Re: cdrecord and kernel 2.6.8-2-686
On Sat, 2005-05-14 at 00:08 +0200, Vegard|drageV wrote:
> I installed kernel image 2.6.8-2-686 today as an experimental
> substitute for kernel 2.4.27-1-386.
>
> When trying to run k3b, it hangs at splash image, and k3bsetup2 will
> not start.
> the cd-recorder is this device:
>
> lrwxrwxrwx 1 root cdrom 3 2005-05-13 23:47 /dev/cdrw -> hdd
> brw-rw---- 1 root cdrom 22, 64 2005-05-13 23:47 /dev/hdd
>
>
> cdrecord -scanbus shows this:
-----8<---- (snipped)
The fact that cdrecord -scanbus is showing you nothing is unsurprising.
What you really want to be doing is:
cdrecord -scanbus dev=ATA
That will scan your ATA devices rather than just your SCSI devices as is
the default.
>
>
> and lsmod this:
> hjem:~# lsmod
> Module Size Used by
> ipv6 264644 8
> lp 11176 0
-----8<---- (snipped)
what was your setup on 2.4.x? were you using ide_scsi?
-davidc
Reply to: