Re: how to control tty to external monitor or local lcd
On Wed, Apr 7, 2010 at 1:03 AM, Stephen Powell <firstname.lastname@example.org>
I'm not familiar with your laptop, but most laptops have a way to switch
On Tue, 6 Apr 2010 10:17:53 -0400 (EDT), Alexander Samad wrote:
> I have a hp mini, which has a 0:02.0 VGA compatible controller: Intel
> Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
> I would like to know how I can force ttyX to go to the external monitor and
> then back to the local lcd.
> Also have a problem that if I have my X going to an external monitor and
> then suspend and re awaken with the laptop not connected to an external
> monitor I can't get my X session back I have to restart gdm.
back and forth between the internal display and an external display via
the internal keyboard. On the IBM ThinkPad machines that I use (a 600
and a 390E) it is Fn+F7. Consult your hardware documentation.
yep fn + f2 - doesn't always work
Switching between the two is much easier if your external monitor
is an LCD monitor. The internal display probably runs at 60 Hz vertical
refresh. The external monitor, if it is an LCD display, will probably
want to run at 60 Hz vertical refresh also. An external CRT monitor,
however, will probably have noticeable flicker at 60 Hz vertical refresh.
It will want to use a higher vertical refresh rate: at least 72 Hz.
wouldn't have thought it would be a problem, I can place X across to different monitors ? But you might be right :)
But I really wanted to be able to do it from the cmd line !
Switching back and forth dynamically between internal and external monitors
is tricky if they want to use different resolutions and refresh rates.
It often won't work.
Archive: 1338000668.1398081270566209388.JavaMail.email@example.com" target="_blank">http://lists.debian.org/1338000668.1398081270566209388.JavaMail.firstname.lastname@example.org