[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Make HAL leave my CD-ROM alone



I am having hard time trying to make HAL stop polling IDE CD-ROM drive.
The "storage.media_check_enabled" key is set to "false", but that does
not seem to make any difference.

I have also tried various combinations of...

 storage.automount_enabled_hint
 storage.media_check_enabled
 storage.no_partitions_hint

...but to no avail.

Am I missing something? Or is this a bug?

 Debian unstable/experimental
 linux  2.6.16.7 (vanilla)
 hal    0.5.7-1
 udev   0.090-1
 dbus   0.61-5


udi = '/org/freedesktop/Hal/devices/storage_model_CD_W58E'
  info.addons = {'hald-addon-storage'} (string list)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_W58E'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_CD_W58E'  (string)
  storage.cdrom.write_speed = 1411  (0x583)  (int)
  storage.cdrom.read_speed = 5645  (0x160d)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvd = false  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.requires_eject = true  (bool)
  storage.hotpluggable = false  (bool)
  info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
  info.category = 'storage'  (string)
  info.product = 'CD-W58E'  (string)
  storage.removable = true  (bool)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_0'  (string)
  storage.firmware_version = '1.0A'  (string)
  storage.vendor = ''  (string)
  storage.model = 'CD-W58E'  (string)
  storage.drive_type = 'cdrom'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.media_check_enabled = false  (bool)
  storage.no_partitions_hint = true  (bool)
  storage.bus = 'ide'  (string)
  block.is_volume = false  (bool)
  block.minor = 0  (0x0)  (int)
  block.major = 22  (0x16)  (int)
  block.device = '/dev/hdc'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_0'  (string)
  linux.sysfs_path_device = '/sys/block/hdc'  (string)
  linux.sysfs_path = '/sys/block/hdc'  (string)

Reply to: