Re: kernel versus broadcom wlan
Just in case, that this information could be helpful. Here is the PCI
address of Broadcom WLAN interface:
# lspci
03:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan
mini-PCI (rev 02)
-------------------------------------------------------------------------------------
From /var/log/dmesg :
ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 17
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 17 (level,
high) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
WARNING: at drivers/ssb/main.c:883 ssb_tmslow_reject_bitmask()
Pid: 1459, comm: modprobe Not tainted 2.6.24-1-amd64 #1
Call Trace:
[<ffffffff8834a7cd>] :ssb:ssb_tmslow_reject_bitmask+0x4a/0x53
[<ffffffff8834b03d>] :ssb:ssb_device_is_enabled+0xf/0x3b
[<ffffffff8834d1ba>] :ssb:ssb_pcicore_init+0x19/0x4a
[<ffffffff8834a544>] :ssb:ssb_attach_queued_buses+0x9a/0x294
[<ffffffff8834bce0>] :ssb:ssb_pci_get_invariants+0x0/0x2b7
[<ffffffff8834ab53>] :ssb:ssb_bus_register+0x13d/0x1ac
[<ffffffff8834ac72>] :ssb:ssb_bus_pcibus_register+0x2a/0x4b
[<ffffffff8834c5a1>] :ssb:ssb_pcihost_probe+0x6f/0x9e
[<ffffffff8031d360>] pci_device_probe+0xd1/0x138
[<ffffffff80379be6>] driver_probe_device+0xf7/0x174
[<ffffffff80379d05>] __driver_attach+0x0/0x92
[<ffffffff80379d5f>] __driver_attach+0x5a/0x92
[<ffffffff80378fd2>] bus_for_each_dev+0x43/0x6e
[<ffffffff80379352>] bus_add_driver+0x77/0x1be
[<ffffffff8031d539>] __pci_register_driver+0x58/0x8a
[<ffffffff880ef045>] :ssb:ssb_modinit+0x45/0x5d
[<ffffffff80256ae8>] sys_init_module+0x16e3/0x1821
[<ffffffff8020be2e>] system_call+0x7e/0x83
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
----------------------------------------------------------------
And "ssb" gives out warning and trace at this pci-address.
Hugo
Reply to: