I have an onboard VIA sound chip which I am upgrading to a Soundblaster
Audigy LS PCI card - I have disabled the VIA onboard chip in BIOS and am
trying to get the Audigy card to work. No luck...
The card uses the snd-ca0106 driver, which is compiled as a module in my
kernel. I used 'alsaconf' to set it up:
It told me:
"Following card(s) are found on your system:
ca0106 Creative Labs SB Audigy LS"
which seems promising.
The following screens seems to show success, but when it tries to load
the driver at the end, the following appears after "Loading driver", but
before "Setting volumes":
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
Model 100a Rev 00000000 Serial 100a1102
AC'97 0 does not respond - RESET
AC'97 0 access is not valid [0x0], removing mixer.
CA0106: probe of 0000:01:08.0 failed with error -5
and sound won't work, even after a reboot.
Some ALSA info:
# cat /proc/asound/cards
--- no soundcards ---
# cat /proc/asound/devices
33: : timer
# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
(Apparently relevant) modules loaded at this stage:
Module Size Used by
snd_ca0106 30820 0
snd_ac97_codec 82488 1 snd_ca0106
snd_pcm_oss 54560 0
snd_mixer_oss 19904 1 snd_pcm_oss
snd_pcm 96008 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_timer 26372 1 snd_pcm
snd 55588 7 snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10400 1 snd
snd_page_alloc 9924 2 snd_ca0106,snd_pcm
[...]
What's wrong here? Any suggestions?
Dave.
--
Dave Ewart - davee@sungate.co.uk - jabber: davee@jabber.org
All email from me is now digitally signed, key from http://www.sungate.co.uk/
Fingerprint: AEC5 9360 0A35 7F66 66E9 82E4 9E10 6769 CD28 DA92
Attachment:
signature.asc
Description: Digital signature