[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

nvidia dies hard after upgrade Sarge-Etch



Title: nvidia dies hard after upgrade Sarge-Etch

(from /var/log/Xorg.log.0)
...
(II) Initializing extension GLX

Backtrace:
0: /usr/bin/X(xf86SigHandler+0x84) [0x80c4354]
1: [0xb7fb6420]
2: /usr/bin/X(main+0x2aa) [0x806e4ba]
3: /lib/tls/libc.so.6(__libc_start_main+0xc8) [0xb7db3ea8]
4: /usr/bin/X(FontFileCompleteXLFD+0xa9) [0x806d9d1]

Fatal server error:
Caught signal 11.  Server aborting


It does load nvidia (see below), but has problems with GLcore and GLX:

$ cat Xorg.0.log

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux mybox 2.6.18-4-k7 #1 SMP Wed May 9 23:42:01 UTC 2007 i686
Build Date: 04 April 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 27 01:54:03 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
...
(II) Bus 1 prefetchable memory range:
        [0] -1  0       0xf4800000 - 0xfc8fffff (0x8100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV17 [GeForce4 MX 420] rev 163, Mem @ 0xfd000000/24, 0xf8000000/26, 0xfc880000/19, BIOS @ 0xfeae0000/17
(II) Addressable bus resource ranges are
...
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
dlopen: /usr/lib/xorg/modules/extensions/libGLcore.so: undefined symbol: _glapi_Dispatch
(EE) Failed to load /usr/lib/xorg/modules/extensions/libGLcore.so
(II) UnloadModule: "GLcore"
(EE) Failed to load module "GLcore" (loader failed, 7)
(II) LoadModule: "bitmap"
...
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(WW) Warning, couldn't open module speedo
(II) UnloadModule: "speedo"
(EE) Failed to load module "speedo" (module does not exist, 0)
(II) LoadModule: "type1"
...
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.7184
        Module class: XFree86 Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.1.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.1.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA X Driver  1.0-7184  Tue Aug  1 18:41:01 PDT 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
...
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX

Backtrace:
0: /usr/bin/X(xf86SigHandler+0x84) [0x80c4354]
1: [0xb7fb6420]
2: /usr/bin/X(main+0x2aa) [0x806e4ba]
3: /lib/tls/libc.so.6(__libc_start_main+0xc8) [0xb7db3ea8]
4: /usr/bin/X(FontFileCompleteXLFD+0xa9) [0x806d9d1]


This is what I have installed:

rc  nvidia-glx                        1.0.8776-4                        NVIDIA binary XFree86 4.x driver
ii  nvidia-glx-legacy                 1.0.7184-3                        NVIDIA binary Xorg driver (legacy version)
rc  nvidia-kernel-2.6.18-4-686        1.0.8776+6                        NVIDIA binary kernel module for Linux 2.6.18-4-686
ii  nvidia-kernel-common              20051028+1                        NVIDIA binary kernel module common files
ii  nvidia-kernel-legacy-2.6-k7       1.0.7184+6                        NVIDIA binary kernel module for 2.6 series compiled for k7
ii  nvidia-kernel-legacy-2.6.18-4-486 1.0.7184+6                        NVIDIA binary kernel module for Linux 2.6.18-4-486 (legacy versi
ii  nvidia-kernel-legacy-2.6.18-4-k7  1.0.7184+6                        NVIDIA binary kernel module for Linux 2.6.18-4-k7 (legacy versio


Some detail: I did reboot; with "nv" it works.

Any hint appreciated,

Uwe

Please Cc: to me; the list is too busy for my newsreader


Reply to: