Re: how to start the sound system
On Mon, Oct 16, 2006 at 08:35:24PM +0200, Florian Kulzer wrote:
> On Mon, Oct 16, 2006 at 18:28:41 +0200, Jabka Atu wrote:
> > Howdy,...
> > i own acer 5102wlmi and im unable to start the sound system :
> >
> > debian:/home/mha13# lsmod|grep snd
> > snd_seq_oss 35840 0
> > snd_seq_midi 9792 0
> > snd_rawmidi 27556 1 snd_seq_midi
> > snd_seq_midi_event 9728 2 snd_seq_oss,snd_seq_midi
> > snd_seq_device 9612 3 snd_seq_oss,snd_seq_midi,snd_rawmidi
> > snd_seq 58816 5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> > snd_ioctl32 17920 0
> > snd_pcm_oss 57704 0
> > snd_mixer_oss 20032 1 snd_pcm_oss
> > snd_pcm 105864 2 snd_ioctl32,snd_pcm_oss
> > snd_page_alloc 13904 1 snd_pcm
> > snd_timer 26440 2 snd_seq,snd_pcm
> > snd 58952 11
> > snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq_midi_event,snd_seq_device,snd_seq,snd_ioctl32,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> >
> > soundcore 12000 1 snd
> > im using
> > kernel Linux debian 2.6.8-12-amd64-k8-smp #1 SMP Mon Jul 17 00:17:20 UTC
> > 2006 x86_64 GNU/Linux
> >
> > when i start alsaconf i get no supported pci card.
> > i have installed alsa-utils alsa-base and alsa-oss
>
> Your kernel version suggests that you run Sarge. The version of alsa in
> Sarge might be too old to support your hardware. Please post the output
> of "lspci | grep -i audio" to let us know which soundcard is used. (That
> has higher chances of success than hoping that someone will know it
> directly from the model number of the laptop.)
>
> --
> Regards,
> Florian
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
I have the same laptop and the same problem.
The only difference is that i have the kernel 2.6.19rc2.
lspci | grep -i audio :
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
I tried to compile alsa for myself because i think i have to use a newer
alsa. so i downloaded the 1.0.13rc3 and did the following:
tar -xfj alsa-driver-1.0.13rc3
cd alsa-driver-1.0.13rc3/
./configure --with-cards=hda-intel --with-sequencer=yes;make;
and got these errors:
make[1]: Entering directory `/usr/src/linux-2.6.19rc2'
CC [M] /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.o
In Datei, eingefügt von
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.c:1:
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.inc:1:26: Fehler:
linux/config.h: Datei oder Verzeichnis nicht gefunden
In file included from
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.inc:13,
from
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.c:1:
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:742:
Fehler: Redefinition von »jiffies_to_msecs«
include/linux/jiffies.h:268: Fehler: Vorherige
Definition von »jiffies_to_msecs« war hier
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:761:
Fehler: Redefinition von »msecs_to_jiffies«
include/linux/jiffies.h:290: Fehler: Vorherige
Definition von »msecs_to_jiffies« war hier
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:
In Funktion »snd_pci_orig_save_state«:
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:1099:
Fehler: zu viele Argumente für Funktion
»pci_save_state«
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:
In Funktion »snd_pci_orig_restore_state«:
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:1103:
Fehler: zu viele Argumente für Funktion
»pci_restore_state«
make[4]: ***
[/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.o]
Fehler 1
make[3]: ***
[/usr/src/alsa/alsa-driver-1.0.13rc3/acore] Fehler 2
make[2]: ***
[_module_/usr/src/alsa/alsa-driver-1.0.13rc3] Fehler
2
make[1]: *** [modules] Fehler 2
make[1]: Leaving directory `/usr/src/linux-2.6.19rc2'
make: *** [compile] Fehler 2
and so i could not execute make install.
i tried also this:
Creating /etc/modutils/mythings with following content:
alias snd-card-0 snd-hda-intel
options snd-hda-intel model=acer position_fix=1 enable=yes
and execute:
# update-modules.modutils
and got:
Architecture-specific modutils configuration for x86_64 not found, using
defaults
i don't know what i can do. can someone help us please?
Kay
Reply to: