Dell Studio Hybrid and Debian Lenny : GDM problem.
Hi debian list,
I've just buy and installed debian lenny on "Dell Studio Hybrid"
(http://www.dell.com/content/products/productdetails.aspx/desktop-studio-hybrid?c=us&cs=19&l=en&ref=dthp&s=dhs).
All seem good, except gnome/gdm.
Here is a screenshoot of my problem :
http://img397.imageshack.us/my.php?image=dsc00305xi8.jpg
http://img397.imageshack.us/img397/1553/dsc00305xi8.jpg
Who can help me ?
I've created my xorg.conf with "Xorg -configure".
Here it is :
---
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dri"
Load "dbe"
Load "glx"
Load "xtrap"
Load "GLcore"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 430 270 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
---
Of course, I've tryed different resolutions, depthcolor and without
HorizSync dans VertRefresh... without success...
And here is my :
/var/log/gdm/:0.log
with an error (I don't understand why I have an error) :
---
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-3)
Current Operating System: Linux Dell-Hybrid 2.6.24-1-amd64 #1 SMP Sat
May 10 09:28:10 UTC 2008 x86_64
Build Date: 02 August 2008 10:07:22PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 15 21:55:12 2008
(==) Using config file: "/etc/X11/xorg.conf"
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(II) Module "ramdac" already built-in
(WW) intel(0): Failed to set up write-combining range (0xd0000000,0x10000000)
Could not init font path element /usr/share/fonts/X11/cyrillic,
removing from list!
Could not init font path element
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list!
(EE) intel(0): First SDVO output reported failure to sync
---
I've done a :
"lspci -n"
and submit it to : http://kmuto.jp/debian/hcl/index.cgi
Here it's back:
PCI ID Supporté? Fabricant Matériel Pilote Commentaire
80862a00 Yes Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub intel-agp v2.6.25
80862a01 - Intel Corporation Mobile
PM965/GM965/GL960 PCI Express Root Port
80862a02 Yes Intel Corporation Mobile GM965/GL960
Integrated Graphics
Controller intelfb v2.6.26
80862a03 Yes Intel Corporation Mobile GM965/GL960
Integrated Graphics
Controller intel
80862834 - Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #4
80862835 - Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #5
8086283a - Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #2
8086284b Yes Intel Corporation 82801H (ICH8 Family) HD Audio
Controller snd-hda-intel v2.6.25
8086283f - Intel Corporation 82801H (ICH8 Family)
PCI Express Port 1
80862843 - Intel Corporation 82801H (ICH8 Family)
PCI Express Port 3
80862845 - Intel Corporation 82801H (ICH8 Family)
PCI Express Port 4
80862830 - Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #1
80862831 - Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #2
80862832 - Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #3
80862836 - Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #1
80862448 Yes Intel Corporation 82801 Mobile PCI
Bridge i810_rng,hw_random
80862815 Yes Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller iTCO_wdt v2.6.25
80862850 Yes Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE
Controller piix v2.6.25
80862829 Yes Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) SATA AHCI
Controller ahci v2.6.25
8086283e Yes Intel Corporation 82801H (ICH8 Family) SMBus
Controller i2c-i801 v2.6.25
8086284f - Intel Corporation 82801H (ICH8 Family)
Thermal Reporting Device
10ec8168 Yes Realtek Semiconductor Co., Ltd. High
Definition Audio r8169 v2.6.25
197b2380 - JMicron Technologies, Inc. no information
14e44328 Yes Broadcom Corporation BCM4328 802.11a/b/g/n
ssb v2.6.25
I've loaded correct modules, without success (and I've not verified
/var/log/gdm/:0.log when I've done changes... but with our without
these modules loaded, I alway have this strange "text").
Anyone have a tips ?
Thanks,
Reply to: