Re: Dell Studio Hybrid and Debian Lenny : GDM problem.
Hi,
I've found how to solve my problem.
If you want to use GDM with Dell Stydio Hybrid, you should add these
lines on xorg.conf :
Option "NoAccel" "false" # [<bool>]
Option "AccelMethod" "XAA"
Have a nice day,
2008/8/16 Florian / NothingHere <nothinghere@gmail.com>:
> Hi debian list,
>
> I've just buy and installed debian lenny on "Dell Studio Hybrid"
> (http://www.dell.com/content/products/productdetails.aspx/desktop-studio-hybrid?c=us&cs=19&l=en&ref=dthp&s=dhs).
>
> All seem good, except gnome/gdm.
>
> Here is a screenshoot of my problem :
> http://img397.imageshack.us/my.php?image=dsc00305xi8.jpg
> http://img397.imageshack.us/img397/1553/dsc00305xi8.jpg
>
> Who can help me ?
>
> I've created my xorg.conf with "Xorg -configure".
>
> Here it is :
>
> ---
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/etc/X11/rgb"
> ModulePath "/usr/lib/xorg/modules"
> FontPath "/usr/share/fonts/X11/misc"
> FontPath "/usr/share/fonts/X11/cyrillic"
> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/Type1"
> FontPath "/usr/share/fonts/X11/100dpi"
> FontPath "/usr/share/fonts/X11/75dpi"
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> EndSection
>
> Section "Module"
> Load "record"
> Load "extmod"
> Load "dri"
> Load "dbe"
> Load "glx"
> Load "xtrap"
> Load "GLcore"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> #DisplaySize 430 270 # mm
> Identifier "Monitor0"
> VendorName "SAM"
> ModelName "SyncMaster"
> ### Comment all HorizSync and VertRefresh values to use DDC:
> HorizSync 30.0 - 81.0
> VertRefresh 56.0 - 75.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "CacheLines" # <i>
> #Option "Dac6Bit" # [<bool>]
> #Option "DRI" # [<bool>]
> #Option "NoDDC" # [<bool>]
> #Option "ShowCache" # [<bool>]
> #Option "XvMCSurfaces" # <i>
> #Option "PageFlip" # [<bool>]
> Identifier "Card0"
> Driver "intel"
> VendorName "Intel Corporation"
> BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
> ---
>
> Of course, I've tryed different resolutions, depthcolor and without
> HorizSync dans VertRefresh... without success...
>
> And here is my :
> /var/log/gdm/:0.log
> with an error (I don't understand why I have an error) :
>
> ---
>
> X.Org X Server 1.4.2
> Release Date: 11 June 2008
> X Protocol Version 11, Revision 0
> Build Operating System: Linux Debian (xorg-server 2:1.4.2-3)
> Current Operating System: Linux Dell-Hybrid 2.6.24-1-amd64 #1 SMP Sat
> May 10 09:28:10 UTC 2008 x86_64
> Build Date: 02 August 2008 10:07:22PM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 15 21:55:12 2008
> (==) Using config file: "/etc/X11/xorg.conf"
> (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
> (II) Module "ddc" already built-in
> (II) Module "i2c" already built-in
> (II) Module "ramdac" already built-in
> (WW) intel(0): Failed to set up write-combining range (0xd0000000,0x10000000)
> Could not init font path element /usr/share/fonts/X11/cyrillic,
> removing from list!
> Could not init font path element
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list!
> (EE) intel(0): First SDVO output reported failure to sync
>
> ---
>
> I've done a :
>
> "lspci -n"
>
> and submit it to : http://kmuto.jp/debian/hcl/index.cgi
>
> Here it's back:
>
> PCI ID Supporté? Fabricant Matériel Pilote Commentaire
> 80862a00 Yes Intel Corporation Mobile PM965/GM965/GL960 Memory
> Controller Hub intel-agp v2.6.25
> 80862a01 - Intel Corporation Mobile
> PM965/GM965/GL960 PCI Express Root Port
> 80862a02 Yes Intel Corporation Mobile GM965/GL960
> Integrated Graphics
> Controller intelfb v2.6.26
> 80862a03 Yes Intel Corporation Mobile GM965/GL960
> Integrated Graphics
> Controller intel
> 80862834 - Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #4
> 80862835 - Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #5
> 8086283a - Intel Corporation 82801H (ICH8 Family)
> USB2 EHCI Controller #2
> 8086284b Yes Intel Corporation 82801H (ICH8 Family) HD Audio
> Controller snd-hda-intel v2.6.25
> 8086283f - Intel Corporation 82801H (ICH8 Family)
> PCI Express Port 1
> 80862843 - Intel Corporation 82801H (ICH8 Family)
> PCI Express Port 3
> 80862845 - Intel Corporation 82801H (ICH8 Family)
> PCI Express Port 4
> 80862830 - Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #1
> 80862831 - Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #2
> 80862832 - Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #3
> 80862836 - Intel Corporation 82801H (ICH8 Family)
> USB2 EHCI Controller #1
> 80862448 Yes Intel Corporation 82801 Mobile PCI
> Bridge i810_rng,hw_random
> 80862815 Yes Intel Corporation 82801HEM (ICH8M) LPC Interface
> Controller iTCO_wdt v2.6.25
> 80862850 Yes Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE
> Controller piix v2.6.25
> 80862829 Yes Intel Corporation 82801HBM/HEM
> (ICH8M/ICH8M-E) SATA AHCI
> Controller ahci v2.6.25
> 8086283e Yes Intel Corporation 82801H (ICH8 Family) SMBus
> Controller i2c-i801 v2.6.25
> 8086284f - Intel Corporation 82801H (ICH8 Family)
> Thermal Reporting Device
> 10ec8168 Yes Realtek Semiconductor Co., Ltd. High
> Definition Audio r8169 v2.6.25
> 197b2380 - JMicron Technologies, Inc. no information
> 14e44328 Yes Broadcom Corporation BCM4328 802.11a/b/g/n
> ssb v2.6.25
>
>
> I've loaded correct modules, without success (and I've not verified
> /var/log/gdm/:0.log when I've done changes... but with our without
> these modules loaded, I alway have this strange "text").
>
> Anyone have a tips ?
>
> Thanks,
>
Reply to: