Re: Installing a Broadcom 4312 rev 02 wifi card
On Fri, 27 Feb 2009 15:39:55 +0100
Korrignu <korrignu@gmail.com> wrote:
...
> 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
...
> [ 630.553689] Broadcom 43xx driver loaded [ Features: PMLR,
> Firmware-ID: FW13 ]
>
> it seems weird that there is only one line about the b43 module...
The driver is definitely not picking up the card. Here's what it should look like:
[ 2620.611136] b43-phy2: Broadcom 4318 WLAN found (core revision 9)
[ 2620.626037] b43-phy2 debug: Found PHY: Analog 3, Type 2, Revision 7
[ 2620.626062] b43-phy2 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[ 2620.636899] phy2: Selected rate control algorithm 'minstrel'
[ 2620.637796] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
You should probably take this to the b43 mailing list. [Warning:
politeness and RTFM are important there.]
Celejar
--
mailmin.sourceforge.net - remote access via secure (OpenPGP) email
ssuds.sourceforge.net - A Simple Sudoku Solver and Generator
Reply to: