[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Sound - none happening.......



On Sun, 31 Jan 2010 11:23:01 +0100 Florian Kulzer
<florian.kulzer+debian@icfo.es> shared this with us all:

>On Sun, Jan 31, 2010 at 15:04:10 +1100, Charlie wrote:
>> 
>> Hello,
>> 
>> Always had trouble getting sound to work with Debian, never had it
>> working with Squeeze, though I might see if I could get it going
>> again:
>> 
>> Acer 3614WLCi laptop
>> 
>> $ lspci | grep -i audio
>> 00:1e.2 Multimedia audio controller: Intel Corporation
>> 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
>
>[ snip: it seems that your system has loaded the relevant modules ]
>
>> $ cat   /proc/asound/cards
>>  0 [ICH6           ]: ICH4 - Intel ICH6
>>                       Intel ICH6 with ALC655 at irq 21
>>  1 [pcsp           ]: PC-Speaker - pcsp
>>                       Internal PC-Speaker at port 0x61
>>  2 [Modem          ]: ICH-MODEM - Intel ICH6 Modem
>>                       Intel ICH6 Modem at irq 21
>
>That looks good, too; the right card has number 0.
>
>[...]
>
>> The following doesn't work:
>> 
>> # udevtrigger --verbose --subsystem-match=sound
>> -su: udevtrigger: command not found
>
>For the current version of udev, this command should be:
>
>  udevadm trigger --verbose --subsystem-match=sound
>
>I do not think that it will make any difference in your case, though.
>
>[...]
>
>> Possibly someone could point me further, or see what I'm missing.
>> I've been without any sound so long, I don't really miss it, but it
>> would just be nice to have my Squeeze system working as it should.
>
>Everything seems to be OK; do you get an error message if you run
>
>  speaker-test -t sine -c 2
>
>?

Thanks Florian,

speaker-test -t sine -c 2

speaker-test 1.0.21

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
 0 - Front Left
 1 - Front Right
Time per period = 5.822096

This goes on until I kill it but no sound.

[shrug] Don't know if that's what you expected?

Charlie
-- 
Registered Linux User:- 329524
.....................................................

The language of friendship is not words but meanings. .....Henry David
Thoreau

.....................................................

Debian GNU/Linux - just the best way to create magic


Reply to: