problem with SATA on 945p motherboard
Hello debian-user,
I have a server with a Giga-byte 8i945p-g motherboard and 2 Maxtor 200Gb
SATA disks.
I have the backports' 2.6.15 kernel installed.
The server is running fine, but suddenly, it writes errors on dmesg and
it locks.
I thought the problem was the disk, but lspci poorly identifies the chipset:
# lspci
0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2770 (rev 81)
0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2771 (rev 81)
0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 27d0 (rev 01)
0000:00:1c.2 PCI bridge: Intel Corp.: Unknown device 27d4 (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 27b8 (rev 01)
0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 27c0 (rev 01)
0000:00:1f.3 SMBus: Intel Corp.: Unknown device 27da (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0161 (rev a1)
0000:03:00.0 Ethernet controller: Broadcom Corporation: Unknown device
169d (rev 11)
My dmesg errors:
......
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0xd0 { Busy }
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
end_request: I/O error, dev sda, sector 9799136
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0xd0 { Busy }
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
end_request: I/O error, dev sda, sector 9799144
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0xd0 { Busy }
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
end_request: I/O error, dev sda, sector 9799152
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
...and so on until the machine locks
¿anyone have any idea?
Many thanks
--
--------------------^v^------------------------
Javier Bernal Dto. Técnico de Sistemas.
Computer Bios S.L (ComBios) tel:963941693
jbernal@combios.es soporte@combios.es
-----------------------------------------------
Reply to: