[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: can't print from adobe reader



On Thu, Jun 19, 2008 at 20:03:49 -0400, Paul Cartwright wrote:
> On Thu June 19 2008, Florian Kulzer wrote:
> > > I changed it to custom. With my printer selected, it showed:
> > > Status: lpq: Epson 880:unknown printer
> > > with custom selected, the printer command showed:
> > > /usr/bin/lp

[...]

> I changed it to custom and used /usr/bin/lpr as the command. It accepted it, 
> then did nothing. No error, but no print.

You should also try

/usr/bin/lpr -P EpsonR380
/usr/bin/lp -d EpsonR380

After failed attempts, check ~/.xsession-errors and /var/log/cups/*_log
for clues. If that does not produce anything useful, set "LogLevel
debug" (instead of "warning") in /etc/cups/cupsd.conf, restart cups(ys)
and try again. 

> > In an X terminal, what do you get from these commands:
> >
> > lpq
> # lpq
> no entries

Hmm, I see a line "XXX is ready" above the "no entries" one, where "XXX"
is the name of the default printer.

[...]

> paulandcilla:/etc/dhcp3# lpstat -t
> scheduler is running
> system default destination: EpsonR380
> device for Epson_880: usb://EPSON/Stylus%20COLOR%20880
> device for epson_greyscale: usb://EPSON/Stylus%20COLOR%20880
> device for EpsonR380: usb://EPSON/Stylus%20Photo%20R380
> device for HP_8100_photoSmart: 
> usb://HP/Photosmart%208100%20series?serial=MY4681M0GS040Z
> Epson_880 accepting requests since Sun 10 Feb 2008 12:42:12 PM EST
> epson_greyscale accepting requests since Sun 10 Feb 2008 12:43:20 PM EST
> EpsonR380 accepting requests since Thu 19 Jun 2008 06:42:49 PM EDT
> HP_8100_photoSmart accepting requests since Wed 30 Jan 2008 08:32:36 AM EST
> printer Epson_880 is idle.  enabled since Sun 10 Feb 2008 12:42:12 PM EST
> printer epson_greyscale is idle.  enabled since Sun 10 Feb 2008 12:43:20 PM 
> EST
> printer EpsonR380 is idle.  enabled since Thu 19 Jun 2008 06:42:49 PM EDT
> printer HP_8100_photoSmart is idle.  enabled since Wed 30 Jan 2008 08:32:36 AM 
> EST

That looks OK to me; let's hope that looking at the log files turns up
something.

-- 
Regards,            | http://users.icfo.es/Florian.Kulzer
          Florian   |


Reply to: