Re: usb issues in sarge: scanner, multicard
Everything below occurred after a fresh reboot.
On Sat, Aug 13, 2005 at 11:23:35PM -0400, Antonio Rodriguez wrote:
> I am going to add the following, which may be relevant:
>
> tail -f /var/log/messages
> Aug 13 23:16:56 localhost gconfd (trc-4692): Resolved address
> "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
> configuration source at position 2
> Aug 13 23:17:00 localhost kernel: usb 2-1: control timeout on ep0in
> Aug 13 23:17:03 localhost gconfd (trc-4692): Resolved address
> "xml:readwrite:/home/trc/.gconf" to a writable configuration source at
> position 0
> Aug 13 23:17:05 localhost kernel: usb 2-1: control timeout on ep0in
> Aug 13 23:17:10 localhost kernel: usb 2-1: control timeout on ep0in
> Aug 13 23:17:11 localhost kernel: parport0: PC-style at 0x378 (0x778)
> [PCSPP,TRISTATE]
> Aug 13 23:17:11 localhost kernel: parport0: irq 7 detected
> Aug 13 23:17:11 localhost kernel: parport0: Printer, hp deskjet 5550
> Aug 13 23:17:11 localhost kernel: lp0: using parport0 (polling).
> Aug 13 23:17:16 localhost kernel: usb 2-1: control timeout on ep0in
>
> Message from syslogd@localhost at Sat Aug 13 23:17:46 2005 ...
> localhost kernel: Disabling IRQ #193
> Aug 13 23:17:46 localhost last message repeated 6 times
> Aug 13 23:17:46 localhost kernel: [__report_bad_irq+42/144]
> __report_bad_irq+0x2a/0x90
> Aug 13 23:17:46 localhost kernel: [note_interrupt+112/176]
> note_interrupt+0x70/0xb0
> Aug 13 23:17:46 localhost kernel: [do_IRQ+352/416] do_IRQ+0x160/0x1a0
> Aug 13 23:17:46 localhost kernel: [common_interrupt+24/32]
> common_interrupt+0x18/0x20
> Aug 13 23:17:46 localhost kernel: [default_idle+0/64]
> default_idle+0x0/0x40
> Aug 13 23:17:46 localhost kernel: [default_idle+44/64]
> default_idle+0x2c/0x40
> Aug 13 23:17:46 localhost kernel: [cpu_idle+59/80] cpu_idle+0x3b/0x50
> Aug 13 23:17:46 localhost kernel: [printk+366/448] printk+0x16e/0x1c0
> Aug 13 23:17:51 localhost kernel: usb 2-1: control timeout on ep0in
> Aug 13 23:18:16 localhost last message repeated 5 times
>
> Notice that the line
> Message from syslogd@localhost at Sat Aug 13 23:17:46 2005 ...
> and all after it appeared after conecting the multicard. I disconected
> the multicard without response. Hmm, sounds not good.
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: