On Fri, Nov 27, 2009 at 2:41 AM, Justin The Cynical
<cynical@penguinness.org> wrote:
Yuriy Kuznetsov wrote:
In short:
Dell Power Edge 2970; 6X3" HDDs: 2-RAID1, 4-RAID5
Etch on a 2950 at work.
Sounds pretty close so it's promising ;-)
Installed latest Debian on RAID1, which is VD-00. Installation went through
without any issue.
After installation system can not boot. Checked BIOS and there are only 3
options to boot from: CD-ROM, NIC, Drive C(I'm not sure where drive C came
from???).
The "C" drive is from Dell (part of the OS/diagnostic stuff they include). You should be able to delete that if you like as, IIRC, the tools are available via a bootable CD that is included with the machine. I believe the ISO is also available for download,
I'm fine to leave this as long as it won't course any issue with booting.
In the RAID configuration utility VD-00(2 HDD in RAID1)is set as boot device
but it's still can not see the boot sector.
Is it something wrong with the system or did I need to set some settings on
software level?
PERC card, yes?
Yes, you are right. There is PERC 6/i installed.
Check that the megaraid_sas driver is loading. When I installed Etch, I had to rebuild the initrd with that module after the initial install.
Could advice on how I can check this please? I reckon that this is my problem as when system is trying to boot - it looks like it's not even reach as far as HDDs at all.
Also, do you have a DRAC in that box? If so, check the /dev/sd* list in the fstab and menu.lst files. The DRAC has a 'virtual drive' that is presented to the kernel as a USB device and in my case, was enumerated before the RAID card, throwing off the drive list (/dev/sda* became /dev/sdb* or some such thing)
Is it about Remote Access Configuration? Yes, it's present on the system alright.
In my case /dev/sda is RAID1 and /dev/sdb is RAID5
.
PE2950
PERC RAID card
one RAID 1 (/dev/sda)
one RAID 10 (/dev/sdb)
~$ mount
/dev/sda3 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/sdb1 on /mnt/vm_storage type ext3 (rw,errors=remount-ro)
~$ fdisk /dev/sda -l
Disk /dev/sda: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 28 224878+ de Dell Utility
/dev/sda2 29 290 2104515 c W95 FAT32 (LBA)
/dev/sda3 * 291 8490 65866500 83 Linux
/dev/sda4 8491 8844 2843505 5 Extended
/dev/sda5 8491 8844 2843473+ 82 Linux swap /