Re: kernel configuration question
On 12/28/05, Chinook <chinook.nr@tds.net> wrote:
> I'm trying to install mkcdrec
> (http://mkcdrec.ota.be/project/introduction.html)
> and in the instructions it says:
>
> Check current kernel if the following items were compiled into the
> kernel. Check file /usr/src/linux/.config :
> CONFIG_BLK_DEV_IDECD=y (or m)
> CONFIG_BLK_DEV_LOOP=y (or m)
> CONFIG_ISO9660_FS=y (or m)
> CONFIG_JOLIET=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=4096 (or 8192)
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_MSDOS_FS=y (or m)
>
> If you have a SCSI CD-ROM check also the following items in
> /usr/src/linux/.config:
> CONFIG_SCSI=y (or m)
> CONFIG_BLK_DEV_SR=y (or m)
>
> My DVD is ATAPI so I presume the SCSI is not applicable.
>
> Anyway, in /usr/src I had nothing so I installed kernel-source-2.4.27
> and now have a bz2 archive there. In previewing the archive though, I
> see no /linux/.config :-P
>
> Will someone please tell me how I can verify the settings. This is the
> only thing I've found to create a full bootable DVD clone of my system.
> If you perhaps know better, please point me in the right direction :-)
>
> Thank you for any guidance,
> Lee C
I think the config for your kernel should be under /boot/
eg /boot/config-2.6.12-1-686
Kelly
Reply to: