Re: how to start the sound system
On Wed, Oct 18, 2006 at 02:11:59PM +0200, Kay Smarczewski wrote:
> On Wed, Oct 18, 2006 at 07:30:51AM +0200, Kay Smarczewski wrote:
> > On Wed, Oct 18, 2006 at 07:18:13AM +0200, Kay Smarczewski wrote:
> > > On Tue, Oct 17, 2006 at 09:43:01PM +0200, Kay Smarczewski wrote:
> > > > On Tue, Oct 17, 2006 at 08:17:07PM +0200, Florian Kulzer wrote:
> > > > > On Tue, Oct 17, 2006 at 17:17:36 +0200, Kay Smarczewski wrote:
> > > > > > On Mon, Oct 16, 2006 at 08:35:24PM +0200, Florian Kulzer wrote:
> > > > > > > On Mon, Oct 16, 2006 at 18:28:41 +0200, Jabka Atu wrote:
> > > > > > > > Howdy,...
> > > > > > > > i own acer 5102wlmi and im unable to start the sound system :
> > > > >
> > > > > [...]
> > > > >
> > > > > > > > im using
> > > > > > > > kernel Linux debian 2.6.8-12-amd64-k8-smp #1 SMP Mon Jul 17 00:17:20 UTC
> > > > > > > > 2006 x86_64 GNU/Linux
> > > > > > > >
> > > > > > > > when i start alsaconf i get no supported pci card.
> > > > > > > > i have installed alsa-utils alsa-base and alsa-oss
> > > > > > >
> > > > > > > Your kernel version suggests that you run Sarge. The version of alsa in
> > > > > > > Sarge might be too old to support your hardware. Please post the output
> > > > > > > of "lspci | grep -i audio" to let us know which soundcard is used. (That
> > > > > > > has higher chances of success than hoping that someone will know it
> > > > > > > directly from the model number of the laptop.)
> > > > >
> > > > > [...]
> > > > >
> > > > > >
> > > > > > I have the same laptop and the same problem.
> > > > > > The only difference is that i have the kernel 2.6.19rc2.
> > > > > >
> > > > > > lspci | grep -i audio :
> > > > > > 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
> > > > > >
> > > > > > I tried to compile alsa for myself because i think i have to use a newer
> > > > > > alsa. so i downloaded the 1.0.13rc3 and did the following:
> > > > >
> > > > > I don't have this card myself, but my 2.6.18 kernel sources suggest that
> > > > > it is supported:
> > > > >
> > > > > $ awk '/MODULE_SUPPORTED/,/MODULE_DESCRIPTION/' /usr/src/linux-source-2.6.18/sound/pci/hda/hda_intel.c
> > > > > MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
> > > > > "{Intel, ICH6M},"
> > > > > "{Intel, ICH7},"
> > > > > "{Intel, ESB2},"
> > > > > "{Intel, ICH8},"
> > > > > "{ATI, SB450},"
> > > > > "{ATI, SB600},"
> > > > > "{ATI, RS600},"
> > > > > "{VIA, VT8251},"
> > > > > "{VIA, VT8237A},"
> > > > > "{SiS, SIS966},"
> > > > > "{ULI, M5461}}");
> > > > > MODULE_DESCRIPTION("Intel HDA driver");
> > > > >
> > > > > AFAIK, alsa in the 2.6.18 kernel sources is the released version 1.0.13
> > > > > already and hence should be newer than 1.0.13rc3 (the 3rd release
> > > > > candidate for this version). Maybe it is better to try getting the sound
> > > > > to work with the released 2.6.18 kernel than with a release candidate
> > > > > for 2.6.19.
> > > > >
> > > > > What happens if you run "modprobe snd_hda_intel"? Do you get error
> > > > > messages? If you use udev, are /dev/snd, /dev/sndstat or /dev/mixer
> > > > > created?
> > > > >
> > > > i don't know why, i don't know how, but now the sound is working! :)
> > > >
> > > > i have just rebooted for the second time...
> > > >
> > > > but you're right, my original error was not invoking the intel-module in
> > > > the kernel.
> > >
> > > now i just have another problem: i use centericq. and if i get an
> > > message it sounds a little bit misterious. like playing the sound,
> > > cutting the last part and playing again...
> > > the files are wav. if i use the "play"-command on shell (used by
> > > centericq) the same happens.
> > > playing with mocp not works any more:
> > > mocp: interface_elements.c:3267: iface_set_mixer_value: Assertion `value
> > > >= 0 && value <= 100' failed.
> > >
> > > and if i do:
> > > alsamixer
> > > i get:
> > > hda_codec: num_steps = 0 for NID = 0xd
> > > alsamixer: function snd_mixer_load failed: Invalid argument
> > >
> > > modprobe snd_hda_intel don't throws any errors.
> > >
> > > the only thing i can here is a part of a title and that is replayed
> > > every minute or so....
> > >
> > > have you any ideas?
> > >
> > > Kay
> >
> > additionally i get this while playing something:
> > hda-intel: invalid position buffer, using LPIB read method instead
> >
> > on boot i get also many hda_codec-errors. but i don't know where they
> > are listed, because dmesg is full with messages like this:
> > evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 31
> > evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 31, Value: 0
> > evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
> > evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 28
> > evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 28, Value: 1
> > evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
> >
> > Please give me some advise!
> >
> > Kay
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >
> >
>
> Now i've found out another even more curious thing: everytime i purge
> alsa-base, alsa-utils and linux-sound-base the sound works. but after
> rebooting i get only the errors and no sound :(
>
> on booting i get:
> hda_codec: invalid dep_range_va l
oh, i forgot: playing .wav-files with aplay works without any errors.
can it be the codec or something like that?
Reply to: