Tom Deconinck wrote:
> I'm trying to add a second gigabit ethernet nic to my system.
> It's an Intel PRO/1OOOGT. (82541PI chip)
A good chipset.
> It shows up when i do lspci
> So I load the e1000 kernel module... but nothing happens, lsmod shows
> it is loaded but that is it.
>
> I guess i need some way to link the newly added card to eth1?
> I added eth1 to /etc/network/interfaces but when if ifup eth1 it dies
> saying no invalid device eth1.
Did you modify /etc/network/interfaces to configure the new device?
auto eth1
iface eth1 inet dhcp
For DHCP. Or you could use something like the following for a static IP.
auto eth1
iface eth1 inet static
address 192.0.34.166
netmask 255.255.255.0
network 192.0.34.0
broadcast 192.0.34.255
gateway 192.0.34.1
Bob
Attachment:
signature.asc
Description: Digital signature