[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: No audio after recent upgrade



On Wednesday 08 July 2009, Russ Cook wrote:
> Andrei Popescu wrote:
> > On Wed,08.Jul.09, 08:03:45, Russ Cook wrote:
> >
> > [snip upgrade from 2.6.29 to 2.6.30]
> >
> >
> > It's not clear to me, are you running pulseaudio *now* or not?
>
> Pulseaudio IS installed now.
>
> >> I have attached the output of lsmod, showing which modules are currently
> >> loaded. I am at a loss as to how to troubleshoot this audio problem,
> >> and would greatly appreciate any suggestions and pointers.
> >
> > You lsmod looks good, assuming snd_intel8x0 is the correct module (you
> > haven't said anything about your audio chip).
> >
> > What do you get if you try
> >
> > speaker-test -c2 -t wav -l1
> >
> > ?
>
> No discernible audio.
> Text output is
> speaker-test 1.0.20
>
> Playback device is default
> Stream parameters are 48000Hz, S16_LE, 2 channels
> WAV file(s)
> Rate set to 48000Hz (requested 48000Hz)
> Buffer size range from 2048 to 16384
> Period size range from 1024 to 1024
> Using max buffer size 16384
> Periods = 4
> was set period_size = 1024
> was set buffer_size = 16384
> 0 - Front Left
> 1 - Front Right
> Time per period = 2.685331
>
> > Please also post the output of
> >
> > cat /proc/asound/cards
>
> 0 [CK804 ]: NFORCE - NVidia CK804
> NVidia CK804 with ALC850 at irq 22
> 1 [UART ]: MPU-401 UART - MPU-401 UART
> MPU-401 UART at 0x330, irq 5
>
> > lspci | grep -i audio
>
> 00:0d.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
> Audio Controller (rev a2)
>
> > Regards,
> > Andrei
>
> Thanks for any help!


It doesn't help but I got the same problem with debian testing
and a VIA chipset and an AMD cpu while the same installation of debian testing got working audio on an Intel ICH5 chipset. (Both ASUS boards).
I'm at a loss too. I can't even figure out which update might have caused the problem. I just realized that audio wasn't working anymore and then realized that pulseaudio was installed, which is new to me.


Anyway: Cheers, Eike


speaker-test 1.0.20


Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 17 to 17832
Period size range from 8 to 8917
Using max buffer size 17832
Periods = 4
was set period_size = 4458
was set buffer_size = 17832
0 - Front Left
1 - Front Right
Time per period = 2.737839


[no sound, no friendly female voice ...]


lsmod:


Module Size Used by
via 34240 2
drm 65192 3 via
ppdev 6500 0
lp 8164 0
battery 10180 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 0
cpufreq_userspace 3172 0
freq_table 4224 2 cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 5960 0
nls_utf8 1760 6
cifs 208724 6
nls_base 6820 2 nls_utf8,cifs
ipv6 235364 20
reiserfs 189888 3
ext2 54504 1
fuse 42908 1
loop 12748 0
snd_mpu401 6152 0
snd_cs4232 11380 0
snd_opl3_lib 9344 1 snd_cs4232
snd_via82xx 20664 5
snd_ac97_codec 88484 1 snd_via82xx
snd_hwdep 6212 1 snd_opl3_lib
snd_cs4231_lib 20512 1 snd_cs4232
ac97_bus 1728 1 snd_ac97_codec
snd_pcm_oss 32832 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 5 snd_via82xx,snd_ac97_codec,snd_cs4231_lib,snd_pcm_oss
snd_page_alloc 7816 3 snd_via82xx,snd_cs4231_lib,snd_pcm
snd_mpu401_uart 6368 3 snd_mpu401,snd_cs4232,snd_via82xx
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18528 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
i2c_viapro 6836 0
snd_timer 17800 5 snd_opl3_lib,snd_cs4231_lib,snd_pcm,snd_seq
snd_seq_device 6380 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ns558 3712 0
i2c_core 19828 1 i2c_viapro
snd 45604 24 snd_mpu401,snd_cs4232,snd_opl3_lib,snd_via82xx,snd_ac97_codec,snd_hwdep,snd_cs4231_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 32336 0
gameport 10700 3 snd_via82xx,ns558
via_ircc 15764 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
pcspkr 2432 0
soundcore 6368 1 snd
serio_raw 4740 0
irda 95512 1 via_ircc
crc_ccitt 2080 1 irda
shpchp 25528 0
pci_hotplug 23460 1 shpchp
button 6096 0
evdev 8000 4
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 2 ext2,ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 8
ata_generic 4676 0
libata 140416 1 ata_generic
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
uhci_hcd 18672 0
osst 43388 0
st 30748 0
via_rhine 18664 0
mii 4896 1 via_rhine
via82cxxx 6948 0 [permanent]
ide_core 96136 4 ide_cd_mod,ide_disk,ide_pci_generic,via82cxxx
ehci_hcd 28396 0
usbcore 118224 3 uhci_hcd,ehci_hcd
aic7xxx 117592 0
scsi_transport_spi 19840 1 aic7xxx
scsi_mod 129324 5 libata,osst,st,aic7xxx,scsi_transport_spi
via_agp 7744 1
agpgart 28776 2 drm,via_agp
thermal 15228 0
processor 32544 2 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
dm_mod 46184 2 dm_mirror,dm_log


lspci:


00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)


cat /proc/asound/cards:


0 [V8235 ]: VIA8233 - VIA 8235
VIA 8235 with AD1980 at 0xe400, irq 22
1 [UART ]: MPU-401 UART - MPU-401 UART
MPU-401 UART at 0x330, irq 10




--
Eike Lantzsch ZP6CGE
Casilla de Correo 1519
1209 Asuncion / Paraguay
Phone: +595-21-578698 FAX: +595-21-578690
Cell-Phone: +595-981-939317



Reply to: