WEP is possible, WPA not (wpa_supplicant)
Hello,
I have an intel 3945 wireless card, installed wpa_supplicant (via
apt-get, debian etch installation).
I want to use it with my dlink router but i am not able to use WPA.
The configuration for WEP works, but for WPA I never get an ip address
from the DHCP server.
This is my /etc/network/interfaces configuration:
iface eth2 inet dhcp
wpa-driver wext
wpa-conf /etc/network/wpa_home.conf
then, my /etc/network/wpa_home.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=2
fast_reauth=1
network={
ssid="ZWERVELWPA"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
psk="1234567890"
#
psk=b77c11d7a3bdd1b1f19e06c2b26128b25ba51719d165e557335157822bb8affc
priority=5
}
Via iwconfig I can see that eth2 is the right essid.
If I configure it for WEP, then it works but not via WPA
To start I type :
Ifup eth2
Is that correct to start like that ? please help, how can I make WPA
working.
Thnx,
Phil.
Disclaimer :
This e-mail is intended for the exclusive use by the person(s) mentioned as recipient(s).
If you are not the intended recipient, please notify us immediately.
This e-mail does not constitute any commitment for Sea-Ro Terminal N.V. or its subsidiaries except when expressly otherwise
agreed in a written agreement between the intended recipient and the originating subsidiaries of Sea-Ro Terminal N.V.
Sea-Ro Terminal and each of its subsidiaries each reserve the right to monitor all e-mail communications through its networks.
This mail has been checked for viruses by Symantec and Trend Micro.
Reply to: