reg 10 32bit mmio: [0xdceff000-0xdcefffff]
[ 0.163231] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
[ 0.163236] pci 0000:03:03.0: PME# disabled
[ 0.163297] pci 0000:00:1e.0: transparent bridge
[ 0.163305] pci 0000:00:1e.0: bridge 32bit mmio: [0xdce00000-0xdcefffff]
[ 0.163346] pci_bus 0000:00: on NUMA node 0
[ 0.163350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.163583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.163633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.180202] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.180306] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.180407] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.180509] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.180597] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.180688] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.180779] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.180878] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.180881] vgaarb: loaded
[ 0.180943] PCI: Using ACPI for IRQ routing
[ 0.184192] hpet clockevent registered
[ 0.184195] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.184202] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.184207] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188016] Switching to clocksource tsc
[ 0.189273] pnp: PnP ACPI init
[ 0.189283] ACPI: bus type pnp registered
[ 0.213567] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.213571] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.213629] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.213633] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.213636] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.250444] pnp: PnP ACPI: found 14 devices
[ 0.250446] ACPI: ACPI bus type pnp unregistered
[ 0.250449] PnPBIOS: Disabled by ACPI PNP
[ 0.250459] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.250462] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.250465] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.250468] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.250471] system 00:00: iomem range 0x100000-0x7ffd7fff could not be reserved
[ 0.250475] system 00:00: iomem range 0x7ffd8000-0x7fffffff has been reserved
[ 0.250478] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
[ 0.250481] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
[ 0.250484] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.250488] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.250491] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.250494] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
[ 0.250497] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
[ 0.250500] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
[ 0.250503] system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved
[ 0.250506] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
[ 0.250510] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.250516] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.250521] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.250524] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.250528] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.250531] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[ 0.250537] system 00:08: ioport range 0x900-0x90f has been reserved
[ 0.250540] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.250543] system 00:08: ioport range 0x920-0x92f has been reserved
[ 0.250546] system 00:08: ioport range 0x93c-0x93f has been reserved
[ 0.250552] system 00:08: ioport range 0x940-0x97f has been reserved
[ 0.250558] system 00:0d: ioport range 0x930-0x93b has been reserved
[ 0.285257] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.285260] pci 0000:00:01.0: IO window: disabled
[ 0.285264] pci 0000:00:01.0: MEM window: 0xdd000000-0xdfefffff
[ 0.285267] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff
[ 0.285272] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.285276] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.285282] pci 0000:00:1c.0: MEM window: 0xdcf00000-0xdcffffff
[ 0.285287] pci 0000:00:1c.0: PREFETCH window: 0x00000084000000-0x000000841fffff
[ 0.285301] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[ 0.285303] pci 0000:03:01.0: IO window: 0x003000-0x0030ff
[ 0.285309] pci 0000:03:01.0: IO window: 0x003400-0x0034ff
[ 0.285314] pci 0000:03:01.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.285320] pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff
[ 0.285325] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.285329] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.285335] pci 0000:00:1e.0: MEM window: 0xdce00000-0xdcefffff
[ 0.285340] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.285357] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.285361] pci 0000:00:01.0: setting latency timer to 64
[ 0.285370] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.285375] pci 0000:00:1c.0: setting latency timer to 64
[ 0.285383] pci 0000:00:1e.0: setting latency timer to 64
[ 0.285394] pci 0000:03:01.0: enabling device (0000 -> 0003)
[ 0.285399] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.285408] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.285411] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.285413] pci_bus 0000:01: resource 1 mem: [0xdd000000-0xdfefffff]
[ 0.285416] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.285419] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.285422] pci_bus 0000:02: resource 1 mem: [0xdcf00000-0xdcffffff]
[ 0.285424] pci_bus 0000:02: resource 2 pref mem [0x84000000-0x841fffff]
[ 0.285427] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.285430] pci_bus 0000:03: resource 1 mem: [0xdce00000-0xdcefffff]
[ 0.285432] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.285435] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.285438] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.285440] pci_bus 0000:04: resource 0 io: [0x3000-0x30ff]
[ 0.285443] pci_bus 0000:04: resource 1 io: [0x3400-0x34ff]
[ 0.285446] pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.285448] pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.285477] NET: Registered protocol family 2
[ 0.285556] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.285847] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.286790] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.287385] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.287389] TCP reno registered
[ 0.287506] NET: Registered protocol family 1
[ 0.287637] pci 0000:01:00.0: Boot video device
[ 0.287703] Unpacking initramfs...
[ 0.517970] Freeing initrd memory: 8023k freed
[ 0.524607] audit: initializing netlink socket (disabled)
[ 0.524625] type=2000 audit(1276633182.523:1): initialized
[ 0.524868] highmem bounce pool size: 64 pages
[ 0.524873] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.526213] VFS: Disk quotas dquot_6.5.2
[ 0.526272] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.526346] msgmni has been set to 1723
[ 0.526542] alg: No test for stdrng (krng)
[ 0.526593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.526596] io scheduler noop registered
[ 0.526598] io scheduler anticipatory registered
[ 0.526600] io scheduler deadline registered
[ 0.526633] io scheduler cfq registered (default)
[ 0.526743] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.526750] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.526864] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.526874] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.527034] isapnp: Scanning for PnP cards...
[ 0.880725] isapnp: No Plug & Play device found
[ 0.881904] Linux agpgart interface v0.103
[ 0.882020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.882135] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.882500] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.882587] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.882594] serial 0000:00:1e.3: PCI INT B disabled
[ 0.882668] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.887104] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.887111] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.887194] mice: PS/2 mouse device common for all mice
[ 0.887276] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.887306] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.887317] cpuidle: using governor ladder
[ 0.887319] cpuidle: using governor menu
[ 0.887324] No iBFT detected.
[ 0.887629] TCP cubic registered
[ 0.887777] NET: Registered protocol family 10
[ 0.888174] lo: Disabled Privacy Extensions
[ 0.888436] Mobile IPv6
[ 0.888439] NET: Registered protocol family 17
[ 0.888455] Using IPI No-Shortcut mode
[ 0.888516] PM: Resume from disk failed.
[ 0.888522] registered taskstats version 1
[ 0.888870] rtc_cmos 00:06: setting system clock to 2010-06-15 20:19:43 UTC (1276633183)
[ 0.888896] Initalizing network drop monitor service
[ 0.888922] Freeing unused kernel memory: 372k freed
[ 0.889137] Write protecting the kernel text: 2492k
[ 0.889156] Write protecting the kernel read-only data: 916k
[ 0.891285] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.901958] udev: starting version 157
[ 1.100538] usbcore: registered new interface driver usbfs
[ 1.100656] usbcore: registered new interface driver hub
[ 1.100768] usbcore: registered new device driver usb
[ 1.106787] SCSI subsystem initialized
[ 1.132637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.132674] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.132690] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.132693] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.132713] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.132741] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.136633] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.136651] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 1.149923] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.149930] ACPI: Thermal Zone [THM] (45 C)
[ 1.150350] tg3.c:v3.102 (September 1, 2009)
[ 1.150369] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.150377] tg3 0000:02:00.0: setting latency timer to 64
[ 1.150466] libata version 3.00 loaded.
[ 1.153549] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.153588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.153591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.153594] usb usb1: Product: EHCI Host Controller
[ 1.153596] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.153598] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.153670] usb usb1: configuration #1 chosen from 1 choice
[ 1.153699] hub 1-0:1.0: USB hub found
[ 1.153707] hub 1-0:1.0: 8 ports detected
[ 1.156465] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.156506] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.156514] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.156518] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.156525] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.156553] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 1.156586] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.156588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156591] usb usb2: Product: UHCI Host Controller
[ 1.156593] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.156595] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.156972] usb usb2: configuration #1 chosen from 1 choice
[ 1.157034] hub 2-0:1.0: USB hub found
[ 1.157040] hub 2-0:1.0: 2 ports detected
[ 1.157086] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.157092] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.157096] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.157102] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.157137] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 1.157168] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.157170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157173] usb usb3: Product: UHCI Host Controller
[ 1.157175] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.157177] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.157276] usb usb3: configuration #1 chosen from 1 choice
[ 1.157331] hub 3-0:1.0: USB hub found
[ 1.157338] hub 3-0:1.0: 2 ports detected
[ 1.157379] ata_piix 0000:00:1f.2: version 2.13
[ 1.157391] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.157396] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.169153] eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:14:22:f5:4a:56
[ 1.169156] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.169159] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.169162] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.312016] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.312174] scsi0 : ata_piix
[ 1.312298] scsi1 : ata_piix
[ 1.313987] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.313990] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.314085] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.314094] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.314098] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.314108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.314143] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 1.314183] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.314186] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.314188] usb usb4: Product: UHCI Host Controller
[ 1.314191] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.314193] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.314259] usb usb4: configuration #1 chosen from 1 choice
[ 1.314287] hub 4-0:1.0: USB hub found
[ 1.314294] hub 4-0:1.0: 2 ports detected
[ 1.314346] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.314354] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.314357] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.314364] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.314396] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 1.314426] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.314428] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.314431] usb usb5: Product: UHCI Host Controller
[ 1.314433] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.314435] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.314484] usb usb5: configuration #1 chosen from 1 choice
[ 1.314509] hub 5-0:1.0: USB hub found
[ 1.314515] hub 5-0:1.0: 2 ports detected
[ 1.464016] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.476633] ata2.00: ATA-6: FUJITSU MHV2080AH, 00000096, max UDMA/100
[ 1.476636] ata2.00: 156301488 sectors, multi 8: LBA
[ 1.492783] ata2.00: configured for UDMA/100
[ 1.492797] ata1.00: ATA-6: FUJITSU MHT2060AH, 006C, max UDMA/100
[ 1.492800] ata1.00: 117210240 sectors, multi 8: LBA
[ 1.492812] ata1.00: applying bridge limits
[ 1.524571] ata1.00: configured for UDMA/100
[ 1.524683] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 006C PQ: 0 ANSI: 5
[ 1.524930] scsi 1:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
[ 1.541604] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.541654] sd 0:0:0:0: [sda] Write Protect is off
[ 1.541657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.541678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.541799] sda:
[ 1.541948] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.541995] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.541997] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.542018] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.542125] sdb: sda1 sda2 <
[ 1.596331] usb 1-2: New USB device found, idVendor=413c, idProduct=0058
[ 1.596334] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.596403] usb 1-2: configuration #1 chosen from 1 choice
[ 1.596619] hub 1-2:1.0: USB hub found
[ 1.596703] hub 1-2:1.0: 4 ports detected
[ 1.603398] sda5 >
[ 1.603825] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.617631] sdb1
[ 1.617937] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.812170] PM: Starting manual resume from disk
[ 1.812173] PM: Resume from partition 8:5
[ 1.812175] PM: Checking hibernation image.
[ 1.812391] PM: Error -22 checking image file
[ 1.812392] PM: Resume from disk failed.
[ 1.868094] usb 1-2.1: new high speed USB device using ehci_hcd and address 3
[ 1.870358] kjournald starting. Commit interval 5 seconds
[ 1.870364] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.960836] usb 1-2.1: New USB device found, idVendor=054c, idProduct=02d1
[ 1.960840] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.960842] usb 1-2.1: Product: DRX-830U
[ 1.960844] usb 1-2.1: Manufacturer: Sony
[ 1.960846] usb 1-2.1: SerialNumber: DRX830UMP0000004D6D
[ 1.960944] usb 1-2.1: configuration #1 chosen from 1 choice
[ 2.032101] usb 1-2.3: new full speed USB device using ehci_hcd and address 4
[ 2.125587] usb 1-2.3: New USB device found, idVendor=03f0, idProduct=1017
[ 2.125590] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.125593] usb 1-2.3: Product: hp LaserJet 1300
[ 2.125595] usb 1-2.3: Manufacturer: Hewlett-Packard
[ 2.125597] usb 1-2.3: SerialNumber: 00CNBB056878
[ 2.125675] usb 1-2.3: configuration #1 chosen from 1 choice
[ 2.196093] usb 1-2.4: new high speed USB device using ehci_hcd and address 5
[ 2.288342] usb 1-2.4: New USB device found, idVendor=0424, idProduct=a700
[ 2.288345] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.288400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 2.288494] hub 1-2.4:1.0: USB hub found
[ 2.288589] hub 1-2.4:1.0: 4 ports detected
[ 2.716103] usb 1-2.4.3: new low speed USB device using ehci_hcd and address 6
[ 2.812723] usb 1-2.4.3: New USB device found, idVendor=045e, idProduct=0040
[ 2.812726] usb 1-2.4.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.812729] usb 1-2.4.3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.812732] usb 1-2.4.3: Manufacturer: Microsoft
[ 2.812805] usb 1-2.4.3: configuration #1 chosen from 1 choice
[ 2.900106] usb 1-2.4.4: new low speed USB device using ehci_hcd and address 7
[ 3.013976] usb 1-2.4.4: New USB device found, idVendor=413c, idProduct=2003
[ 3.013979] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.013982] usb 1-2.4.4: Product: Dell USB Keyboard
[ 3.013984] usb 1-2.4.4: Manufacturer: Dell
[ 3.014043] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 3.795419] udev: starting version 157
[ 4.380519] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input1
[ 4.380601] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.420096] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.309236] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.320115] Marking TSC unstable due to TSC halts in idle
[ 5.320209] processor LNXCPU:00: registered as cooling_device0
[ 5.322797] Switching to clocksource hpet
[ 5.408872] Initializing USB Mass Storage driver...
[ 5.409195] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.412732] usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1017
[ 5.412750] usbcore: registered new interface driver usblp
[ 5.413146] usbcore: registered new interface driver usb-storage
[ 5.413148] USB Mass Storage support registered.
[ 5.413274] usb-storage: device found at 3
[ 5.413276] usb-storage: waiting for device to settle before scanning
[ 5.416509] parport_pc 00:0c: reported by Plug and Play ACPI
[ 5.416580] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.508778] lib80211: common routines for IEEE802.11 drivers
[ 5.508781] lib80211_crypt: registered algorithm 'NULL'
[ 5.540050] usbcore: registered new interface driver hiddev
[ 5.542453] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/input/input3
[ 5.542630] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-2.4.3/input0
[ 5.546885] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4.4/1-2.4.4:1.0/input/input4
[ 5.547014] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-2.4.4/input0
[ 5.547034] usbcore: registered new interface driver usbhid
[ 5.547169] usbhid: v2.6:USB HID core driver
[ 5.577237] ACPI: Battery Slot [BAT0] (battery present)
[ 5.582120] ACPI: AC Adapter [AC] (on-line)
[ 5.582201] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 5.582782] ACPI: Lid Switch [LID]
[ 5.583374] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.588717] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 5.588772] ACPI: Power Button [PBTN]
[ 5.588823] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 5.588846] ACPI: Sleep Button [SBTN]
[ 5.692890] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 5.692893] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 5.704986] intel_rng: FWH not detected
[ 6.314606] [drm] Initialized drm 1.1.0 20060810
[ 6.381103] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 6.381106] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 6.381175] ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.381231] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 6.381263] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
[ 6.475179] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[ 6.475229] ipw2200: Unable to load firmware: -2
[ 6.475273] ipw2200: failed to register network device
[ 6.475485] ipw2200 0000:03:03.0: PCI INT A disabled
[ 6.475497] ipw2200: probe of 0000:03:03.0 failed with error -5
[ 6.475607] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0186]
[ 6.475629] yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.475631] yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI
[ 6.475637] yenta_cardbus 0000:03:01.0: TI: mfunc 0x01111122, devctl 0x64
[ 6.705328] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0c78, PCI irq 19
[ 6.705333] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 6.705337] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 6.705347] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 6.705350] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 6.705559] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdce00000 - 0xdcefffff
[ 6.705563] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 6.930621] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.930627] nouveau 0000:01:00.0: setting latency timer to 64
[ 6.933936] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 6.934159] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x042c00a1)
[ 6.934454] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 6.934469] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 6.934472] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 7.035774] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 7.035778] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 7.035781] [drm] nouveau 0000:01:00.0: Bios version 05.41.02.29
[ 7.035785] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 7.035788] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 7.035792] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 6 2
[ 7.035796] [drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41 idx 0 tag 0xff
[ 7.035799] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 7.035802] [drm] nouveau 0000:01:00.0: 2: 0x00000231: type 0x31 idx 2 tag 0xff
[ 7.035804] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
[ 7.035807] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 3 tag 0xff
[ 7.035810] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000004
[ 7.035814] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01011300 00000028
[ 7.035817] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01522312 00000100
[ 7.035820] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020333f1 0002c070
[ 7.035827] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEC4B
[ 7.036047] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF118
[ 7.084228] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF5B9
[ 7.084251] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF730
[ 7.108023] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF7F4
[ 7.121145] [TTM] Zone kernel: Available graphics memory: 441456 kiB.
[ 7.121147] [TTM] Zone highmem: Available graphics memory: 1037348 kiB.
[ 7.121157] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 7.122946] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 7.123762] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 7.125511] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 7.125523] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 7.125529] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 7.233174] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 7.319222] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.320895] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 7.321580] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.322165] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.322894] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 7.339569] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 7.339658] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 7.339724] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 7.340937] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 7.340942] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 7.340946] [drm] nouveau 0000:01:00.0: 0xE146: Parsing digital output script table
[ 7.340957] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 7.340961] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 7.340963] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 7.428277] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.428310] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 7.564168] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo f657aa00
[ 7.575820] [drm] nouveau 0000:01:00.0: Output DVI-D-1 is running on CRTC 0 using output A
[ 7.575824] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)
[ 7.575827] [drm] nouveau 0000:01:00.0: Output DVI-D-1 is running on CRTC 0 using output A
[ 7.577124] Console: switching to colour frame buffer device 210x65
[ 7.578412] fb0: nouveaufb frame buffer device
[ 7.578413] registered panic notifier
[ 7.578418] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 8.256031] intel8x0_measure_ac97_clock: measured 55475 usecs (2673 samples)
[ 8.256034] intel8x0: clocking to 48000
[ 8.256893] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.256908] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[ 8.360072] MC'97 1 converters and GPIO not ready (0xff00)
[ 9.336549] Adding 2441840k swap on /dev/sda5. Priority:-1 extents:1 across:2441840k
[ 9.580336] EXT3 FS on sda1, internal journal
[ 9.692909] loop: module loaded
[ 10.042914] kjournald starting. Commit interval 5 seconds
[ 10.042921] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 10.043353] EXT3 FS on sdb1, internal journal
[ 10.043358] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.412273] usb-storage: device scan complete
[ 10.412928] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-830A SS25 PQ: 0 ANSI: 0
[ 10.607526] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.607529] Uniform CD-ROM driver Revision: 3.20
[ 10.607794] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 10.688276] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.688601] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 10.689010] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 11.344127] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.560238] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.560688] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 11.560691] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 11.560693] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 11.696437] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.225516] fuse init (API version 7.13)
[ 13.303443] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 13.303446] tg3: eth0: Flow control is on for TX and on for RX.
[ 13.303642] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.420207] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 16.038032] apm: BIOS not found.
[ 18.210523] Bluetooth: Core ver 2.15
[ 18.210565] NET: Registered protocol family 31
[ 18.210567] Bluetooth: HCI device and connection manager initialized
[ 18.210570] Bluetooth: HCI socket layer initialized
[ 18.461607] Bluetooth: L2CAP ver 2.14
[ 18.461609] Bluetooth: L2CAP socket layer initialized
[ 18.515359] Bluetooth: RFCOMM TTY layer initialized
[ 18.515363] Bluetooth: RFCOMM socket layer initialized
[ 18.515364] Bluetooth: RFCOMM ver 1.11
[ 18.629221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.629224] Bluetooth: BNEP filters: protocol multicast
[ 18.699449] Bridge firewalling registered
[ 18.991754] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.991756] Bluetooth: SCO socket layer initialized
[ 20.481437] lp0: using parport0 (interrupt-driven).
[ 20.526260] ppdev: user-space parallel port driver
[ 21.111755] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 21.113648] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 24.088021] eth0: no IPv6 routers present
[ 39.664454] tg3 0000:02:00.0: PME# enabled
[ 39.664481] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 39.686062] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[ 39.686075] tg3 0000:02:00.0: PME# disabled
[ 39.731765] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.792463] tg3 0000:02:00.0: PME# enabled
[ 39.792488] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 39.816629] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[ 39.816637] tg3 0000:02:00.0: PME# disabled
[ 39.863557] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.449614] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 41.449621] tg3: eth0: Flow control is on for TX and on for RX.
[ 41.450111] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 52.432028] eth0: no IPv6 routers present
Reply to: