[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: raid 1

	hello Jacek,

	Check out the howto link for a raid1 install from sarge installer.

	It may help you get the raid 1 up and running


             peter colton

On Monday 29 May 2006 16:15, jacek wrote:
> Hi all,
> I set up raid 1 during installing system with kernel 2.4.27-2, then i used
> mdadm to create mdadm.conf file . my hard drives was detected as
> /dev/hdc[1-9] /dev/hde[1-9] because the kernel was missing proper drivers ,
> so then i compiled new kernel 2.6.16 and drives changed their names to
> /dev/sda[1-9] and /dev/sdb[1-9] after that i could not boot from raid at
> all.  Even if boot from live cd assemble raid with /dev/sda[1-9]
> /dev/sdb[1-9] , create mdadm.conf file with proper names , during the boot
> it still wanted reassemble raid using /dev/hdc /dev/hde names?? , ( of
> course it complained that it couldn't find these devices ).
> Have you ever had such problem ?
> Any help appreciate
> Jacek

Reply to: