[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: No more sound with Alsa under Debian testing



> >
> > 1/ Several weeks ago, the sound stopped working after each reboot. To
> > solve that, i run "alsaconf", which detected the sound card, then
> > reloaded the modules, and the sound worked after that... but only up to
> > the next reboot.
> >
> > 2/ For a few days, i have no sound at all. I mean, even running
> > alsaconf doesn't solve the problem :(
> >
> > SOS !!
> >
> > Thanks in advance for any suggestion.
> >
> You could try putting the sound card module in /etc/modules which will
> ensure it's loaded at boot which should sort problem 1.
>
> Not sure how you address 2.

Hello.
Thanks for your proposition.
Unfortunatly, for a few days, i have no sound at all. But the command
"lsmod |grep snd" returns

snd_cmipci             31296  0
gameport               14344  1 snd_cmipci
snd_pcm_oss            35968  0
snd_mixer_oss          15872  1 snd_pcm_oss
snd_pcm                74532  2 snd_cmipci,snd_pcm_oss
snd_page_alloc          9512  1 snd_pcm
snd_opl3_lib            9824  1 snd_cmipci
snd_timer              20836  2 snd_pcm,snd_opl3_lib
snd_hwdep               8676  1 snd_opl3_lib
snd_mpu401_uart         7520  1 snd_cmipci
snd_rawmidi            22560  1 snd_mpu401_uart
snd_seq_device          7756  2 snd_opl3_lib,snd_rawmidi
snd                    48100  10
snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               9216  1 snd


which seems to indicate that the module is actually loaded.


nico
>
> > Just a remark, which might have some importance, i don't know : When i
> > lauch alsaconf, it detects 2 "sound cards" :
> > * cmipci C-Media Electronics Inc CM8738 (rev 10)              ¦
> > * legacy Probe legacy ISA (non-PnP) chips
> >
> > I don't know what the second one is, since i have only 1 sound card,
> > and no integrated sound card on the mother board.
>
> The second is a generic driver for your card which you could use if
> there wasn't a specific driver for your card.
>
> Regards
>
> Clive
>
> --
> www.clivemenzies.co.uk ...
> ...strategies for business
>
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: