Re: cd copy/read errors
On Fri, Jun 30, 2006 at 01:29:02PM -0500, dan_elliott@cox.net wrote:
> Hello,
>
> I am thoroughly confused. I have been attempting to burn an exact copy of a disc containing proprietary software for backup purposes (disc is expensive). I have found many similar posts on many mailing lists but none solve my issue. This is what I have tried thus far:
>
> $ cat /dev/cdrom > blah.iso
> <see error example below>
>
> $ isoinfo -d -i /dev/hdc
> CD-ROM is in ISO 9660 format
> System id: Solaris
> Volume id: MATLAB_SV14
> Volume set id:
> Publisher id: The MathWorks,Inc
> Data preparer id:
> Application id: MATLAB
> Copyright File id:
> Abstract File id:
> Bibliographic File id:
> Volume set size is: 1
> Volume set sequence number is: 1
> Logical block size is: 2048
> Volume size is: 335261
> Joliet with UCS level 3 found
> Rock Ridge signatures version 1 found
>
> dd if=/dev/cdrom bs=2048 count=335261 > blah2.iso
Try
dd if=/dev/cdrom of=blah2.iso
>
> All of the above commands result in many errors resembling following error:
>
> ide: failed opcode was: unknown
> end_request: I/O error, dev hdb, sector 4676
> printk: 1 messages suppressed.
> Buffer I/O error on device hdb, logical block 1169
> hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
> hdb: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
>
> I can mount and run programs off of this disk, so I know it is readable. Is there some copy protection feature?
>
> Thank you.
>
> -- dan elliott
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
Paul E Condon
pecondon@mesanetworks.net
Reply to: