Re: installing D-Link DWL-650 (16-bit) on sid
Paul Scott wrote:
What modules do I need to install D-Link DWL-650 (16-bit) on sid w/
2.6.12 kernel or do I need to build a kernel? First it's not clear
what chip set. lspci doesn't give me anything. The hostap modules
which support prism and provide prism2_cs are only available for the
2.6.8 kernel.
Don't know about the 2.6.12 kernel but backing up to 2.4.27 using
wlan-ng I now get :
Aug 8 04:02:38 light cardmgr[1189]: socket 1: D-Link DWL-650 11Mbps
802.11b WLAN Card
Aug 8 04:02:39 light kernel: prism2cs_init: prism2_cs.o: 0.2.1-pre21 Loaded
Aug 8 04:02:39 light kernel: prism2cs_init: dev_info is: prism2_cs
Aug 8 04:02:39 light kernel: prism2_cs: GetNextTuple: No more items
Aug 8 04:02:39 light kernel: prism2sta_config: NextTuple failure? It's
probably a Vcc mismatch.
Aug 8 04:02:39 light kernel: prism2sta_event: prism2_cs: Initialization
failed!
Aug 8 04:02:40 light cardmgr[1189]: get dev info on socket 1 failed:
Resource temporarily unavailable
I'm not near an access point but is there one more problem before seeing
the network?
The battery in this laptop doesn't hold a charge but it runs from the
adapter. cardctl info gives:
function 0: [ready], [bat low]
Could that be the Vcc mismatch mentioned above?
TIA,
Paul
Reply to: