[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: PalmOS devices conflict with the kernel image?

On Sun, Jun 04, 2006 at 08:51:32AM -0400, Jim Seymour wrote:

> Currently I am able to sync my Palm VX with Evolution, jpilot or use the
> pilot link tools via command line. I am running Etch with kernel 2.6.15,
> udev 0.019-2, yaird 0.0.12-9. Hotplug is not installed and this is a
> serial connection to the cradle. Not sure what your connection is but
> don't give up yet. Do I remember reading back in this thread that your
> connection is usb?

Yes, USB.  That's the problem--normally (meaning "back when it worked")
hotplug would create /dev/ttyUSB0 and /dev/ttyUSB1 when I pressed the "sync"
button on the cradle, and /dev/pilot was linked to the first.  Now
/var/log/messages shows a new USB device being detected by the USB
subsystem, but nothing links it to any device file.
Carl Fink                                   carl@finknetwork.com
   "Patriotism is supporting your country all the time, and your
   government when it deserves it."
                      - Mark Twain

Reply to: