badblock can not be detected
Hi,
I have an hard drive that connects to my laptop through the USB 2.0 interface.it was bought at 2006. some months before, it started to report error on read. I reformatted it use the
mkfs.ext3 -c /dev/sda1
But it didn't detected any badblock.
then I copied some files to it, then read out, it shown the error:
usb 5-4.3: reset high speed USB device using ehci_hcd and address 5
sd 0:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sda, sector 214814735
usb 5-4.3: reset high speed USB device using ehci_hcd and address 5
I think that's because there are some badblocks on the disk, so I ran
fsck.ext3 -c /dev/sda1
but this time it still didn't find out any badblock.
any idea about it? thanks.
__________________________________________________________
Sent from Yahoo! Mail.
A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html
Reply to: